Vipack Children’s Standard Beds

A very nice metal bed from the New York collection. The high-quality surface is powder-coated and has a beautiful colour depth. The tubular frame gives the bed a high level of stability and the horizontally- and vertically-extending struts of the head- and footboards are already mounted. The wide bedsides provide insertion depth for the mattress. The slatted frame with 14 slats is already included. The product is delivered disassembled with mounting instructions for easy self-assembly.

Really nice bed. Clips to hold the slats broke on one and replacement bed took a while to come. However once I received the replacement I haven’t looked back!. Kathleen. Bellaghy Magherafelt, GB. Wed Jul 22 2020

This beautiful standard bed features a rounded head and footboard. The materials consist of high-quality MDF. The lying surface is 90 x 200cm and the slatted frames are included in the delivery. The retro style is complemented by the solid legs, which are slanted. The insert depth for the slatted frame and mattress is approximately 9cm. The bed is open and stands 15cm off the ground. The mattress and the decorations are not included. The product needs assembly and is easy to assemble using the included instructions.

Lovely cute bed but had some damage. Rosemary. Belfast. Fri Jan 13 2023

This European single canopy bed is a great place to sleep and play. The base is made from solid wood and high-quality MDF. The surface of the bed is surrounded by a rail on the front and sides. This is a nice detail, which gives the bed the look of a house, as do the struts which make up the roof. These also contribute to the stability of the bed, as do the bedposts. The completely closed roof features vertical milled details. You can get to the surface of the bed through a wide entrance. The bed is low, which makes it very easy to reach. It does not come with a slatted frame and is suitable for solid slatted frames. The back of the bed has a panel up to the bottom of the rail. Above this, the bed is open. This is a high-quality product with metal fittings. The slatted frame, mattress, and decorations are not included in the delivery. The product comes unassembled and is easy to assemble using the installation instructions included.

Das Bett ist sehr schön. Lieferung erfolgt super schnell, auch hier alles ok. Das Bett scheint von guter Qualität zu sein und wirkt stabil. Unser Sohn findet es toll! Ich hatte leider überlesen, dass der Lattenrost nicht im Lieferumfang enthalten ist. Also am Besten gleich mitbestellen falls keins vorhanden ist.. Kristin. DE. Sun Feb 21 2021

This nice nostalgic metal standard bed from this collection has a lying surface of 90 x 200cm. The high-quality bedstead is powder-coated. The strong tube frame makes the bed particularly sturdy and stable. The head and footboards, which have vertically extending bars, are already installed. The bed has raised edges in the corners, which range from 15-24cm high, ensuring that the mattress stays firmly in place. Slatted frames are included in the delivery. The bed stands 23cm off the floor. The mattress, as well as the decoration, are not included in the delivery. The product is disassembled for simple self-assembly. Assembly instructions are included.

Gorgeous bed and wonderful quality. My daughter is very happy with it.. Talitha. London, GB. Tue May 14 2019

This beautiful European single bed, from the Eddy collection, features a head and footboards with a linear design, and sturdy bedposts. The head and footboards are made of solid pine wood, while the sides of the bed are made of high-quality MDF . The surfaces have a white painted finish. The central parts of the head and footboards have a plank-effect look that embodies the country house style. The headboard is approximately 77cm high and the footboard is approximately 48cm high. The bed is only suitable for use with a fixed slatted frame, due to the metal corner braces. The depth of the recess for the slatted frame and mattress is approximately 12cm. There is open space under the bed, with a floor clearance of about 20cm. The slatted frame, mattress and accessories are not included. The fittings are made of metal. The product requires some simple self assembly. Assembly instructions are included.

Alles top.... Sonja. Meppen, DE. Tue Dec 26 2017

The teepee-look bed, including the textile tent roof, is something unusual for the children's room. Since this is screwed to the frame support slats, there is also a distance to the floor, which allows air circulation. The frame is made of solid pine (60 x 30mm), with the upper tips and the cross-bracing (approx. 60mm high) painted white. The same goes for the bed frame (approx. 11.7cm high), which offers an insertion depth of approx. 4.5cm for the mattress. The textile tent roof is particularly chic, in light grey with a white zigzag pattern at the top. With a large opening at the front (approx. 100cm wide and 80cm high), on the right and left with around window opening (approx. 25cm), and open at the side. The tent roof is closed at the back and attached to the sides of the bed with hook and loop fasteners. The fabric can be cleaned during cleaning - it is not washable. The fittings are made of metal.

Top Qualität guter Preis was will man mehr !!!. Gökan. Ingolstadt, DE. Wed Apr 10 2024

This junior bed with bed drawer is an ideal interim solution for your child when they are already standing up on their own. Nevertheless, it is protected at night by the horizontal panels of the fall-out protection. Every child will enjoy it and the bed invites you to dream and cuddle. The bed surface is 70 x 140cm. A roll-out slatted frame with 11 slats is included. The body is made of high-quality MDF, painted white and very stable due to the 9cm wide feet. The circumferential fall protection has a height from the floor to the top of the panel of approx. 56cm. At the front, it is approx. 48cm high. The entrance to the bed is approx. 50cm wide, with an entrance height of approx. 25cm. Depending on the installation, the entrance can be on the right or the left. The bed has a ground clearance of approx. 16cm. An inlay depth of approx. 5cm is available for the mattress. The practical bed drawer for sliding under the junior bed from Vipack is included. It is made of high-quality MDF, painted white. The base plates are made of wood-based material and coated in white melamine. The roller guide makes it easy to pull out or push in the drawer. It can be used as additional storage space for blankets or bed linen. It is not suitable as an additional bed surface. The inside dimensions of the drawer are approximately 133.5cm W x 12cm H x 70cm D. The fittings are made of metal and the item is sturdy and high-quality. The product is disassembled and easy to assemble with detailed assembly instructions. The item is not suitable for children under 4 years of age. The mattress and the decorations are not included. The floor space of the junior bed is approximately 148cm W x 60cm H x 76cm D. When the bed drawer is pulled out, the depth is approx. 150cm.

