Assembly Required Vipack Children's Mid Sleeper Beds

Brown

Very sturdy bed and easy assembly. Kirsty. Burley Ringwood, GB. Thu May 20 2021

White

The mid -height bed from the Scott collection, with a slide and a bed surface of 90 x 200cm, is ideal for playing and sleeping. An adventure playground in the children's room. The item is made of solid pine and the surface is painted white. A roll -out slatted frame with 15 slats (approx. W: 70mm x H: 1.7mm) is included. The fall protection provides additional safety and has a rung look at the front, while at the back it consists of two panels. The distance from the floor to the top edge of the fall protection is 114cm, the entrance height to the top of the bed is approx. 81.5cm and the height from the top of the bed to the top of the fall protection is approx. 32cm. The headboard and footboard have a closed panel with a milled ornamentation on the outside. The panel is smooth on the inside. The ladder tower with a slide is special. For space -saving reasons, the slide runs at a 33 ° angle to the bed as shown. It can run to the right or left by mounting the parts of the fall protection in a mirrored manner. The approx. 35cm wide steps ensure safe climbing up and down. In addition, the ladder has handle holes that are great for holding onto. The space under the bed, from the floor to the lower edge of the bed, is approx. 72.5cm high and can still be used as storage space. The high -quality workmanship and very good stability characterize this bed. The post thickness is approx. 55.5 x 55.5mm. Max. Mattress height approx. 20cm. Not suitable for children under 6 years of age. The product is disassembled for easy self -assembly. The mattress, pillows and decorations are not included. FSC® certified and built according to EN 747-2: 2012+A1 (2015). Required floor space approx. W: 207.6 x H: 114 x D: 203.7cm.

Standard, Natural

With its included slide, this cabin bed is perfect for both playing and sleeping. It's made of natural-colored, solid pine wood. Playing on the slide is great fun, and both the ladder and slide can be attached on either the left or right. Playing on the slide is great fun, and both the ladder and slide can be attached on either the left or right. The included Birdy fabric curtain set has a playful, romantic style. It has a light beige background and features a floral pattern with butterflies and vines. The front curtain has an open entranceway which is covered by a flap that can easily be rolled up. They are made of 100% cotton and are washable at 30ºC. The space beneath the bed is the perfect play area or can be used as a practical storage space. The distance from the floor to the bottom of the bed is approximately 70cm. A slatted frame is included. The ladder can be attached on either the left or right side. The bed features all-round side rails and wide ladder steps for safety when climbing up and down, and is both well made and sturdy. The posts are approximately 6.5cm x 6.5cm thick. The bed is European single size. It requires approximately 210cm W x 218cm D of floor space. It's 114cm tall. The product requires self-assembly, using the simple assembly instructions included. FSC® certified and manufactured in accordance with EN 747-2:2012+A1(2015).

Bought it for our four years old and she absolutely loves it! Easy to put together and lots of room for her to play underneath. We also added some fairy lights under it!. Anonymous. Shifnal, GB. Wed Jun 03 2020

The mid -height bed from the Scott collection, with a slide and a bed surface of 90 x 200cm, is ideal for playing and sleeping. An adventure playground in the children's room. The item is made of solid pine and the surface is painted white. The textile set in the design "Space Shuttle", consisting of the curtain with the great depiction of a fire engine, is also included. The textiles are 100% polyester and washable at 30 ° C. The imaginative design makes playing a lot of fun. A roll -out slatted frame with 15 slats (approx. W: 70mm x H: 1.7mm) is included. The fall protection provides additional safety and has a rung look at the front, while at the back it consists of two panels. The distance from the floor to the top edge of the fall protection is 114cm, the entrance height to the top of the bed is approx. 81.5cm and the height from the top of the bed to the top of the fall protection is approx. 32cm. The headboard and footboard have a closed panel with a milled ornamentation on the outside. The panel is smooth on the inside. The ladder tower with a slide is special. For space -saving reasons, the slide runs at a 33 ° angle to the bed as shown. It can run to the right or left by mounting the parts of the fall protection in a mirrored manner. The approx. 35cm wide steps ensure safe climbing up and down. In addition, the ladder has handle holes that are great for holding onto. The space under the bed, from the floor to the lower edge of the bed, is approx. 72.5cm high and can still be used as storage space. The high -quality workmanship and very good stability characterize this bed. The post thickness is approx. 55.5 x 55.5mm. Max. Mattress height approx. 20cm. Not suitable for children under 6 years of age. The product is disassembled for easy self -assembly. The mattress, pillows and decorations are not included. FSC® certified and built according to EN 747-2: 2012+A1 (2015). Required floor space approx. W: 207.6 x H: 114 x D: 203.7cm.

Beige

This mid sleeper bed is made of solid pine wood and features a slide, making it the perfect place for playing and sleeping. The fabric set is included in the delivery and consists of a curtain and three pockets featuring a princess design. The light tone of the fabric harmonises wonderfully with the playful patterns of the princess theme. The front curtain has an open entranceway which is covered by a flap that can easily be rolled up. The fabric in this set is made of 100% cotton and can be washed at 30°C. The pockets feature different designs and can be attached to the safety rail using the included straps. The space underneath the bed is the perfect play area or can be used as a practical storage space. The ladder and slide can be installed on either the left or right side of the bed. This bed is characterised by its high-quality workmanship, stable construction, surrounding safety rails and wide ladder rungs for safely climbing up and down.

