Ming Kids Square Interactive Table

Bought for my daughter. Looks v. nice and love the practicality of the reversible table top and drawers. Also the table slightly overhangs the legs meaning you can push it flush to the wall despite skirting board i.e. no risk of toys/pencils disappearing down a gap at the back. Unfortunately there were some quality issues with mine, and there shouldn't be any at this price point. Firstly the reversible table top (wood with lego board glued to one side) came slightly warped, so whole table top wobbles with an annoying click when trying to fix your legos on there. You wouldn't spot this until you've assembled the whole thing as it's the final step in the assembly process. I had to solve this by gluing some rubber protectors on underside of the board. Secondly rather than one v. large lego base sheet, the lego side of the table top consists of 2 sheets glued alongside each other, which would be fine if they were glued exactly flush but on ours there is a small gap between the two boards which means you can only fix your legos on one half or the other (if you try to put pieces in the middle, straddling the join, they don't fix as the gap means the raised circles are too wide apart). Thirdly the screw holes on one leg hadn't been drilled deeply enough/wide enough, making it v. hard work to screw in, and I almost completely stripped the screw heads getting them in. Took 1/2 hr to assemble which was fine.