das ist normal. Nasro. Kassel, DE. Tue Feb 13 2024

The teepee bed with a lying surface of 90 x 200cm, including the textile tent roof, is something unusual for the children's room. It combines a full-fledged bed with a playful look. The finish is solid pine, partly natural lacquered, partly white lacquered. The item is characterized by high-quality workmanship and good stability. The bedposts measure approx. 60 x 30mm, the bedside is approx. 9cm high. The distance from the floor to the top of the bed is 29cm. The distance between the upper edge of the bedside and the 60mm thick upper crossbar is approx. 105cm. The textile tent roof is particularly chic in light gray with a white zigzag pattern at the top. With a large opening at the front, around the window opening (approx. 25cm) on the right and left, and open at the side. The tent roof is closed at the back and attached to the sides of the bed with hook and loop fasteners. The fabric can be cleaned during cleaning - it is not washable.

Brilliant. Anonymous. Fri Oct 20 2023

The bed drawer is suitable for the Dallas house bed series by VIPack and offers additional storage space for blankets or bed linen. The front and sides are made of solid pine painted white. It has internal dimensions of approx. 194cm W x 17cm H x 90cm D. The base plates are coated throughout and decor. It is also suitable for a 90 x 190cm mattress, with a maximum mattress height of 17cm. Due to the roller guide and the two handle recesses in the front, it can be easily pulled out and pushed in. The product is of high quality and sturdy. The fittings are made of metal. The mattress and decoration are not included. Delivery includes only the bed drawer. The product is disassembled, with assembly instructions for easy self -assembly. Approx. Footprint: 198.5cm W x 18.5cm H x 94cm D

The bed drawer is suitable for the Dallas house bed series by VIPack and offers additional storage space for blankets or bed linen. The front and sides are made of solid pine with an anthracite finish. It has internal dimensions of approx. 194cm W x 17cm H x 90cm D. The base plates are coated throughout and decor. It is also suitable for a 90 x 190cm mattress, with a maximum mattress height of 17cm. Due to the roller guide and the two handle recesses in the front, it can be easily pulled out and pushed in. The product is of high quality and sturdy. The fittings are made of metal. The mattress and decoration are not included. Delivery includes only the bed drawer. The product is disassembled, with assembly instructions for easy self -assembly. Approx. Footprint: 198.5cm W x 18.5cm H x 94cm D

Styliani. Krefeld, DE. Thu May 11 2017

This is the perfect bed for little racers and aspiring race car drivers. It's an original addition to any child's room.

My son is obsessed with cars in general so is absolutely over the moon with his new bed! It was easy to put together and the design is gorgeous! The bonnet has a small bit of storage (which could be bigger) but not what I bought it for so 5* from me xxxx. Beverly. Liverpool, GB. Mon Oct 07 2019

This teepee bed with a lying surface of 90 x 200cm and a bed drawer on castors is something unusual for a child's room. It combines a full-fledged bed with a playful look. The upper crossbar can still be nicely decorated with textiles. The finish is solid pine, partly natural lacquered, and partly white lacquered. The item is characterized by high-quality workmanship and good stability. The bedposts measure approx. 60 x 30mm, the bedside is approx. 9cm high. An inlay depth of approx. 5cm is available for the mattress. The distance between the upper edge of the bedside and the 60mm thick upper crossbar is approx. 105cm. The bed drawer offers additional storage space for blankets or bed linen. The front and sides are made of natural, solid pine wood. The base plates are coated throughout and decorated. It is also suitable for a 90 x 190cm mattress, with a maximum mattress height of 17cm. Thanks to the roller guide and the two handle recesses in the front, it can be easily pulled out and pushed in. The product is of high quality and sturdy. The fittings are made of metal. When the bed drawer is pulled out, the depth is approx. 190cm.

Great bed! Quite sturdy and easy to put together. Tudor. London, GB. Mon Jul 04 2022

Goli. Sutton, GB. Thu Mar 22 2018

This is a beautiful single bed with a lying surface of 90 x 200cm, curved head and footboards and stable bed posts, from the Amori collection. It is made of high-quality MDF, and the surface has a white lacquer. The heart-shaped cur outs in the head and footboard are a nice, pretty detail. All fittings are made of metal. The insert depth for slatted frame and mattress is approximately 10cm. There is open space underneath the bed. All fittings are made of metal. The product comes unassembled and is easy to build using the included instructions. The floor space required is 80cm H x 212cm W x 96cm D.