Roza. Wermelskirchen, DE. Mon Mar 09 2020

The mid -height bed from the Scott collection, with a bed surface of 90 x 200cm and a sloping ladder, is ideal for playing and sleeping. An adventure playground in the children's room. The item is made of solid pine and the surface is painted white. A roll -out slatted frame with 15 slats (approx. W: 70mm x H: 1.7mm) is included. The fall protection provides additional safety and has a rung look at the front, while at the back it consists of two panels. The distance from the floor to the top edge of the fall protection is approx. 114cm, the entrance height to the top edge of the bed is approx. 81.5cm and the height from the top of the bed to the top edge of the fall protection is approx. 32cm. The headboard and footboard have a closed panel with a milled ornamentation on the outside. The panel is smooth on the inside. The ladder is slanted and can be installed on the right or left. It has approx. 35cm wide steps that allow you to safely climb up and down. In addition, the ladder has handle holes that are great for holding onto. The space under the bed, from the floor to the lower edge of the bed, is approx. 72.5cm high and can still be used as storage space. The high -quality workmanship and very good stability characterize this bed. The post thickness is approx. 55.5 x 55.5mm. Max. Mattress height approx. 20cm. Not suitable for children under 6 years of age. The product is disassembled for easy self -assembly. The mattress, pillows and decorations are not included. FSC® certified and built according to EN 747-2: 2012+A1 (2015). The bed itself is approx. 207.6cm W x 97.6cm D. The ladder requires a depth of approx. 37.1cm. Required floor space approx. W: 207.6cm x H: 114.7cm x D: 134.7cm.

218 x 210 cm, White

Unexpectedly durable. It is being used by my second daughter now!. Li Wai. New Malden, GB. Tue Nov 25 2025

Pink

A great loft bed with a slide for playing and sleeping. Made of solid pine with a gray finish. The slide brings a lot of fun to play, an adventure playground for every child's room. The fabric set in the "Bella" design, consisting of the curtain, is included. The textiles are 100% polyester and washable at 30 ° C. A roll -up slatted frame is also included. The ladder and slide can be mounted on the left or right. The surrounding fall protection, the wide steps for safe climbing up and down, as well as the high-quality workmanship and good stability, characterize this article. The space under the bed can be used for playing, or for storage. The height from the floor to the lower edge of the bed is approximately 70cm. Post thickness: Approx. 6.4cm x 6.4cm. The bed surface is 90 x 200cm. Required floor space approx. 210 x 218cm. Height 114cm. The item is disassembled with assembly instructions for easy self -assembly. Height from the upper edge of the bed to the upper edge of the fall protection: Approx. 36cm. Max. Mattress height approx. 20cm. Not suitable for children under 6 years of age. The decoration and bag are not included. FSC® certified and built according to EN 747-2: 2012+A1 (2015).

Premium (Curtain and Tunnel)

This loft bed with a slide invites you to play and sleep. It is made of solid pine and painted in a grey finish. The slide brings a lot of fun while playing and the ladder and slide can be mounted on the left or right. The textile set in the design "spring", consisting of the curtain and 3 bags, is included. The basic colour is a light shade of pink, on which the floral pattern stands out in a great colour. The front curtain has an opening that can be rolled up. The textiles are 100% cotton, washable at 30°. The pockets each have different motifs and are attached to the crash guard with the tabs. The space under the lying surface is great for playing or can be used as storage space. A roll-up slatted frame is included in the delivery. The ladder can be mounted on the left or right side. The all-around fall protection, the wide steps for safe climbing up and down, as well as the high-quality workmanship and good stability, distinguish this article. The article is disassembled with assembly instructions for easy self-assembly. Height from the top edge of the bedside to the top edge of the fall protection approx. 36 cm.

Premium, Beige

This mid-sleeper bed is made of solid pine wood and features a slide, making it the perfect place for playing and sleeping. The fabric set is included in the delivery and consists of a tunnel and a curtain featuring a design. The dark blue tone of the fabric harmonizes wonderfully with the playful patterns that make up the space theme. The front curtain has an open entranceway which is covered by a flap that can easily be rolled up. The fabric in this set is made of 100% cotton and can be washed at 30°C. The space underneath the bed is the perfect play area or can be used as a practical storage space. The ladder and slide can be installed on either the left or right side of the bed. This bed is characterized by its high-quality workmanship, stable construction, surrounding safety rails, and wide ladder rungs for safely climbing up and down.

We love it! It was a little difficult to put together. But worth it.. Venetia. Edinburgh, GB. Sat Dec 14 2019

The mid -height bed from the Scott collection, with a slide and a bed surface of 90 x 200cm, is ideal for playing and sleeping. An adventure playground in the children's room. The item is made of solid pine and the surface is painted white. The textile set in the design "Fire Rescue", consisting of the curtain with the great depiction of a fire engine, is also included. The textiles are 100% polyester and washable at 30 ° C. The imaginative design makes playing a lot of fun. A roll -out slatted frame with 15 slats (approx. W: 70mm x H: 1.7mm) is included. The fall protection provides additional safety and has a rung look at the front, while at the back it consists of two panels. The distance from the floor to the top edge of the fall protection is 114cm, the entrance height to the top of the bed is approx. 81.5cm and the height from the top of the bed to the top of the fall protection is approx. 32cm. The headboard and footboard have a closed panel with a milled ornamentation on the outside. The panel is smooth on the inside. The ladder tower with a slide is special. For space -saving reasons, the slide runs at a 33 ° angle to the bed as shown. It can run to the right or left by mounting the parts of the fall protection in a mirrored manner. The approx. 35cm wide steps ensure safe climbing up and down. In addition, the ladder has handle holes that are great for holding onto. The space under the bed, from the floor to the lower edge of the bed, is approx. 72.5cm high and can still be used as storage space. The high -quality workmanship and very good stability characterize this bed. The post thickness is approx. 55.5 x 55.5mm. Max. Mattress height approx. 20cm. Not suitable for children under 6 years of age. The product is disassembled for easy self -assembly. The mattress, pillows and decorations are not included. FSC® certified and built according to EN 747-2: 2012+A1 (2015). Required floor space approx. W: 207.6 x H: 114 x D: 203.7cm.

