Built-In Ladder & Trundle Bed Toddler Beds

Perfect, just what I needed. Peter. Epping, GB. Wed Oct 30 2024

A bunk bed made of durable birch wood can be used as two separate beds

Excellent fitted perfectly in the area I needed, was eays to set up and very spacepous and hes helped in the boys bedroom. Jamie. Thu Jul 23 2026

Trundle beds thanks to the lower bed extension and storage system save space in a child's room.An additional advantage of our double children's beds is the possibility to buy drawers, where you can hide toys and children's things is a very practical function, especially important where every centimeter of space counts. Drawers are very durable, thanks to fixing the bottom for screws you can even store very heavy things in them. Children very much like to sleep with their colleagues, in such situations, having a trundle bed you will not have to worry about where to put your guests, trundle beds work great.Jula children's trundle beds are made very solid, legs, frame and frame under the mattress are made of solid first-class wood with rounded edges, the sides of a high-quality MDF. Paints that are used to paint double beds are ecological and 100% safe for your child. Trundle beds can be ordered in one of four available colors: white, rosewood, tick and whitewashed oak, all colors are included The instruction for the installation of trundle children's beds has been prepared in a very simple and accessible way, so that even a layperson can do without much effort with its submission. Of course, we provide assistance at every stage of bedding and we offer our help. We offer five different sizes of double beds, so that they can be adapted to any size of the room.The bed is suitable for 10-12 cm mattresses.The external size is always obtained by adding 7cm to the length and width of the bed. The bed is available in the following sizes:Mattress size: 140x70 160x80 180x80 180x90 200x90External dimension: 147x77 167x87 187x87 187x97 207x97The color of the beds in the photos may vary slightly depending on the settings and model of the monitor.

The loft bed from the series Pino is an ideal bed for sleeping, playing, and dreaming. The lying surface is 90 x 200 cm. It is made of solid pine and has a post thickness of 64 x 64 mm. The finish is lacquered. It is fully equipped, with a roll-up slatted frame and a ladder. The textile set in the design "Dino", consisting of the curtain with the great representation of a fire engine, is also included. The textiles are 100% polyester, and washable at 30°. The imaginative design brings a lot of fun while playing, it is an adventure playground for every child's room. The ladder (approx. 35 cm wide) can be mounted on the left or right. The all-around fall protection, the wide steps for safe climbing up and down, as well as the high-quality workmanship and good stability, distinguish this article. The height from the upper edge of the bedside to the upper edge of the fall protection is approx. 36 cm, with a max. mattress height of approx. 20 cm. The space under the bed can be used for playing or as storage space. The height from the floor to the lower edge of the bedside is approx. 72 cm. The distance between the ladder and the bedpost is approx. 157 cm. As for floor space in the room, you need approx. W: 210 x D: 106 cm. The height is approx. 114 cm. The bed is not suitable for children under 6 years. The decoration and the mattress are not included. The article is disassembled with assembly instructions for easy self-assembly. FSC® certified and built according to EN 747-2:2012+A1(2015).

Great bed perfect for my little boy. Easy to assemble and exactly as advertised. Anonymous. Sat Aug 26 2023

This house bed in a country house look, with a lying surface of 90 x 200 cm, is a great place to sleep, play, and dream. The support material of the bed base frame is solid pine lacquered in "Oak-Color". This warm colour forms a pleasant contrast to the white front. This is elaborately designed like a house facade with a planked look. The front, as well as the bedsides and roof panels, are made of high-quality MDF, painted white. The large entrance in the middle is approx. 69 cm wide and 88.5 high. The two windows on the right and left are approx. 35 cm wide and 45 cm high. The upper part of the windows has bars, and the opening below has a height of 27 cm. The bed is open at the head and foot part, as well as to the back. A slatted frame is already included. The height of the bedsides in the front is approx. 16 cm, which means that the mattress can be inserted to a depth of approx. 10 cm and the floor clearance is approx. 20 cm. At the head and foot part, there is an approx. 30 cm high bedside panel. The square bars of the roof construction have a dimension of approx. : W: 4,5 x D: 4,5 cm. The entrance height is approx. 36 cm. The roof is made of MDF and slopes down towards the front. At the back, it has a maximum height of approx. 174 cm, at the front of approx. 125 cm. A nice detail is the rounded edge of the roof at the front. The product has a high-quality finish and the fittings are made of metal. Warning: The roof must not be climbed on. The mattress and decoration are not included. The goods are disassembled, with assembly instructions for easy self-assembly. Footprint approx.: W: 214.2 x H: 174 x D: 105.3/191 (bed drawer extended) cm. The bed drawer with an inner dimension of approx. 90 x 190 cm is included in the delivery. The material is high-quality MDF lacquered white. The front of the bed drawer is smooth. The two-handle recesses are a nice detail and make it easier to pull out and push in at the same time. The roller pull-out makes the drawer easy to use. The internal height of the bed drawer is approx. 12 cm. The continuous base plate is decor-coated and allows the drawer to be used as additional storage space. The external dimensions of the bed drawer are approx.: W: 198.5 x H: 18.5 x D: 94 cm. The decoration, bed linen, and mattress are not included. The article is delivered disassembled, with assembly instructions for easy self-assembly.