I bought one about a month ago, the bed looks good but the wood frame that supports the mattress is not very strong. Gona. Ipswich Borough Council, GB. Fri Oct 17 2025

Unbekannt. Deutschland. Thu Jan 02 2014

The bed has a lying surface of 90 x 200cm. It combines a full-fledged bed with a playful look. The finish is solid pine, partly natural lacquered, partly white lacquered. The upper crossbar can still be nicely decorated with textiles. A roll-out slatted frame with 17 slats is included. The item is characterized by high-quality workmanship and good stability. The bedposts measure approx. 60 x 30mm, the bedside is approx. 9cm high and the ground clearance is approx. 20cm. The distance between the upper edge of the bedside and the 60mm thick upper crossbar is approx. 105cm.

Charalampos. Ludwigsburg. Sun Jul 16 2017

Wonderful single bed frames with curved bed heads and footboards as well as sturdy bedposts. Its frame is made of high-quality MDF and finished in white lacquer. The back side panel is also curved and features a lovely heart shape cut-out of detail. Due to the metal corner braces, the bed is only suitable for stiff slatted frames and not for roll frames. The bed is open at the bottom. Fittings made of metal.

Das Bett kam Rückblick geliefert. Die Qualität ist sehr gut. Das aufbauen ging recht einfach mit der Beschreibung. Es ist sehr stabile se nur weiter zu empfehlen. Anonymous. Sun Aug 04 2019

The teepee bed with a bed surface of 90 x 200cm and bed drawer on castors, including the textile tent roof, is something unusual for the children's room. It combines a full-fledged bed with a playful look. The finish is solid pine, partly natural lacquered, and partly white lacquered. A roll-out slatted frame with 17 slats is included. The item is characterized by high-quality workmanship and good stability. The bed posts measure approx. 60 x 30mm, the bedside is approx. 9cm high. The distance from the floor to the top of the bed is 29cm. An inlay depth of approx. 5cm is available for the mattress. The distance between the upper edge of the bedside and the 60mm thick upper crossbar is approx. 105cm. The textile tent roof is particularly chic in light gray with a white zigzag pattern at the top. With a large opening at the front, a round window opening (approx. 25cm) on the right and left, and an open at the side. The tent roof is closed at the back and attached to the sides of the bed with hook and loop fasteners. The fabric is made of 100% polyester and can be cleaned during cleaning - it is not washable. The bed drawer offers additional storage space for blankets or bed linen. The front and sides are made of natural solid pine. It has internal dimensions of approx. 194cm W x 17cm H x 90cm D. The base plates are coated throughout and decorated. It is also suitable for a 90 x 190cm mattress, with a maximum mattress height of 17cm. Thanks to the roller guide and the two handle recesses in the front, it can be easily pulled out and pushed in. The product is of high quality and sturdy. The fittings are made of metal. Required floor space approx. W: 206cm x H: 158.2cm x D: 98cm. When the bed drawer is pulled out, the depth is approx. 190cm. The item is disassembled, with assembly instructions for easy self-assembly. The decoration and the mattress are not included. The item is not suitable for children under 4 years of age. FSC® certified.

Lovely bed - exactly as imagined but took forever to come! Do not believe estimated delivery date!. Carolyn. Eastbourne, GB. Sun Apr 21 2024

This modern, European single-size house bed comes with a side rail. The roof structure is included, and can be decorated with fabric to suit. The base is made of natural-coloured, solid pine wood. The headboard and footboard, as well as the side rail, all have a slatted design, with the slats sitting approximately 70mm apart. This means you can also use scatter cushions for extra support, turning the bed into a seat. It also includes a slatted frame. The mattress recess is approximately 4cm deep. It has a floor clearance of about 20cm. The headboard, footboard and side rail are approximately 65cm tall. The square bars of the roof structure are approximately 5cm W x 5cm D in size. The edge of the roof is 120cm high, rising to a total height of 170cm. The underbed drawer is included, and can be used for storing blankets and bed clothes. It has internal dimensions of approximately 17cm H x 90cm W x 194cm D. The drawer has a solid base, and has been coated to match the bed. The roller glides and two recessed handles on the front make it easy to pull out and push back in. The piece has a high-quality and sturdy finish. The fittings are made of metal. The mattress and accessories are not included. The product requires self-assembly, using the simple assembly instructions included. It measures approximately 170cm H x 210cm W x 97cm D in total.

Ruxandra. London, GB. Wed Mar 08 2023

The MODULO single and stacking bed combines smart design and space-saving solutions. This bed offers you the comfort of a single bed for the children's room or guest room. It is designed so that two or three beds can be placed on top of each other. Ideal for small spaces. The single bed has a lying surface of 90 x 200 cm and the slatted frame is already included (16 slats approx. 70 mm wide with 56 mm spacing). The support material is 1.8 cm thick and 16 cm bed sides made of high-quality MDF, painted grey. The corners of the bed sides are rounded. The interesting foot form in puzzle optics, sets optical accents with the bed. The feet are made of 20mm thick, solid pine and natural lacquered. They are worked in such a way that they interlock when the beds are stacked. Whether used individually or stacked, they always provide the bed with a high level of stability and sturdiness. The bed is also ideal for use under sloping ceilings. It has a total height of approx. 27.5 cm from the floor to the upper edge of the bed side. The floor clearance is approx. 11.5 cm, the insertion depth for the mattress approx. 11 cm, with a max. mattress height of approx. 18 cm. Scope of delivery is 1 bed, the decoration and mattress is not included. The article is stable and of high quality. The product is disassembled for easy self-assembly. Footprint approx: W: 203.6 x H: 27.5 x D: 93.8 cm.