Oak

The loft bed with slide from the series Pino is an ideal bed for sleeping, playing and dreaming. The lying surface is 90 x 200 cm. It is made of solid pine and has a post thickness of 64 x 64 mm. The finish is lacquered. It is fully equipped, with a roll-up slatted frame, the ladder and a slide. The textile set in the design "Dino", consisting of the curtain with the great representation of a fire engine, is also included. The textiles are 100% polyester, washable at 30°. The slide brings a lot of fun while playing, it is an adventure playground for every child's room. The ladder (approx. 35 cm wide) and the slide (approx. 39 cm wide) can be mounted on the left or right. The all-round fall protection, the wide steps for safe climbing up and down, as well as the high-quality workmanship and good stability, distinguish this article. The height from the upper edge of the bed side to the upper edge of the fall protection is approx. 36 cm, with a max. mattress height of approx. 20 cm. The space under the bed can be used for playing or as storage space. The height from the floor to the lower edge of the bed side is approx. 72 cm. The distance between ladder and slide is approx. 118 cm. As floor space in the room you need approx. W: 210 x D: 218 cm. The height is approx. 114 cm. The bed is not suitable for children under 6 years. The decoration and the mattress are not included. The article is disassembled with assembly instructions for easy self-assembly. FSC® certified and built according to EN 747-2:2012+A1(2015).

Oak

The loft bed with slide from the series Pino is an ideal bed for sleeping, playing and dreaming. The lying surface is 90 x 200 cm. It is made of solid pine and has a post thickness of 64 x 64 mm. The finish is lacquered. It is fully equipped, with a roll-up slatted frame, the ladder and a slide. The textile set in the design "Pet Shop", consisting of the curtain with the great representation of a fire engine, is also included. The textiles are 100% polyester, washable at 30°. The slide brings a lot of fun while playing, it is an adventure playground for every child's room. The ladder (approx. 35 cm wide) and the slide (approx. 39 cm wide) can be mounted on the left or right. The all-round fall protection, the wide steps for safe climbing up and down, as well as the high-quality workmanship and good stability, distinguish this article. The height from the upper edge of the bed side to the upper edge of the fall protection is approx. 36 cm, with a max. mattress height of approx. 20 cm. The space under the bed can be used for playing or as storage space. The height from the floor to the lower edge of the bed side is approx. 72 cm. The distance between ladder and slide is approx. 118 cm. As floor space in the room you need approx. W: 210 x D: 218 cm. The height is approx. 114 cm. The bed is not suitable for children under 6 years. The decoration and the mattress are not included. The article is disassembled with assembly instructions for easy self-assembly. FSC® certified and built according to EN 747-2:2012+A1(2015).

Das Bett ist sehr stabil und wurde sofort begeistert genutzt. Die Rutsche ist ein Highlight und die Höhle unten sehr praktisch zum Verstecken oder Spielsachen verstauen. Es ist leicht von einer Person aufzubauen.. Anonymous. Velburg, DE. Sat Dec 16 2023

The mid -height bed from the Scott collection, with a slide and a bed surface of 90 x 200cm, is ideal for playing and sleeping. An adventure playground in the children's room. The item is made of solid pine and the surface is painted white. The "Caribian Pirate" design, consisting of a curtain with a great depiction of a fire engine, is also included. The textiles are 100% polyester and washable at 30 ° C. The imaginative design makes playing a lot of fun. A roll -out slatted frame with 15 slats (approx. W: 70mm x H: 1.7mm) is included. The fall protection provides additional safety and has a rung look at the front, while at the back it consists of two panels. The distance from the floor to the top edge of the fall protection is 114cm, the entrance height to the top of the bed is approx. 81.5cm and the height from the top of the bed to the top of the fall protection is approx. 32cm. The headboard and footboard have a closed panel with a milled ornamentation on the outside. The panel is smooth on the inside. The ladder tower with a slide is special. For space -saving reasons, the slide runs at a 33 ° angle to the bed as shown. It can run to the right or left by mounting the parts of the fall protection in a mirrored manner. The approx. 35cm wide steps ensure safe climbing up and down. In addition, the ladder has handle holes that are great for holding onto. The space under the bed, from the floor to the lower edge of the bed, is approx. 72.5cm high and can still be used as storage space. The high -quality workmanship and very good stability characterize this bed. The post thickness is approx. 55.5 x 55.5mm. Max. Mattress height approx. 20cm. Not suitable for children under 6 years of age. The product is disassembled for easy self -assembly. The mattress, pillows and decorations are not included. FSC® certified and built according to EN 747-2: 2012+A1 (2015). Required floor space approx. W: 207.6 x H: 114 x D: 203.7cm.