Wunderschönes und gemütliches Bett für Kinder. Sehr gute Qualität. Hier kann man sich nur wohlfühlen.. Julia. Recklinghausen, DE. Sun Jan 09 2022

This loft bed is ideal for the children's room. It has a lot of function in a small space and is made of solid pine, in a gray lacquered finish. The lying surface at the top is 140 x 200 cm and the ladder and the roller-slatted frame are included. The upper-lying surface has a 55 cm high circumferential fall protection. The ladder (35 cm wide) is slanted and can be mounted on the left or right. Wide steps for safe ascent and descent. The clear height under the bed is approx. 146 cm. The space under the bed is used for a large writing desk. It makes optimum use of the space and offers plenty of room as a work surface and shelf. The working height is approx. 75 cm and the legroom under the top is approx. 65 cm. The size of the top is approx. W: 205 x D: 65 cm. The bed has a high-quality finish and is characterized by very good stability. The post thickness is approx. 6.4 x 6.4 cm, the bedsides, and the fall protection are 2.0 cm thick. The footprint of the loft bed: W: 209.4 H: 190 D: 149/214.7 cm (incl. ladder). The goods are disassembled for easy self-assembly. Max. Mattress height approx. 18.5 cm. Not suitable for children under 6 years. The decoration is not included. FSC® certified and built according to EN 747-1.

This bed is amazing. Strong and steady, my son loves it. The service and assembly was professional.. Dawn. Seaham, GB. Wed May 26 2021

This loft bed with 1 sleeping accommodation above and a writing desk below is ideal for the children's room. It has a lot of function in a small space and is made of solid pine, in a gray lacquered finish. The sleeping surface on top is 90 x 200 cm each and the ladder, as well as the rolling slatted frame, are included. The upper-lying surface has high circumferential fall protection. The ladder can only be mounted in the middle. Wide steps for safe climbing up and down. The bed has a high-quality finish and is characterized by very good stability. Under the bed, there is a writing tablet that can be mounted on the right or left (dimensions approx. W: 120 x D: 70 cm), and behind the ladder, there is a shelf. There is plenty of space to store writing utensils and books. The bed is not suitable for children under 6 years. The post thickness is approx. 6.4 x 6.4 cm, the bedsides, and the fall protection are 2.0 cm thick. Product dimensions: W: 208 H: 175 D: 105 cm. The product is disassembled for easy self-assembly. Max. Mattress height approx. 15 cm. Not suitable for children under 6 years. The decoration is not included. FSC® certified and built according to EN 747-2:2012+A1(2015).

Son absolutely loves his new bed! It's very sturdy and good condition. Everything delivered (no missing pieces) and was even delivered early. So far couldn't fault it (although husband was the one to battle through the instructions to build it!).. C. Keswick, GB. Sun Dec 12 2021