The MODULO single and stacking bed combines smart design and space-saving solutions. This bed offers you the comfort of a single bed for the children's room or guest room. It is designed so that two or three beds can be placed on top of each other. Ideal for small spaces. The single bed has a lying surface of 90 x 200 cm and the slatted frame is already included (16 slats approx. 70 mm wide with 56 mm spacing). The support material is 1.8 cm thick and 16 cm bed sides made of high-quality MDF, painted grey. The corners of the bed sides are rounded. The interesting foot form in arrow optics, sets optical accents with the bed. The feet are made of 20mm thick, solid pine and natural lacquered. They are worked in such a way that they interlock when the beds are stacked. Whether used individually or stacked, they always provide the bed with a high level of stability and sturdiness. The bed is also ideal for use under sloping ceilings. It has a total height of approx. 27.5 cm from the floor to the upper edge of the bed side. The floor clearance is approx. 11.5 cm, the insertion depth for the mattress approx. 11 cm, with a max. mattress height of approx. 18 cm. Scope of delivery is 1 bed, the decoration and mattress is not included. The article is stable and of high quality. The product is disassembled for easy self-assembly. Footprint approx: W: 203.6 x H: 27.5 x D: 93.8 cm.

The MODULO single and stacking bed combines smart design and space-saving solutions. This bed offers you the comfort of a single bed for the children's room or guest room. It is designed so that two or three beds can be placed on top of each other. Ideal for small spaces. The single bed has a lying surface of 90 x 200 cm and the slatted frame is already included (16 slats approx. 70 mm wide with 56 mm spacing). The support material is 1.8 cm thick and 16 cm bed sides made of high-quality MDF, painted grey. The corners of the bed sides are rounded. The interesting foot form in smiley star optics, sets optical accents with the bed. The feet are made of 20mm thick, solid pine and natural lacquered. They are worked in such a way that they interlock when the beds are stacked. Whether used individually or stacked, they always provide the bed with a high level of stability and sturdiness. The bed is also ideal for use under sloping ceilings. It has a total height of approx. 27.5 cm from the floor to the upper edge of the bed side. The floor clearance is approx. 11.5 cm, the insertion depth for the mattress approx. 11 cm, with a max. mattress height of approx. 18 cm. Scope of delivery is 1 bed, the decoration and mattress is not included. The article is stable and of high quality. The product is disassembled for easy self-assembly. Footprint approx: W: 203.6 x H: 27.5 x D: 93.8 cm.

my 4 year old son loves it. Anonymous. Bridgwater, GB. Sat Nov 14 2020

The bunk play bed with a shelf for hanging and 3 spacious drawers, from the Pino collection is an ideal bed for sleeping, playing, and dreaming. It combines the look of a half-height bed but at a lower-lying height. The bed is easier to reach for both the child and the parents. In addition, it can be used very well under sloping roofs, making better use of the space. The bed is made of solid pine and has a post thickness of 55 x 55mm. The finish is painted gray. It has a surface area of 90 x 200cm and is fully equipped with a roll-up slatted frame and a ladder. The ladder (approx. 35cm wide) can be mounted on the left or right. The surrounding fall protection, the wide step for safe climbing up and down, as well as the high-quality workmanship and good stability, characterize this article. The height from the top edge of the bedside to the top edge of the fall protection is approx. 32cm, with a maximum mattress height of approx. 20cm. The small shelf on the fall protection is included. It can be universally hung on the side with the two metal hooks. The side panels have a height of approx. 7cm. You can also place books on the upper surfaces. The maximum load capacity is 2kg. The dimensions are approximately 79.3cm H x 9cm W x 21.2cm D. The space under the bed is used for the drawer set of 3 containers and creates order in the children's room. Everything finds its right place here and it looks tidy in no time. The drawers are made of high-quality MDF and painted gray. They run on castors and have a handle recess, which makes them easy to move. The inner dimensions of the drawers are approximately: W: 42.4cm x H: 29.3cm x D: 56.6cm. The front of the drawer is rounded at the corners and has a floor clearance of approx. 1.5cm. The storage space per drawer is approximately 49.6cm W x 39.6cm H x 60cm D. The distance between the ladder and the bedpost is approximately 157cm. The required floor space in the room is approximately 207.6cm W x 104.9cm D. The height is approx. 83cm. The bed is not suitable for children under 6 years of age. The decoration, the shelf, and the mattress are not included. The item is disassembled with assembly instructions for easy self-assembly.

Good quality, easy to put together and delivered on time. Kerri. St. Albans, GB. Mon May 06 2024

Modern house bed with lying area in 90 x 200cm. The roof structure is included and can be decorated with textiles. The carrier material is solid pine. The bed is open on all sides. A slatted frame is included. The side height of the bed is approx. 9cm, which gives a mattress insertion depth of approx. 4cm and the ground clearance is approx. 20cm. The square bars of the roof structure measure approx. 5cm W x 5cm D. These can be wonderfully decorated with textiles or a string of lights and thus create an individual atmosphere in a child's room. At the front, the roof edge has a height of 120cm and rises to a total height of 170cm. The product is of high quality and sturdy. The fittings are made of metal. The mattress and decoration are not included. The product is disassembled, with assembly instructions for easy self -assembly. Approximate footprint: 170cm H x 210cm W x 97cm D

