Termera Reversible Corner TV Stand for TVs up to 60" with Storage Cabinet, 2 Open Shelves

The TV stand and entertainment centre are designed to make the most of awkward corner spaces. Its modern style and curved edges make it an ideal addition to any living room. With its 18 mm thick particleboard and melamine veneer finish, it can accommodate TVs up to 60" and offers two wide open shelves for storage and two closed shelves for added privacy. Reversible - Left or right corner assembly: The TV stand can be built in the right or left corner. First, assemble the body (excluding 2 doors) in the right corner according to the assembly manual. Rotate the TV stand 180 degrees and put it in the left corner. Attach the doors accordingly. Note that the handles should be positioned on the upper part of the door in both corners. If the door handle's position is not important to you, just rotate (turn) the right-corner assembled TV stand 180 degrees to the left and place it in the left corner. Note: If you choose to use the TV stand in the left corner by inverting the right-corner assembly, please be aware that 8 screw heads may become visible, as the bottom panel is secured to the upper section with screws. In this case, gently tighten the screws further to ensure they sit flush with or slightly below the surface. Then, use the included wood-patterned stickers to cover the screw heads and maintain a clean, seamless appearance. Material: the TV stand is made of an 18 mm thick high-quality melamine-coated particleboard. The manufactured wood surface is water-resistant to some extent and the edges are banded with PVC edge banding tape. First-class assembly/installation hardware and accessories are used. Our products are produced from certified quality raw materials that do not contain carcinogenic substances and comply with European Union health norms. Cleaning: You can clean your furniture with a dry cloth. Avoid prolonged contact with your product with moisture and water. Assembly: The product will be delivered to the customer in the original package as disassembled. It is designed to be assembled by the customer using a power drill and screwdriver. Assembly instructions and installation hardware are included in the package. For fast and error-free installation, product parts are numbered with stickers following the assembly guide.