Grey

The loft bed with slide from the series Pino is an ideal bed for sleeping, playing and dreaming. The lying surface is 90 x 200 cm. It is made of solid pine and has a post thickness of 64 x 64 mm. The finish is lacquered. It is fully equipped with a roll-up slatted frame, ladder and slide. The textile set in the design "Police", consisting of the curtain with the great representation of a fire engine, is also included. The textiles are 100% polyester, washable at 30°. The slide brings a lot of fun while playing, it is an adventure playground for every child's room. The ladder (approx. 35 cm wide) and the slide (approx. 39 cm wide) can be mounted on the left or right. The all-round fall protection, the wide steps for safe climbing up and down, as well as the high-quality workmanship and good stability, distinguish this article. The height from the upper edge of the bed side to the upper edge of the fall protection is approx. 36 cm, with a max. mattress height of approx. 20 cm. The space under the bed can be used for playing or as storage space. The height from the floor to the lower edge of the bed side is approx. 72 cm. The distance between ladder and slide is approx. 118 cm. As floor space in the room you need approx. W: 210 x D: 218 cm. The height is approx. 114 cm. The bed is not suitable for children under 6 years. The decoration and the mattress are not included. The article is disassembled with assembly instructions for easy self-assembly. FSC® certified and built according to EN 747-2:2012+A1(2015).

The mid -height bed, with a lying surface of 90 x 200cm and an inclined ladder, is ideal for playing and sleeping. A solid roll -up slatted frame with 15 slats is included. An adventure playground in the children's room. The base material is solid beech, painted white. The high -quality selection of the material is reflected in the use of wood and the workmanship. The black screws are visible and set an optical accent. The fall protection provides additional safety and has a finely crafted rungs look. The round bars have a thickness of approx. 16mm. The distance from the floor to the top edge of the fall protection is approx. 114cm, the entrance height to the top edge of the bed is approx. 81.5cm and the height from the top of the bed side to the top edge of the fall protection is approx. 32cm. The ladder with 3 steps (distance approx. 22.9cm) is inclined and can be installed on the right or left. It has approx. 35cm wide steps which allow safe climbing up and down. The space under the bed surface is approx. 72.5cm high from the floor to the lower edge of the bed and can still be used as storage space. The high -quality workmanship and very good stability characterize this bed. The post thickness is approx. 55 x 55mm. Max. Mattress height approx. 20cm. Not suitable for children under 6 years of age. The product is disassembled for easy self -assembly. The mattress, pillows and decorations are not included. FSC® certified and built according to EN 747-2: 2012+A1 (2015). The bed itself is approx. 207.5cm W x 97.5cm D. The ladder requires a depth of approx. 38cm. Required floor space halfway. Bed approx. W: 207.5cm x H: 114cm x D: 135.5cm.

The mid -height bed from the Scott collection, with a bed surface of 90 x 200cm and a sloping ladder, is ideal for playing and sleeping. An adventure playground in the children's room. The item is made of solid pine and the surface is painted white. The textile set in the design "Fire Rescue", consisting of the curtain with the great depiction of a fire engine, is also included. The textiles are 100% polyester and washable at 30 ° C. The imaginative design makes playing a lot of fun. A roll -out slatted frame with 15 slats (approx. W: 70mm x H: 1.7mm) is included. The fall protection provides additional safety and has a rung look at the front, while at the back it consists of two panels. The distance from the floor to the top edge of the fall protection is approx. 114cm, the entrance height to the top edge of the bed is approx. 81.5cm and the height from the top of the bed to the top edge of the fall protection is approx. 32cm. The headboard and footboard have a closed panel with a milled ornamentation on the outside. The panel is smooth on the inside. The ladder is slanted and can be installed on the right or left. It has approx. 35cm wide steps that allow you to safely climb up and down. In addition, the ladder has handle holes that are great for holding onto. The space under the bed, from the floor to the lower edge of the bed, is approx. 72.5cm high and can still be used as storage space. The high -quality workmanship and very good stability characterize this bed. The post thickness is approx. 55.5 x 55.5mm. Max. Mattress height approx. 20cm. Not suitable for children under 6 years of age. The product is disassembled for easy self -assembly. The mattress, pillows and decorations are not included. FSC® certified and built according to EN 747-2: 2012+A1 (2015). The bed itself is approx. 207.6cm W x 97.6cm D. The ladder requires a depth of approx. 37.1cm. Required floor space is approximately 207.6cm W x 114.7cm H x 134.7cm D.

Lieferung hat ewig gedauert aber das Warten hat sich gelohnt. Tolles Bett, sehr stabil.. Laura. Welzheim, DE. Fri May 24 2024

The mid -height bed from the Scott collection, with a bed surface of 90 x 200cm and a sloping ladder, is ideal for playing and sleeping. An adventure playground in the children's room. The item is made of solid pine and the surface is painted white. The textile set in the design "Pet Shop", consisting of the curtain with the great depiction of a fire engine, is also included. The textiles are 100% polyester and washable at 30 ° C. The imaginative design makes playing a lot of fun. A roll -out slatted frame with 15 slats (approx. W: 70mm x H: 1.7mm) is included. The fall protection provides additional safety and has a rung look at the front, while at the back it consists of two panels. The distance from the floor to the top edge of the fall protection is approx. 114cm, the entrance height to the top edge of the bed is approx. 81.5cm and the height from the top of the bed to the top edge of the fall protection is approx. 32cm. The headboard and footboard have a closed panel with a milled ornamentation on the outside. The panel is smooth on the inside. The ladder is slanted and can be installed on the right or left. It has approx. 35cm wide steps that allow you to safely climb up and down. In addition, the ladder has handle holes that are great for holding onto. The space under the bed, from the floor to the lower edge of the bed, is approx. 72.5cm high and can still be used as storage space. The high -quality workmanship and very good stability characterize this bed. The post thickness is approx. 55.5 x 55.5mm. Max. Mattress height approx. 20cm. Not suitable for children under 6 years of age. The product is disassembled for easy self -assembly. The mattress, pillows and decorations are not included. FSC® certified and built according to EN 747-2: 2012+A1 (2015). The bed itself is approx. 207.6cm W x 97.6cm D. The ladder requires a depth of approx. 37.1cm. Required floor space approx. W: 207.6cm x H: 114.7cm x D: 134.7cm.