The bunk play bed includes a slide and a shelf for hanging as well as 2 spacious drawers, from the Pino collection is an ideal bed for sleeping, playing, and dreaming. It combines the look of a half-height bed but at a lower-lying height. The bed is easier to reach for both the child and the parents. In addition, it can be used very well under sloping roofs, making better use of the space. The bed is made of solid pine and has a post thickness of 55 x 55mm. The finish is painted white. It has a surface area of 90 x 200cm and is fully equipped with a roll-up slatted frame, a slide, and a ladder. The ladder/slide is approx. 35cm wide and can be mounted on the left or right. The surrounding fall protection, the wide step for safe climbing up and down, as well as the high-quality workmanship and good stability, characterize this article. The height from the top edge of the bedside to the top edge of the fall protection is approx. 32cm, with a maximum mattress height of approx. 20cm. The small shelf on the fall protection is included. It can be universally hung on the side with the two metal hooks. The side panels have a height of approx. 7cm. You can also place books on the upper surfaces. The maximum load capacity is 2kg. The dimensions are approximately 79.3cm H x 9cm W x 21.2cm D. The space under the bed is used for the set of drawers consisting of 2 containers and creates order in the children's room. Everything finds its right place here and it looks tidy in no time. The drawers are made of high-quality MDF and painted white. They run on castors and have a handle recess, which makes them easy to move. The inner dimensions of the boxes are approx. 48.6cm W x 29.3cm H x 56.6cm D. The front of the drawer is rounded at the corners and has a floor clearance of approx. 1.5cm. The storage area per drawer is approximately 55.8cm W x 39.6cm H x 60cm D. The distance between the ladder and the slide is approx. 118.4cm. The required floor space in the room is approximately 207.6cm W x 175cm D. The height is approx. 83cm. The bed is not suitable for children under 6 years of age. The decoration, the shelf, and the mattress are not included. The item is disassembled with assembly instructions for easy self-assembly.

Unsere Tochter ist ganz begeistert von ihrem neuen Hochbett mit Rutsche. Aufgrund einer Dachschräge haben wir uns für dieses Bett entschieden. Es ließ sich sogar nur von 1 Person aufbauen. Es passt perfekt in unsere Schräge. Die Lieferung kam sogar vor den ursprünglichen Datum.. Manuela. Höchenschwand, DE. Wed Nov 29 2023

Great my grandson loves this hard to get him out of the bedroom. Glenys. Eccles Manchester, GB. Thu Nov 24 2022

Romantic house bed from the Amori range, with a bed surface measuring 90 x 200cm. The bed is a real highlight in the children's room and invites you to sleep, dream and play. The bed frame is made of solid pine wood. The sides are elaborately designed like a house facade in a planked look. The heart -shaped cut -outs on the right and left are a nice detail. The sides and roof panels are made of high -quality MDF, painted white. The bed is open at the front and back. A roll -out slatted frame is included. The side height of the bed is approx. 14.5cm, which gives a mattress insertion depth of approx. 8cm and the ground clearance is approx. 20cm. The square bars of the roof structure measure approx. 4.5cm W x 4.5cm D. Three wide struts are built into the roof structure, which provide additional stability. The roof must not be climbed or pulled up. At the front, the roof edge has a height of 122.9cm and rises to a total height of 171.7cm. The bed has an approximate footprint of 213cm H x 171.7cm H x 98.7cm D. It also includes a side rail. The material is high -quality MDF and the surface is painted white. It is mounted on the side of the bed and can be used on the right or left. The fall protection provides additional safety from falling out of bed. Dimensions: 120cm W x 20cm H x 1.6cm D The product is of high quality and sturdy. The fittings are made of metal. The mattress and decoration are not included. The product is disassembled, with assembly instructions for easy self -assembly.

Bed is amazing. Looks better then on the pictures. Thank you very much. Anonymous. Fri Feb 16 2024

This a dreamy canopy bed. The bed's surface area is 90 x 200cm, and it has a curved head and footboard, and stable bedposts. The bed is made of high-quality MDF with a lacquered-white surface. The heart-shaped cut-out on the head- and footboard is a nice touch. The canopy rods are included in the delivery. The mounting brackets for the drapes are 3cm H x 6cm W. A slatted frame is included. The insert depth for the slatted frame and mattress is approximately 10cm. The bed is open underneath. The fittings are made of metal. The product comes disassembled and is easy to assemble using the included instructions. Dimensions: 187cm H x 96cm W x 211cm L. Beautiful fabric set in plain white with pink edges can be used as curtains for the four-poster bed. It includes four single curtains (each 200cm H x 105cm W) which can be gathered together around the bedposts. It can be mounted on the upper rod. The textile set consists of 100% polyester, and cannot be washed.

Service was excellent and efficient. My daughter is loving her new bed. David. Borehamwood, GB. Sat Feb 22 2020

Children’s car bed frame police MDF with glossy blue lacquer and stunning police applications. The bedsides are curved and all edges are rounded. As a wonderful detail, the flared, fixed wheels feature replicated alloy rims. A real eye-catcher for any children’s room! At the front, the frame features practical storage space with a lid where the children can keep toys or a blanket. The lid is dampened and cannot slam shut. The bed looks simply marvelous, is sturdy, and very well manufactured. A slatted frame is included in the delivery. Fittings are made of metal.

