Bunk bed with side conversion, higher-lying surface and bed drawer on castors. The use of high-quality materials makes the bed ideal for a child's room or guest room. The side and back panels are made of high-quality MDF with a white finish, while the bedposts are made of solid pine with a natural finish. The bed surface is approx. 90 x 200cm and includes a roll-up slatted frame with 15 slats. The item is characterized by high-quality workmanship and good stability. The bedposts measure approx. 56 x 56mm, the bedside is approx. 11cm high and the ground clearance is approx. 29cm. The distance from the floor to the upper edge of the bed is 40cm, which allows a slightly elevated lying position. An inlay depth of approx. 5cm is available for the mattress. This allows the free space under the bed to be used as storage space. The high-quality MDF base material has an easy-to-clean surface and is painted white. The material thicknesses offer solid workmanship, stability and stability. The front of the bed drawer has 2 vertical millings and 3 recessed handles. This visually loosens up the front. The drawer can be easily pulled out and pushed in thanks to the roller extension. The inner height of the bed drawer is approx. 12.6cm. The three base plates have ventilation holes on the right and left. The drawer can be used as additional storage space for blankets or bedding. The decoration and mattresses are not included. The item is delivered disassembled, with assembly instructions for easy self-assembly.