Oak

The loft bed with slide from the series Pino is an ideal bed for sleeping, playing and dreaming. The lying surface is 90 x 200 cm. It is made of solid pine and has a post thickness of 64 x 64 mm. The finish is lacquered. It is fully equipped, with a roll-up slatted frame, the ladder and a slide. The textile set in the design "Space Shuttle", consisting of the curtain with the great representation of a fire engine, is also included. The textiles are 100% polyester, washable at 30°. The slide brings a lot of fun while playing, it is an adventure playground for every child's room. The ladder (approx. 35 cm wide) and the slide (approx. 39 cm wide) can be mounted on the left or right. The all-round fall protection, the wide steps for safe climbing up and down, as well as the high-quality workmanship and good stability, distinguish this article. The height from the upper edge of the bed side to the upper edge of the fall protection is approx. 36 cm, with a max. mattress height of approx. 20 cm. The space under the bed can be used for playing or as storage space. The height from the floor to the lower edge of the bed side is approx. 72 cm. The distance between ladder and slide is approx. 118 cm. As floor space in the room you need approx. W: 210 x D: 218 cm. The height is approx. 114 cm. The bed is not suitable for children under 6 years. The decoration and the mattress are not included. The article is disassembled with assembly instructions for easy self-assembly. FSC® certified and built according to EN 747-2:2012+A1(2015).

The mid -height bed from the Scott collection, with a slide and a bed surface of 90 x 200cm, is ideal for playing and sleeping. An adventure playground in the children's room. The item is made of solid pine and the surface is painted white. The textile set in the design "Princess Sophie", consisting of the curtain with the great depiction of a fire engine, is also included. The textiles are 100% polyester and washable at 30 ° C. The imaginative design makes playing a lot of fun. A roll -out slatted frame with 15 slats (approx. W: 70mm x H: 1.7mm) is included. The fall protection provides additional safety and has a rung look at the front, while at the back it consists of two panels. The distance from the floor to the top edge of the fall protection is 114cm, the entrance height to the top of the bed is approx. 81.5cm and the height from the top of the bed to the top of the fall protection is approx. 32cm. The headboard and footboard have a closed panel with a milled ornamentation on the outside. The panel is smooth on the inside. The ladder tower with a slide is special. For space -saving reasons, the slide runs at a 33 ° angle to the bed as shown. It can run to the right or left by mounting the parts of the fall protection in a mirrored manner. The approx. 35cm wide steps ensure safe climbing up and down. In addition, the ladder has handle holes that are great for holding onto. The space under the bed, from the floor to the lower edge of the bed, is approx. 72.5cm high and can still be used as storage space. The high -quality workmanship and very good stability characterize this bed. The post thickness is approx. 55.5 x 55.5mm. Max. Mattress height approx. 20cm. Not suitable for children under 6 years of age. The product is disassembled for easy self -assembly. The mattress, pillows and decorations are not included. FSC® certified and built according to EN 747-2: 2012+A1 (2015). Required floor space approx. W: 207.6 x H: 114 x D: 203.7cm.

Premium (Curtain and Pockets)

This loft bed with a slide invites you to play and sleep. It is made of solid pine and painted in the grey finish. The slide brings a lot of fun while playing and the ladder and slide can be mounted on the left or right. The textile set in the design "Astro", consisting of the curtain and 3 bags, is included. The basic colour is a blue colour, on which the pattern on the theme of space in great colour contrast. The front curtain has an opening that can be rolled up. The textiles are 100% cotton, washable at 30°. The pockets each have different motifs and are attached to the crash guard with the tabs. The space under the lying surface is great for playing or can be used as storage space. A roll-up slatted frame is included in the delivery. The ladder can be mounted on the left or right side. The all-round fall protection, the wide steps for safe climbing up and down, as well as the high-quality workmanship and good stability, distinguish this article. The article is disassembled with assembly instructions for easy self-assembly. Height from the top edge of the bedside to the top edge of the fall protection approx. 36 cm.

The mid -height bed from the Scott collection, with a slide and a bed surface of 90 x 200cm, is ideal for playing and sleeping. An adventure playground in the children's room. The item is made of solid pine and the surface is painted white. The textile set in the design "Pet Shop", consisting of the curtain with the great depiction of a fire engine, is also included. The textiles are 100% polyester and washable at 30 ° C. The imaginative design makes playing a lot of fun. A roll -out slatted frame with 15 slats (approx. W: 70mm x H: 1.7mm) is included. The fall protection provides additional safety and has a rung look at the front, while at the back it consists of two panels. The distance from the floor to the top edge of the fall protection is 114cm, the entrance height to the top of the bed is approx. 81.5cm and the height from the top of the bed to the top of the fall protection is approx. 32cm. The headboard and footboard have a closed panel with a milled ornamentation on the outside. The panel is smooth on the inside. The ladder tower with a slide is special. For space -saving reasons, the slide runs at a 33 ° angle to the bed as shown. It can run to the right or left by mounting the parts of the fall protection in a mirrored manner. The approx. 35cm wide steps ensure safe climbing up and down. In addition, the ladder has handle holes that are great for holding onto. The space under the bed, from the floor to the lower edge of the bed, is approx. 72.5cm high and can still be used as storage space. The high -quality workmanship and very good stability characterize this bed. The post thickness is approx. 55.5 x 55.5mm. Max. Mattress height approx. 20cm. Not suitable for children under 6 years of age. The product is disassembled for easy self -assembly. The mattress, pillows and decorations are not included. FSC® certified and built according to EN 747-2: 2012+A1 (2015). Required floor space approx. W: 207.6 x H: 114 x D: 203.7cm.