Excellent bed!. Ania. Sidcup, GB. Tue Nov 26 2019

Chic bunk bed with rungs edging, made of solid pine with a milky pine finish. The natural surface is lightly pigmented in white. This pigmentation is in the varnish, which means that the wood grain of the pine is still clearly visible, but no longer as yellowish as with natural pine. The bed with a lying surface of approx. 90 x 200cm can be used universally in the children's room or guest room. A roll-out slatted frame with 15 slats is included. The item is characterized by high-quality workmanship and good stability. The bedposts measure approx. 56 x 56mm, the bedside is approx. 11cm high and the ground clearance is approx. 20cm. The distance from the floor to the top of the bed is 31cm. An inlay depth of approx. 5cm is available for the mattress. The individual rungs in the back and sides are approx. 6cm wide and installed at a distance of approx. 6.9cm. Overall, the bed surround has a height of approx. 68cm. The item is disassembled, with assembly instructions for easy self-assembly. The decoration and the mattress are not included. FSC® certified.

The teepee bunk bed with rungs edging and teepee construction is something special. It combines a full-fledged bed with a playful look. The finish is solid pine, partly natural lacquered, partly white. The bed with a lying surface of approx. 90 x 200cm can be used universally in the children's room. The upper crossbar can still be nicely decorated with textiles. A roll-out slatted frame with 17 slats is included. The item is characterized by high-quality workmanship and good stability. The bedposts measure approx. 60 x 30mm, the bedside is approx. 9cm high and the ground clearance is approx. 20cm. The distance from the floor to the top of the bed is 29cm. An inlay depth of approx. 5cm is available for the mattress. The individual rungs in the back and sides are approx. 6cm wide and installed at a distance of approx. 6.9cm. Overall, the bed surround has a height of approx. 65.5cm and the distance between the border and the 60mm thick upper crossbar is approx. 90.7cm. Required floor space approx. W: 206cm x H: 185.1 x D: 96cm. The item is disassembled, with assembly instructions for easy self-assembly. The decoration and the mattress are not included. The item is not suitable for children under 4 years of age. FSC® certified.

Romantic house bed with bed drawer, from the Amori range with a bed surface in 90 x 200cm. The bed is a real highlight in the children's room and invites you to sleep, dream and play. The bed frame is made of solid pine wood. The sides are elaborately designed like a house facade in a planked look. The heart -shaped cut -outs on the right and left are a nice detail. The sides and roof panels are made of high -quality MDF, painted white. The bed is open at the front and back. A roll -out slatted frame is included. The side height of the bed is approx. 14.5cm, which gives a mattress insertion depth of approx. 8cm and the ground clearance is approx. 20cm. The square bars of the roof structure measure approx. 4.5cm W x 4.5cm D. Three wide struts are built into the roof structure, which provide additional stability. The roof must not be climbed or pulled up. At the front, the roof edge has a height of 122.9cm and rises to a total height of 171.7cm. Bed surface area: 171.7cm H x 213cm W x 98.7cm D In addition, a matching bed drawer with the inner dimensions of approx. 90 x 190cm in partially solid pine is included. The two heart -shaped cut -outs in the bed drawer front are a nice detail and at the same time make it easier to pull out and push in the bed drawer. The roller guide makes the drawer easy to use. The solid wood base plate allows you to use the drawer as additional storage space. The inner height of the bed drawer is approx. 12cm. Max. Load capacity approx. 50kg. Bed drawer storage area: 19.4cm H x 196cm W x 93.9cm D The product is of high quality and sturdy. The fittings are made of metal. The mattress and decoration are not included. The product is disassembled, with assembly instructions for easy self -assembly.

Super schön, sogar noch besser als wir uns vorgestellt haben. Unsere Kleine liebt das Bett. Und optisch einfach unschlagbar. Stefanie. Sehmatal, DE. Fri Jan 12 2024

This junior bed with bed drawer is an ideal interim solution for your child when they are already standing up on their own. Nevertheless, it is protected at night by the horizontal panels of the fall-out protection. Every child will enjoy it and the bed invites you to dream and cuddle. The bed surface is 70 x 140cm. A roll-out slatted frame with 11 slats is included. The body is made of high-quality MDF, painted light grey and very stable due to the 9cm wide feet. The circumferential fall protection has a height from the floor to the top of the panel of approx. 56cm. At the front, it is approx. 48cm high. The entrance to the bed is approx. 50cm wide, with an entrance height of approx. 25cm. Depending on the installation, the entrance can be on the right or the left. The bed has a ground clearance of approx. 16cm. An inlay depth of approx. 5cm is available for the mattress. The practical bed drawer for sliding under the junior bed from Vipack is included. It is made of high-quality MDF, painted light grey. The base plates are made of wood-based material and coated in light grey melamine. The roller guide makes it easy to pull out or push in the drawer. It can be used as additional storage space for blankets or bed linen. It is not suitable as an additional bed surface. The inside dimensions of the drawer are approximately 133.5cm W x 12cm H x 70cm D. The fittings are made of metal and the item is sturdy and high-quality. The product is disassembled and easy to assemble with detailed assembly instructions. The item is not suitable for children under 4 years of age. The mattress and the decorations are not included. The floor space of the junior bed is approximately 148cm W x 60cm H x 76cm D. When the bed drawer is pulled out, the depth is approx. 150cm.

The bunk play bed from the Pino collection is an ideal bed for sleeping, playing, and dreaming. It combines the look of a half-height bed but at a lower-lying height. The bed is easier to reach for both the child and the parents. In addition, it can be used very well under sloping roofs, making better use of the space. It is fully equipped with a roll-up a slatted frame and a ladder. The ladder (approx. 35cm wide) can be mounted on the left or right. The surrounding fall protection, the wide step for safe climbing up and down, as well as the high-quality workmanship and good stability, characterize this article. The bed is not suitable for children under 6 years of age. The decoration, the shelf, and the mattress are not included. The item is disassembled with assembly instructions for easy self-assembly.

