The chair is comfortable enough. However I have to make comments on the welding quality of the metal parts. There appears to be a good deal of spattering not cleaned up from the welds on the arm rests. These are chrome plated over, and what remains could catch on clothing: can't remove the burrs as this will remove the chrome plating. Burrs on the screws under the arm rests need cleaning up. With regard to the arm rests, the welding of the main metal part to the mounting tubes at either end caused some fitting problems. The weld on one arm end had spilled over to the inside of the tube, and it was impossible to mount the arm rest. This was solved with taking the previously attached arm rest and swapping them over. Quality control could be a lot better.