Ovington Unfinished Floating TV Stand for TVs up to 75"

This is quite nice, however, some things are not quite what they seem. This was bought to fit a specific depth of 32cm so that it didn't protrude. It's listed as being 32cm but in actual fact it's 33cm. It's listed as having cable management. It has two holes in the back that have nowhere to go to. Hardly what could be called cable management. The cables for the lighting system are long and not provided with any means of routing or control. I ended up drilling two holes in the underside to route cables to the socket below. The cables I had to tape in place all along the inside. The lights are nothing like as shown in the listing. They show up as four short strips, not a continuous strip. See my picture. Mounting on wall can be an issue. It mounts on hooks ideally on a solid masonry wall. No mention of spacing on listing. They are at 1750mm between ends and the middle one at 860mm from left hook. If mounting on stud wall, positioning is quite specific or you will need a specific mounting device as mentioned by other reviewer. It takes quite a lot of work to assemble, wire and mount. Not for the amateur. Still like it though

Unit looks decent buy not sure it's worth the money considering you have to assemble yourself. Also if mounting onto a plasterboard wall you will need to buy a 2m hafele cabinet bracket at around £20 and cut it down to 1.8m so you can screw it into the studs (when you've found them lol) otherwise it isn't staying on the wall long!

Top Schrank! Sieht toll aus !

Sieht gut aus.