Oak

The loft bed with slide from the series Pino is an ideal bed for sleeping, playing and dreaming. The lying surface is 90 x 200 cm. It is made of solid pine and has a post thickness of 64 x 64 mm. The finish is lacquered. It is fully equipped with a roll-up slatted frame, the ladder and a slide. The textile set in the design "FIRE RESCUE", consisting of the curtain with the great representation of a fire engine, is also included. The textiles are 100% polyester, washable at 30°. The slide brings a lot of fun while playing, it is an adventure playground for every child's room. The ladder (approx. 35 cm wide) and the slide (approx. 39 cm wide) can be mounted on the left or right. The all-round fall protection, the wide steps for safe climbing up and down, as well as the high-quality workmanship and good stability, distinguish this article. The height from the upper edge of the bed side to the upper edge of the fall protection is approx. 36 cm, with a max. mattress height of approx. 20 cm. The space under the bed can be used for playing or as storage space. The height from the floor to the lower edge of the bed side is approx. 72 cm. The distance between ladder and slide is approx. 118 cm. As floor space in the room you need approx. W: 210 x D: 218 cm. The height is approx. 114 cm. The bed is not suitable for children under 6 years. The decoration and the mattress are not included. The article is disassembled with assembly instructions for easy self-assembly. FSC® certified and built according to EN 747-2:2012+A1(2015).

Standard

This loft bed with a slide invites you to play and sleep. It is made of solid pine and painted in a grey finish. The slide brings a lot of fun while playing and the ladder and slide can be mounted on the left or right. The textile set in the design "Birdy" with its playful romantic look, consists of a curtain and 3 bags, is included. The basic colour is white, on which the floral pattern with butterflies and tendrils stands out as a great colour. The pockets have a basic colour pink. The front curtain has a passage that can be rolled up. The textiles are 100% cotton, washable at 30 °. The pockets each have different motifs and are attached to the crash guard with the tabs. The space under the lying surface is great for playing or can be used as storage space. A roll-up slatted frame is included in the delivery. The ladder can be mounted on the left or right side. The all-round fall protection, the wide steps for safe climbing up and down, as well as the high-quality workmanship and good stability, distinguish this article. The article is disassembled with assembly instructions for easy self-assembly. Height from the top edge of the bedside to the top edge of the fall protection approx. 36 cm.

Natural

This mid sleeper bed is made of solid pine wood and features a slide, making it the perfect place for playing and sleeping. The fabric set is included in the delivery and consists of a curtain and three pockets featuring an 'Astro' design. The dark blue tone of the fabric harmonises wonderfully with the playful patterns that make up the space theme. The front curtain has an open entranceway which is covered by a flap that can easily be rolled up. The fabric in this set is made of 100% cotton and can be washed at 30°C. The pockets feature different designs and can be attached to the safety rail using the included straps. The space underneath the bed is the perfect play area or can be used as practical storage space. The ladder and slide can be installed on either the left or right side of the bed. This bed is characterised by its high-quality workmanship, stable construction, surrounding safety rails and wide ladder rungs for safely climbing up and down.

Great buy. Perfect for sleep and play, with its own little hideaway. A big hit.. Anonymous. Sat Feb 01 2020

A great loft bed with a slide for playing and sleeping. Made of solid pine with a gray finish. The slide is a lot of fun to play with. A roll -up slatted frame is included. The ladder and slide can be mounted on the left or right. The surrounding fall protection, the wide steps for safe climbing up and down, as well as the high-quality workmanship and good stability, characterize this article. The space under the bed can be used for playing, or for storage. The height from the floor to the lower edge of the bed is approximately 70cm. Post thickness approx. 6.4 x 6.4cm, the bed sides and the fall protection are 2.0cm thick. The bed surface is 90 x 200cm. Required floor space approx. 210 x 218cm. Height 114cm. The item is disassembled with assembly instructions for easy self -assembly. Height from the upper edge of the bed to the upper edge of the fall protection: Approx. 36cm. Max. Mattress height approx. 20cm. Not suitable for children under 6 years of age. The decoration is not included. The decoration is not included. FSC® certified and built according to EN 747-2: 2012+A1 (2015).

