Showing results for "full size bed rails with hooks"

These high quality electric heated towel rails have a contemporary design and provide high heat output to warm your towels as well as your bathroom. Made from hard wearing steel with a durable high quality chrome finish, it not only makes your bathroom look great but keeps it warm and snug too.-Pressure tested to a maximum of 10 bar-Fixing pack with plugs & vents included-Made to the highest BS EN 442 standardsFEATURES AND BENEFITS:-Curved models-All sizes have high heat output-Made from high grade low carbon steel-Manufactured in accordance with BS EN 442-Electric element comes pre-installed-Electric cable is approximately 1m in lengthIMPORTANT DETAILS:We suggest you ask a qualified electrician to install these items

• Curved heated towel rails
• Pre-installed electric element
• Manual Electric Warmer Ladder

For those properties without central heating, here we have a pre-filled electric towel rail which comes complete with a 300-watt thermostatic type electric heating element, blanking plugs and it is pre-filled with a deionised water-based solution containing a mix of central heating preservatives and inhibitors. No other parts are required to install and run this towel rail as electric only. Simply remove one of the blanking plugs from the bottom of the towel radiator (opposite side of the bleed valve. If the bleed valve is on top-right, remove the blanking plug from bottom-left), insert and secure the electric heating element supplied to this inlet point and affix the radiator using the brackets supplied on to your wall, connect thermostatic heating element to your fused spur power outlet. Thermostatic electric heating element supplied has a range from 0 to 65 Celsius degrees and a red led light to indicate ON/OFF state. As you turn the heat control knob to the required level, the red led light will come ON to indicate that the element is heating the water-based solution inside. After the initial heat up, the element starts to regulate itself keeping the water temperature at the same level during which the red led light will come ON and OFF regularly.

• Overall Product Weight: 10kg
• Power Source: Unavailable

Prefilled Towel Rail Features  -Contemporary style, fit any kinds of interior design.  -Modern manufactured finish process makes radiators smooth and elegant looking.  -Tested under high hydraulic pressure to ensure impermeability.  -1/2" inlets and outlets.  -Valves are not included.  -Prefilled with a Glycol Solution  Specification  -Material: low carbon steel  Certification  -Powder coated finish to exceed 200 hours of neutral acid salt spray testing.  -Tested to BS & EN442.  -Complies with ISO9001:2008 regulations.  -Complies with UKCA regulations.  Thermostatic Heating Element Stylish and high-quality thermostatic towel rail element with touchscreen interface, this element is the best choice for bathroom towel rails or designer radiator. The controller is equipped with 4 modes: Constant temperature, Timer mode, Eco mode, and Anti-freeze mode. You can set the temperature to 1~5 stages which are 30℃、40℃、50℃、60℃、70℃. The time setting range is 2~10 hours with 2H increments.  Features  -LCD Display & Touch screen Operation: easy to read and operate  -System modes: Constant temperature / Timer mode / Eco mode / Anti-freeze mode  Specification  -Power: AC230V/50HZ  -Temperature setting range: 30～70℃  -Connection Size: 1/2" BSP connection thread  -IP Rating: IPX4  -Appliance Class: Class 1  -Cable Length: 1.1m approx.  -Comes with T-piece and blanking plug  -UKCA and CE approved  

• Curved Electric Heated Towel Rail
• LCD Display & Touch Screen Thermostatic Heating Element
• Prefilled with a glycol solution

These high quality electric heated towel rails have a contemporary design and provide high heat output to warm your towels as well as your bathroom. Made from hard wearing steel with a durable high quality chrome finish, it not only makes your bathroom look great but keeps it warm and snug too.-Pressure tested to a maximum of 10 bar-Fixing pack with plugs & vents included-Made to the highest BS EN 442 standardsFEATURES AND BENEFITS:-Curved models-All sizes have high heat output-Made from high grade low carbon steel-Manufactured in accordance with BS EN 442-Electric element comes pre-installed-Electric cable is approximately 1m in lengthIMPORTANT DETAILS:We suggest you ask a qualified electrician to install these items

• Curved heated towel rails
• Pre-installed electric element
• Manual Electric Warmer Ladder

• Overall Product Weight: 3kg

For those properties without central heating, here we have a pre-filled electric towel rail which comes complete with a 600-watt thermostatic type electric heating element, blanking plugs and it is pre-filled with a deionised water-based solution containing a mix of central heating preservatives and inhibitors. No other parts are required to install and run this towel rail as electric only. Simply remove one of the blanking plugs from the bottom of the towel radiator (opposite side of the bleed valve. If the bleed valve is on top-right, remove the blanking plug from bottom-left), insert and secure the electric heating element supplied to this inlet point and affix the radiator using the brackets supplied on to your wall, connect thermostatic heating element to your fused spur power outlet. Thermostatic electric heating element supplied has a range from 0 to 65 Celsius degrees and a red led light to indicate ON/OFF state. As you turn the heat control knob to the required level, the red led light will come ON to indicate that the element is heating the water-based solution inside. After the initial heat up, the element starts to regulate itself keeping the water temperature at the same level during which the red led light will come ON and OFF regularly.

• Overall Product Weight: 15kg