Trundle beds thanks to the lower bed extension and storage system save space in a child's room.An additional advantage of our double children's beds is the possibility to buy drawers, where you can hide toys and children's things is a very practical function, especially important where every centimeter of space counts. Drawers are very durable, thanks to fixing the bottom for screws you can even store very heavy things in them. Children very much like to sleep with their colleagues, in such situations, having a trundle bed you will not have to worry about where to put your guests, trundle beds work great.Jula children's trundle beds are made very solid, legs, frame and frame under the mattress are made of solid first-class wood with rounded edges, the sides of a high-quality MDF. Paints that are used to paint double beds are ecological and 100% safe for your child. Trundle beds can be ordered in one of four available colors: white, rosewood, tick and whitewashed oak, all colors are included The instruction for the installation of trundle children's beds has been prepared in a very simple and accessible way, so that even a layperson can do without much effort with its submission. Of course, we provide assistance at every stage of bedding and we offer our help. We offer five different sizes of double beds, so that they can be adapted to any size of the room.The bed is suitable for 10-12 cm mattresses.The external size is always obtained by adding 7cm to the length and width of the bed. The bed is available in the following sizes:Mattress size: 140x70 160x80 180x80 180x90 200x90External dimension: 147x77 167x87 187x87 187x97 207x97The color of the beds in the photos may vary slightly depending on the settings and model of the monitor.

This mid-sleeper bed is made of solid pine wood and features a slide, making it the perfect place for playing and sleeping. The fabric set is included in the delivery and consists of a tunnel and a curtain featuring a princess design. The light tone of the fabric harmonizes wonderfully with the playful patterns of the princess theme. The front curtain has an open entranceway which is covered by a flap that can easily be rolled up. The fabric in this set is made of 100% cotton and can be washed at 30°C. The space underneath the bed is the perfect play area or can be used as a practical storage space. The ladder and slide can be installed on either the left or right side of the bed. This bed is characterized by its high-quality workmanship, stable construction, surrounding safety rails, and wide ladder rungs for safely climbing up and down.

Fab quality, my little one loves it so much and can’t wait to sleep in it. Leah. Bradford, GB. Fri Apr 16 2021

The loft bed from the series Pino is an ideal bed for sleeping, playing, and dreaming. The lying surface is 90 x 200 cm. It is made of solid pine and has a post thickness of 64 x 64 mm. The finish is lacquered. It is fully equipped, with a roll-up slatted frame and a ladder. The textile set in the design "FIRE RESCUE", consisting of the curtain with the great representation of a fire engine, is also included. The textiles are 100% polyester, and washable at 30°. The imaginative design brings a lot of fun while playing, it is an adventure playground for every child's room. The ladder (approx. 35 cm wide) can be mounted on the left or right. The all-around fall protection, the wide steps for safe climbing up and down, as well as the high-quality workmanship and good stability, distinguish this article. The height from the upper edge of the bedside to the upper edge of the fall protection is approx. 36 cm, with a max. mattress height of approx. 20 cm. The space under the bed can be used for playing or as storage space. The height from the floor to the lower edge of the bedside is approx. 72 cm. The distance between the ladder and the bedpost is approx. 157 cm. As for floor space in the room, you need approx. W: 210 x D: 106 cm. The height is approx. 114 cm. The bed is not suitable for children under 6 years. The decoration and the mattress are not included. The article is disassembled with assembly instructions for easy self-assembly. FSC® certified and built according to EN 747-2:2012+A1(2015).

This bunk loft bed with 2 sleeping accommodations for the children's room has a special height of 182 cm. It is made of solid pine, in a gray lacquered finish. The lying surfaces are each 90 x 200 cm and the ladder and 2 roll-up slatted frames are included. The upper-lying surface has circumferential fall protection. The ladder can be mounted on the left or right. The bunk bed can be converted back into 2 single beds if required as the posts are split. The distance between the lying surfaces is approx. 110 cm, the ground clearance approx. 20 cm. Wide steps for safe climbing up and down. The bed has a high-quality finish and is characterized by very good stability. The post thickness is approx. 6.4 x 6.4 cm, the bedsides, and the fall protection are 2.0 cm thick. Product dimensions: W: 210 H: 182 D: 105 cm. The product is disassembled for easy self-assembly. Max. Mattress height approx. 20 cm. Wall mounting is required. Not suitable for children under 6 years. The decoration is not included. FSC® certified and built according to EN 747-2:2012+A1(2015).