The mid -height bed from the Scott collection, with a bed surface of 90 x 200cm and a sloping ladder, is ideal for playing and sleeping. An adventure playground in the children's room. The item is made of solid pine and the surface is painted white. The textile set in the design "Princess Sophie", consisting of the curtain with the great depiction of a fire engine, is also included. The textiles are 100% polyester and washable at 30 ° C. The imaginative design makes playing a lot of fun. A roll -out slatted frame with 15 slats (approx. W: 70mm x H: 1.7mm) is included. The fall protection provides additional safety and has a rung look at the front, while at the back it consists of two panels. The distance from the floor to the top edge of the fall protection is approx. 114cm, the entrance height to the top edge of the bed is approx. 81.5cm and the height from the top of the bed to the top edge of the fall protection is approx. 32cm. The headboard and footboard have a closed panel with a milled ornamentation on the outside. The panel is smooth on the inside. The ladder is slanted and can be installed on the right or left. It has approx. 35cm wide steps that allow you to safely climb up and down. In addition, the ladder has handle holes that are great for holding onto. The space under the bed, from the floor to the lower edge of the bed, is approx. 72.5cm high and can still be used as storage space. The high -quality workmanship and very good stability characterize this bed. The post thickness is approx. 55.5 x 55.5mm. Max. Mattress height approx. 20cm. Not suitable for children under 6 years of age. The product is disassembled for easy self -assembly. The mattress, pillows and decorations are not included. FSC® certified and built according to EN 747-2: 2012+A1 (2015). The bed itself is approx. 207.6cm W x 97.6cm D. The ladder requires a depth of approx. 37.1cm. Required floor space approx. W: 207.6cm x H: 114.7cm x D: 134.7cm.

The mid -height bed from the Scott collection, with a slide and a bed surface of 90 x 200cm, is ideal for playing and sleeping. An adventure playground in the children's room. The item is made of solid pine and the surface is painted white. The textile set in the "Police" design, consisting of the curtain with the great depiction of a fire engine, is also included. The textiles are 100% polyester and washable at 30 ° C. The imaginative design makes playing a lot of fun. A roll -out slatted frame with 15 slats (approx. W: 70mm x H: 1.7mm) is included. The fall protection provides additional safety and has a rung look at the front, while at the back it consists of two panels. The distance from the floor to the top edge of the fall protection is 114cm, the entrance height to the top of the bed is approx. 81.5cm and the height from the top of the bed to the top of the fall protection is approx. 32cm. The headboard and footboard have a closed panel with a milled ornamentation on the outside. The panel is smooth on the inside. The ladder tower with a slide is special. For space -saving reasons, the slide runs at a 33 ° angle to the bed as shown. It can run to the right or left by mounting the parts of the fall protection in a mirrored manner. The approx. 35cm wide steps ensure safe climbing up and down. In addition, the ladder has handle holes that are great for holding onto. The space under the bed, from the floor to the lower edge of the bed, is approx. 72.5cm high and can still be used as storage space. The high -quality workmanship and very good stability characterize this bed. The post thickness is approx. 55.5 x 55.5mm. Max. Mattress height approx. 20cm. Not suitable for children under 6 years of age. The product is disassembled for easy self -assembly. The mattress, pillows and decorations are not included. FSC® certified and built according to EN 747-2: 2012+A1 (2015). Required floor space approx. W: 207.6 x H: 114 x D: 203.7cm.

A great loft bed with a slide for playing and sleeping. Made of solid pine with a gray finish. The slide brings a lot of fun to play, an adventure playground for every child's room. The textile set in the design "circus", consisting of the curtain, with a great representation of a circus tent and belongs to the scope of delivery. The textiles are 100% polyester and washable at 30 ° C. A roll -up slatted frame is also included. The ladder and slide can be mounted on the left or right. The surrounding fall protection, the wide steps for safe climbing up and down, as well as the high-quality workmanship and good stability, characterize this article. The space under the bed can be used for playing, or for storage. The height from the floor to the lower edge of the bed is approximately 70cm. Post thickness: Approx. 6.4cm x 6.4cm. The bed surface is 90 x 200cm. Required floor space approx. 210 x 218cm. Height 114cm. The item is disassembled with assembly instructions for easy self -assembly. Height from the upper edge of the bed to the upper edge of the fall protection: Approx. 36cm. Max. Mattress height approx. 20cm. Not suitable for children under 6 years of age. The decoration is not included. FSC® certified and built according to EN 747-2: 2012+A1 (2015).

The mid -height bed from the Scott collection, with a bed surface of 90 x 200cm and a sloping ladder, is ideal for playing and sleeping. An adventure playground in the children's room. The item is made of solid pine and the surface is painted white. The textile set in the "Police" design, consisting of the curtain with the great depiction of a fire engine, is also included. The textiles are 100% polyester and washable at 30 ° C. The imaginative design makes playing a lot of fun. A roll -out slatted frame with 15 slats (approx. W: 70mm x H: 1.7mm) is included. The fall protection provides additional safety and has a rung look at the front, while at the back it consists of two panels. The distance from the floor to the top edge of the fall protection is approx. 114cm, the entrance height to the top edge of the bed is approx. 81.5cm and the height from the top of the bed to the top edge of the fall protection is approx. 32cm. The headboard and footboard have a closed panel with a milled ornamentation on the outside. The panel is smooth on the inside. The ladder is slanted and can be installed on the right or left. It has approx. 35cm wide steps that allow you to safely climb up and down. In addition, the ladder has handle holes that are great for holding onto. The space under the bed, from the floor to the lower edge of the bed, is approx. 72.5cm high and can still be used as storage space. The high -quality workmanship and very good stability characterize this bed. The post thickness is approx. 55.5 x 55.5mm. Max. Mattress height approx. 20cm. Not suitable for children under 6 years of age. The product is disassembled for easy self -assembly. The mattress, pillows and decorations are not included. FSC® certified and built according to EN 747-2: 2012+A1 (2015). The bed itself is approx. 207.6cm W x 97.6cm D. The ladder requires a depth of approx. 37.1cm. Required floor space approx. W: 207.6cm x H: 114.7cm x D: 134.7cm.

