The mid -height bed from the Scott collection, with a slide and a bed surface of 90 x 200cm, is ideal for playing and sleeping. An adventure playground in the children's room. The item is made of solid pine and the surface is painted white. The textile set in the design "Princess Sophie", consisting of the curtain with the great depiction of a fire engine, is also included. The textiles are 100% polyester and washable at 30 ° C. The imaginative design makes playing a lot of fun. A roll -out slatted frame with 15 slats (approx. W: 70mm x H: 1.7mm) is included. The fall protection provides additional safety and has a rung look at the front, while at the back it consists of two panels. The distance from the floor to the top edge of the fall protection is 114cm, the entrance height to the top of the bed is approx. 81.5cm and the height from the top of the bed to the top of the fall protection is approx. 32cm. The headboard and footboard have a closed panel with a milled ornamentation on the outside. The panel is smooth on the inside. The ladder tower with a slide is special. For space -saving reasons, the slide runs at a 33 ° angle to the bed as shown. It can run to the right or left by mounting the parts of the fall protection in a mirrored manner. The approx. 35cm wide steps ensure safe climbing up and down. In addition, the ladder has handle holes that are great for holding onto. The space under the bed, from the floor to the lower edge of the bed, is approx. 72.5cm high and can still be used as storage space. The high -quality workmanship and very good stability characterize this bed. The post thickness is approx. 55.5 x 55.5mm. Max. Mattress height approx. 20cm. Not suitable for children under 6 years of age. The product is disassembled for easy self -assembly. The mattress, pillows and decorations are not included. FSC® certified and built according to EN 747-2: 2012+A1 (2015). Required floor space approx. W: 207.6 x H: 114 x D: 203.7cm.