Anonymous. Tue Oct 08 2024

The loft bed from the series Pino is an ideal bed for sleeping, playing and dreaming. The lying surface is 90 x 200 cm. It is made of solid pine and has a post thickness of 64 x 64 mm. The finish is lacquered. It is fully equipped, with a roll-up slatted frame and the ladder. The textile set in the design "Princess Sophie", consisting of the curtain with the great representation of a fire engine, is also included. The textiles are 100% polyester, washable at 30°. The imaginative design brings a lot of fun while playing, it is an adventure playground for every child's room. The ladder (approx. 35 cm wide) can be mounted on the left or right. The all-round fall protection, the wide steps for safe climbing up and down, as well as the high-quality workmanship and good stability, distinguish this article. The height from the upper edge of the bed side to the upper edge of the fall protection is approx. 36 cm, with a max. mattress height of approx. 20 cm. The space under the bed can be used for playing or as storage space. The height from the floor to the lower edge of the bed side is approx. 72 cm. The distance between ladder and bedpost is approx. 157 cm. As floor space in the room you need approx. W: 210 x D: 106 cm. The height is approx. 114 cm. The bed is not suitable for children under 6 years. The decoration and the mattress are not included. The article is disassembled with assembly instructions for easy self-assembly. FSC® certified and built according to EN 747-2:2012+A1(2015).

The loft bed from the series Pino is an ideal bed for sleeping, playing, and dreaming. The lying surface is 90 x 200 cm. It is made of solid pine and has a post thickness of 64 x 64 mm. The finish is lacquered. It is fully equipped, with a roll-up slatted frame and a ladder. The textile set in the design "Space Shuttle", consisting of the curtain with the great representation of a fire engine, is also included. The textiles are 100% polyester, and washable at 30°. The imaginative design brings a lot of fun while playing, it is an adventure playground for every child's room. The ladder (approx. 35 cm wide) can be mounted on the left or right. The all-around fall protection, the wide steps for safe climbing up and down, as well as the high-quality workmanship and good stability, distinguish this article. The height from the upper edge of the bedside to the upper edge of the fall protection is approx. 36 cm, with a max. mattress height of approx. 20 cm. The space under the bed can be used for playing or as storage space. The height from the floor to the lower edge of the bedside is approx. 72 cm. The distance between the ladder and the bedpost is approx. 157 cm. As for floor space in the room you need approx. W: 210 x D: 106 cm. The height is approx. 114 cm. The bed is not suitable for children under 6 years. The decoration and the mattress are not included. The article is disassembled with assembly instructions for easy self-assembly. FSC® certified and built according to EN 747-2:2012+A1(2015).

The loft bed from the series Pino is an ideal bed for sleeping, playing and dreaming. The lying surface is 90 x 200 cm. It is made of solid pine and has a post thickness of 64 x 64 mm. The finish is lacquered. It is fully equipped, with a roll-up slatted frame and the ladder. The textile set in the design "Pet Shop", consisting of the curtain with the great representation of a fire engine, is also included. The textiles are 100% polyester, washable at 30°. The imaginative design brings a lot of fun while playing, it is an adventure playground for every child's room. The ladder (approx. 35 cm wide) can be mounted on the left or right. The all-round fall protection, the wide steps for safe climbing up and down, as well as the high-quality workmanship and good stability, distinguish this article. The height from the upper edge of the bed side to the upper edge of the fall protection is approx. 36 cm, with a max. mattress height of approx. 20 cm. The space under the bed can be used for playing or as storage space. The height from the floor to the lower edge of the bed side is approx. 72 cm. The distance between ladder and bedpost is approx. 157 cm. As floor space in the room you need approx. W: 210 x D: 106 cm. The height is approx. 114 cm. The bed is not suitable for children under 6 years. The decoration and the mattress are not included. The article is disassembled with assembly instructions for easy self-assembly. FSC® certified and built according to EN 747-2:2012+A1(2015).

The loft bed from the series Pino is an ideal bed for sleeping, playing and dreaming. The lying surface is 90 x 200 cm. It is made of solid pine and has a post thickness of 64 x 64 mm. The finish is lacquered. It is fully equipped, with a roll-up slatted frame and the ladder. The textile set in the design "Caribian Pirate", consisting of the curtain with the great representation of a fire engine, is also included. The textiles are 100% polyester, washable at 30°. The imaginative design brings a lot of fun while playing, it is an adventure playground for every child's room. The ladder (approx. 35 cm wide) can be mounted on the left or right. The all-round fall protection, the wide steps for safe climbing up and down, as well as the high-quality workmanship and good stability, distinguish this article. The height from the upper edge of the bed side to the upper edge of the fall protection is approx. 36 cm, with a max. mattress height of approx. 20 cm. The space under the bed can be used for playing or as storage space. The height from the floor to the lower edge of the bed side is approx. 72 cm. The distance between ladder and bedpost is approx. 157 cm. As floor space in the room you need approx. W: 210 x D: 106 cm. The height is approx. 114 cm. The bed is not suitable for children under 6 years. The decoration and the mattress are not included. The article is disassembled with assembly instructions for easy self-assembly. FSC® certified and built according to EN 747-2:2012+A1(2015).