White

The loft bed with slide from the series Pino is an ideal bed for sleeping, playing and dreaming. The lying surface is 90 x 200 cm. It is made of solid pine and has a post thickness of 64 x 64 mm. The finish is lacquered. It is fully equipped with a roll-up slatted frame, ladder and slide. The textile set in the design "Princess Sophie", consisting of the curtain with the great representation of a fire engine, is also included. The textiles are 100% polyester, washable at 30°. The slide brings a lot of fun while playing, it is an adventure playground for every child's room. The ladder (approx. 35 cm wide) and the slide (approx. 39 cm wide) can be mounted on the left or right. The all-round fall protection, the wide steps for safe climbing up and down, as well as the high-quality workmanship and good stability, distinguish this article. The height from the upper edge of the bed side to the upper edge of the fall protection is approx. 36 cm, with a max. mattress height of approx. 20 cm. The space under the bed can be used for playing or as storage space. The height from the floor to the lower edge of the bed side is approx. 72 cm. The distance between ladder and slide is approx. 118 cm. As floor space in the room you need approx. W: 210 x D: 218 cm. The height is approx. 114 cm. The bed is not suitable for children under 6 years. The decoration and the mattress are not included. The article is disassembled with assembly instructions for easy self-assembly. FSC® certified and built according to EN 747-2:2012+A1(2015).

Standard

This loft bed with a slide invites you to play and sleep. It is made of solid pine and painted in the grey finish. The slide brings a lot of fun while playing and the ladder and slide can be mounted on the left or right. The textile set in the design "princes", consisting of the curtain and 3 bags, is included. The basic colour is white, on which the playful pattern on the theme of princess contrasts beautifully. The front curtain has an opening that can be rolled up. The textiles are 100% cotton, washable at 30°. The pockets each have different motifs and are attached to the crash guard with the tabs. The space under the lying surface is great for playing or can be used as storage space. A roll-up slatted frame is included in the delivery. The ladder can be mounted on the left or right side. The all-round fall protection, the wide steps for safe climbing up and down, as well as the high-quality workmanship and good stability, distinguish this article. The article is disassembled with assembly instructions for easy self-assembly. Height from the top edge of the bedside to the top edge of the fall protection approx. 36 cm.

The mid -height bed from the Scott collection, with a bed surface of 90 x 200cm and a sloping ladder, is ideal for playing and sleeping. An adventure playground in the children's room. The item is made of solid pine and the surface is painted white. The "Caribian Pirate" design, consisting of a curtain with a great depiction of a fire engine, is also included. The textiles are 100% polyester and washable at 30 ° C. The imaginative design makes playing a lot of fun. A roll -out slatted frame with 15 slats (approx. W: 70mm x H: 1.7mm) is included. The fall protection provides additional safety and has a rung look at the front, while at the back it consists of two panels. The distance from the floor to the top edge of the fall protection is approx. 114cm, the entrance height to the top edge of the bed is approx. 81.5cm and the height from the top of the bed to the top edge of the fall protection is approx. 32cm. The headboard and footboard have a closed panel with a milled ornamentation on the outside. The panel is smooth on the inside. The ladder is slanted and can be installed on the right or left. It has approx. 35cm wide steps that allow you to safely climb up and down. In addition, the ladder has handle holes that are great for holding onto. The space under the bed, from the floor to the lower edge of the bed, is approx. 72.5cm high and can still be used as storage space. The high -quality workmanship and very good stability characterize this bed. The post thickness is approx. 55.5 x 55.5mm. Max. Mattress height approx. 20cm. Not suitable for children under 6 years of age. The product is disassembled for easy self -assembly. The mattress, pillows and decorations are not included. FSC® certified and built according to EN 747-2: 2012+A1 (2015). The bed itself is approx. 207.6cm W x 97.6cm D. The ladder requires a depth of approx. 37.1cm. Required floor space is approximately 207.6cm W x 114.7cm H x 134.7cm D.

The mid -height bed from the Scott collection, with a bed surface of 90 x 200cm and a sloping ladder, is ideal for playing and sleeping. An adventure playground in the children's room. The item is made of solid pine and the surface is painted white. The textile set in the design "Space Shuttle", consisting of the curtain with the great depiction of a fire engine, is also included. The textiles are 100% polyester and washable at 30 ° C. The imaginative design makes playing a lot of fun. A roll -out slatted frame with 15 slats (approx. W: 70mm x H: 1.7mm) is included. The fall protection provides additional safety and has a rung look at the front, while at the back it consists of two panels. The distance from the floor to the top edge of the fall protection is approx. 114cm, the entrance height to the top edge of the bed is approx. 81.5cm and the height from the top of the bed to the top edge of the fall protection is approx. 32cm. The headboard and footboard have a closed panel with a milled ornamentation on the outside. The panel is smooth on the inside. The ladder is slanted and can be installed on the right or left. It has approx. 35cm wide steps that allow you to safely climb up and down. In addition, the ladder has handle holes that are great for holding onto. The space under the bed, from the floor to the lower edge of the bed, is approx. 72.5cm high and can still be used as storage space. The high -quality workmanship and very good stability characterize this bed. The post thickness is approx. 55.5 x 55.5mm. Max. Mattress height approx. 20cm. Not suitable for children under 6 years of age. The product is disassembled for easy self -assembly. The mattress, pillows and decorations are not included. FSC® certified and built according to EN 747-2: 2012+A1 (2015). The bed itself is approx. 207.6cm W x 97.6cm D. The ladder requires a depth of approx. 37.1cm. Required floor space approx. W: 207.6cm x H: 114.7cm x D: 134.7cm.