This house bed in a country house look, with a lying surface of 90 x 200 cm, is a great place to sleep, play, and dream. The support material of the bed base frame is solid pine lacquered in "Oak-Color". This warm colour forms a pleasant contrast to the white front. This is elaborately designed like a house facade with a planked look. The front, as well as the bedsides and roof panels, are made of high-quality MDF, painted white. The large entrance in the middle is approx. 69 cm wide and 88.5 high. The two windows on the right and left are approx. 35 cm wide and 45 cm high. The upper part of the windows has bars, and the opening below has a height of 27 cm. The bed is open at the head and foot part, as well as to the back. A slatted frame is already included. The height of the bedsides in the front is approx. 16 cm, which means that the mattress can be inserted to a depth of approx. 10 cm and the floor clearance is approx. 20 cm. At the head and foot part, there is an approx. 30 cm high bedside panel. The square bars of the roof construction have a dimension of approx. : W: 4,5 x D: 4,5 cm. The entrance height is approx. 36 cm. The roof is made of MDF and slopes down towards the front. At the back, it has a maximum height of approx. 174 cm, at the front of approx. 125 cm. A nice detail is the rounded edge of the roof at the front. The product has a high-quality finish and the fittings are made of metal. Warning: The roof must not be climbed on. The mattress and decoration are not included. The goods are disassembled, with assembly instructions for easy self-assembly. Footprint approx.: W: 214.2 x H: 174 x D: 105.3/191 (bed drawer extended) cm. The bed drawer with an inner dimension of approx. 90 x 190 cm is included in the delivery. The material is high-quality MDF lacquered white. The front of the bed drawer is smooth. The two-handle recesses are a nice detail and make it easier to pull out and push in at the same time. The roller pull-out makes the drawer easy to use. The internal height of the bed drawer is approx. 12 cm. The continuous base plate is decor-coated and allows the drawer to be used as additional storage space. The external dimensions of the bed drawer are approx.: W: 198.5 x H: 18.5 x D: 94 cm. The decoration, bed linen, and mattress are not included. The article is delivered disassembled, with assembly instructions for easy self-assembly.

Wunderschönes und gemütliches Bett für Kinder. Sehr gute Qualität. Hier kann man sich nur wohlfühlen.. Julia. Recklinghausen, DE. Mon Jan 10 2022

This furniture set consists of one fabulous single four-poster bed. The bed has a lying surface of 90 x 200cm, with curved head and footboards and stable bedposts. It is made of high-quality MDF, and the surface has a white lacquer. The heart-shaped cut-outs on the head and footboards are a nice touch. The bedposts for the curtains are included in the delivery. The dimensions of the upper mounting bracket for the curtain are 3cm H x 6cm W. A slatted frame is included in the delivery. The insert depth for the slatted frame and mattress is approximately 10cm. There is space under the bed. All fittings are made of metal. The product comes unassembled and is easy to build using the included instructions. Dimensions: 187cm H x 96cm W x 211cm L. There is a beautiful fabric set that is white and pink which can be used for curtains. It includes four single curtains (each 200cm H x 105cm W) which can be gathered together around the bedposts. It can be mounted on the upper post. The fabric consists of 100% polyester, and can not be washed. In addition to the bed, there is a matching drawer, which has dimensions of 90 x 200cm. It is made of high-quality, white lacquered MDF. The two heart-shaped cut-outs in the bedsides are a nice touch and facilitate the simultaneous opening and closing of the drawer. The casters enable smooth operation of the drawer. The solid base means that the drawer can be used for additional storage space. The interior height of the bed drawer is approx. 12.5cm. The product comes unassembled and is easy to build using the included instructions.

Dieses Himmelbett ist der Hammer meine Tochter ist so glücklich ich würde nochmals kaufen. Laura. Oberhausen, DE. Sat Jul 07 2018

This is a beautiful single bed from the Erik collection, with a lying surface of 90 x 200cm, with a simple head and footboard, and stable bed posts. The head and footboard are made of solid pine wood, the sides of the bed are made of high-quality MDF, and the surfaces have a white lacquer. The middle part of the head and footboard has a plank-look, giving it a wonderful country house style. The headboard is about 77cm high and the footboard is approximately 48cm high. A slatted frame is included in the delivery. The inlay depth for the mattress is approximately 6cm. There is about 20cm of space under the bed between the floor and the bed. The matress and the decoration is not included. All fittings are made of metal. The product comes unassembled and is easy to build using the included instructions The floor space required is 77cm H x 207cm W x 96cm D.

