Adhesive, Plastic Decorative Plate (Set of 5)

Invisible Disc Plate Hangers – Self Adhesive Hooks for Decorative Plates & Picture Hanging (Mix Set) Display your decorative plates and wall art with ease using these invisible disc plate hangers, available in 5 individual sizes or a convenient mixed-size set. These self-adhesive disk hangers stick flat to the back of plates, tiles, or frames, allowing you to mount them seamlessly on your walls with no visible wires, clips, or damage. Each hanger uses a high-tack adhesive activated by water, forming a strong, lasting bond with smooth surfaces such as porcelain, china, ceramic, wood, or glass. Ideal for both lightweight and heavier pieces depending on the disc size. How to Use: 1. Clean the back of the plate thoroughly – even if it’s new. Rub with a little scouring cream or powder, rinse, and let dry completely. 2. Activate the adhesive – Use your fingers to mix a little water into the glue on the back of the disc. Wait 5–10 minutes until it becomes tacky. 3. Apply to the plate – Position the disc so the ring is correctly aligned for your hanging setup. Press firmly, smoothing out air bubbles. 4. Leave overnight to dry – Allow at least 24 hours for full bonding before hanging. 5. Test adhesion – Before hanging, pull gently but firmly on the ring to ensure it’s securely attached. How to Remove a Disc: To remove, simply soak the plate in warm water. The disc will release safely without damaging your plate or its markings. This makes it a great solution for renters, collectors, and decorators who value preservation. Whether you're hanging cherished heirlooms, modern ceramics, or DIY art pieces, this invisible plate hanger set provides a clean, secure, and flexible wall-mounting option.