Made from solid pine wood and high-quality MDF, this bed is not only sturdy but also durable. The upper bed is equipped with a continuous railing that provides additional safety and protects the user from falling. The actual colours may vary slightly due to photographic lighting or your monitor settings.

This chic bunk bed with 2 sleeping accommodations for the children's room, is practical and space-saving. It is made of solid pine, in the gray lacquered finish. The lying surfaces are each 90 x 200 cm and the ladder and 2 roll-up slatted frames are included. The upper lying surface has a circumferential fall protection. The ladder can be mounted on the left or right. In addition, the two shoulder trays under the bed are included. These can be used as additional storage space. The bunk bed can be converted back into 2 single beds if required as the posts are split. Wide steps for safe climbing up and down. The bed has a high quality finish and is characterized by very good stability. The distance between the lying surfaces is approx. 68 cm, the ground clearance approx. 20 cm. The post thickness is approx. 6.4 x 6.4 cm, the bed sides and the fall protection are 2.0 cm thick. Product dimensions: W: 210 H: 140 D: 105 cm. The product is disassembled for easy self-assembly. Max. Mattress height approx. 20 cm. Wall mounting is required. Not suitable for children under 6 years. The decoration is not included. FSC® certified and built according to EN 747-2:2012+A1(2015).

This bunk loft bed with 2 sleeping accommodations for the children's room has the height of 140 cm. It is made of solid pine, in the gray lacquered finish. The lying surfaces are each 90 x 200 cm and the ladder and 2 roll-up slatted frames are included. The upper lying surface has a circumferential fall protection. The ladder can be mounted on the left or right. The bunk bed can be converted back into 2 single beds if required as the posts are split. Wide steps for safe climbing up and down. The bed has a high quality finish and is characterised by very good stability. The practical bed drawer on rollers is also included. The finish is pine grey lacquered. The internal dimensions of the bed drawer are W: 195 x H: 10 D: 90 cm, including a base plate on which the mattress is placed. A mattress itself is not included in the delivery. Due to the roller guide it can be easily pulled out and pushed in. The distance between the lying surfaces is approx. 68 cm, the ground clearance approx. 20 cm. The post thickness is approx. 6.4 x 6.4 cm, the bed sides and the fall protection are 2.0 cm thick. Product dimensions: W: 210 H: 140 D: 105 + 90 cm for the extended bed drawer. The product is disassembled for easy self-assembly. Max. Mattress height approx. 20 cm. Not suitable for children under 6 years. The decoration is not included. FSC® certified and built according to EN 747-2:2012+A1(2015).

This loft bed with 1 sleeping accommodation above is ideal for the children's room or the student apartment. It has a lot of function in a small space and is made of solid pine, in the gray lacquered finish. Each of the top sleeping surfaces is 140 x 200 cm and the ladder and roll-up slatted frame are included. The upper lying surface has a high circumferential fall protection. The ladder is slanted and can be mounted on the left or right. Wide steps for safe climbing up and down. The clear height under the bed is approx. 145 cm. The practical armchair with seat cushion, which can be converted into an armchair bed, is also included. It is made of solid pine and painted grey. The edges are rounded and by simply pulling it out, a lying surface measuring approx. 76 x 190 cm can be created. The slatted frame is already included in the delivery. The seat cushion is also included and is simply folded out to the front, it also serves as a mattress. The fabric is black, 100% polyester, removable and hand washable at 30°. Product dimensions armchair: W: 80 H: 68 D: 85 cm, the depth extended is 206 cm. Especially in small rooms this second sleeping unit is a real advantage. The bed has a high quality finish and is characterised by very good stability. The post thickness is approx. 6.4 x 6.4 cm, the bed sides and the fall protection are 2.0 cm thick. Product dimensions loft bed: W: 209 H: 190 D: 215 cm. The decoration is not included. The product is disassembled for easy self-assembly. Max. Mattress height approx. 18.5 cm. Not suitable for children under 6 years. The decoration is not included. FSC® certified and built according to EN 747-1.