High temperature paint is suitable for wood burning stoves, metal chimeneas, BBQs, fire pits, and fire baskets, withstanding temperatures of up to 650 degrees Celsius.
For best results, this product should be used on bare metal, any surface should be clean, dry and free from dust and grease. Existing painted surfaces should be prepared to provide a good key for the new paint to adhere to. In order to check for compatibility between paints, you should always test the paint on a small inconspicuous area first and follow the heat up procedure outlined below. We cannot guarantee compatibility with all paints, so this procedure must be followed.
If a blockage occurs, remove nozzle with a twisting motion and clean. Never stick sharp objects into the can. gently replace nozzle with a twisting motion pointing away form you. for cleaning purposes, invert can and spray for a few seconds until only clear solvent escapes. During the painting process, whilst drying and for the first three times, you can use the appliance open widows, doors, and if necessary use fans for fresh air flow as the paint may give off fumes and smoke. Use kindling only on the first two fires burning for 15 to 20 minutes with a second burn being started whiles the appliance is still warm. A full fire should be burnt for 45 to 60 minutes again starting while the stove is still warm, then allow to cool naturally.
This product cannot be used on vitrous enamel surfaces and is suitable only for metal substrates. We cannot confirm its suitability on any other surfaces or materials.
- Materials: Ask for detailed contents sheet
- Made in the United Kingdom
- 400ml Capacity easy to apply aerosol spray
See something odd?
Report it here