Single bed with bedside table and fall protection as a set from the Kiddy series, with rounded head and footboard. The material is high -quality MDF and the surface is painted white. The bed surface is 90 x 200cm and a slatted frame with 13 slats is already included. With the slanted feet made of natural solid pine, the retro look is underlined. The headboard is approx. 72cm high and the footboard is approx. 54cm high. The inlay depth for the slatted frame and mattress is approx. 9cm. The bed is open at the bottom and the ground clearance is approx. 21cm. Bed surface area: 72cm H x 206cm W x 95cm D You can also mount a side guard. The material is high -quality MDF and the surface is painted white. It is mounted on the side of the bed and can be mounted on the right or left. The fall protection provides additional safety from falling out of bed. Fall protection dimensions: Approx. 91cm H x 25cm W x 6cm D A bedside table with 1 revolving door is part of the set. The material is high -quality MDF and the surface is painted white. All edges are rounded. The distance between the body and the top door is such that you can open the door by reaching in. There is a large, spacious compartment behind the door. The interior dimensions of the compartment are approximately: 36cm W x 31cm H x 33cm D. Bedside table dimensions: Approx. 40cm H x 41cm W x 36cm D The mattress and decoration are not included. The product is disassembled, with assembly instructions for easy self -assembly.

This canopy bed comes with a fabric canopy, and combines a straightforward bed design with a Mediterranean style. It's a great place for sleeping and dreaming. It's European single size, and includes a slatted frame and poles for the canopy. The base is made of solid pine wood, painted white. The bed's sturdy construction, with 6 x 6cm-thick posts, and high-quality workmanship are particularly great features. The canopy frame is 4 x 4cm thick, and can be decorated with a fabric canopy. The fabric panel measures approximately 85cm W x 205cm D, and covers the area from front to back, overhanging at the front. It's made of 100% polyester fabric, and can be washed at 30°C. The headboard is approximately 87cm tall. The recess for the mattress is approximately 7cm deep, and the bed has a floor clearance of approximately 26cm. The mattress and accessories are not included. The product requires self-assembly, using the simple assembly instructions included. It measures approximately 191cm H x 208cm W x 98cm D. The bed has been FSC certified.

The over all effect is exactly as the picture depicts I just feel it’s simplicity and quality doe not justify the cost. I had seen some that looked the same but were much cheaper but I thought paying more would make it have a quality feel. This isn’t the case. It’s ok!. Olivia. Hurworth Darlington, GB. Wed Oct 21 2020

This bed is ideally suited for small and bigger children as it can be extended to accommodate your growing child's needs. The slatted frame is included in the scope of delivery and can be extended to the desired lengths. The material thickness of the bed guarantees good stability and durability. The bed drawer and mattress are not included. The product is delivered disassembled with assembly instructions for easy assembly.

Get your little ones racing to get ready for bed with this car-themed frame, brilliant for updating any room.

great quality as shown in the picture very pleased. Aysha. Ashley Heath Ringwood, . Sat Sep 26 2015

The teepee bunk bed with bar edging and teepee construction is something special. The bed drawer is included. It combines a full-fledged bed with a playful look and storage space function. The finish is solid pine, partly natural lacquered, and partly white lacquered. The bed with a lying surface of approx. 90 x 200cm can be used universally in the children's room. The upper crossbar can still be nicely decorated with textiles. A roll-out slatted frame with 17 slats is included. The item is characterized by high-quality workmanship and good stability. The bedposts measure approx. 60 x 30mm, the bedside is approx. 9cm high. The distance from the floor to the top of the bed is 29cm. An inlay depth of approx. 5cm is available for the mattress. The individual rungs in the back and sides are approx. 6cm wide and installed at a distance of approx. 6.9cm. Overall, the bed surround has a height of approx. 65.5cm and the distance between the border and the 60mm thick upper crossbar is approx. 90.7cm. The bed drawer offers additional storage space for blankets or bed linen. The front and sides are made of natural, solid pine wood. It has internal dimensions of approx. 194cm W x 17cm H x 90cm D. The base plates are coated throughout and decorated. It is also suitable for a 90 x 190cm mattress, with a maximum mattress height of 17cm. Thanks to the roller guide and the two handle recesses in the front, it can be easily pulled out and pushed in. The product is of high quality and sturdy. The fittings are made of metal. Required floor space approx. W: 206cm x H: 185.1cm x D: 96cm. When the bed drawer is pulled out, the depth is approx. 190cm. The item is disassembled, with assembly instructions for easy self-assembly. The decoration and the mattress are not included. The item is not suitable for children under 4 years of age. FSC® certified.

hatte mir mehr erwartet. Maria. Freienhagen, DE. Sun Jul 28 2024

Article set MODULO consists of two single and stacking beds. They combine smart design and space-saving solutions. These two beds offer you the comfort of a single bed for the children's room or guest room. It is designed so that two beds can be placed on top of each other. Ideal for small spaces. The single bed has a lying surface of 90 x 200 cm and the slatted frame is already included (16 slats approx. 70 mm wide with 56 mm spacing). The support material is 1.8 cm thick and 16 cm bed sides made of high-quality MDF, painted grey. The corners of the bed sides are rounded. The interesting foot form in arrow optics, sets optical accents with the bed. The feet are made of 20mm thick, solid pine and natural lacquered. They are worked in such a way that they interlock when the beds are stacked. Whether used individually or stacked, they always provide the bed with a high level of stability and sturdiness. The bed is also ideal for use under sloping ceilings. It has a total height of approx. 27.5 cm from the floor to the upper edge of the bed side. The floor clearance is approx. 11.5 cm, the insertion depth for the mattress approx. 11 cm, with a max. mattress height of approx. 18 cm. The delivery includes 2 beds, the decoration and mattress is not included. The article is stable and of high quality. The product is disassembled for easy self-assembly. Footprint approx: W: 203.6 x H: 27.5 x D: 93.8 cm. Stacked, the height of the two beds is approx. 55 cm.