Actually love these drawers! I warn you that they are a bit fiddly to put together and because they’re asymmetrical you need to be the sides on the right way up which wasn’t obvious to me until I tried to slide the drawers in at the end

Assembly tricks… first off this is really cute once it’s assembled. I’ve assembled a lot of furniture. I appreciate that the pieces were labeled. I’ll add a pic of the pieces before and after. It took exactly 2 hours to assemble. You will read that the little wooden dowels that keep the drawers from sliding out need to be flush with the panel. Don’t do that. If they are flush then the drawer is nearly impossible to open and makes a loud noise. I was able to get a file in there to give some wiggle room and shave the dowel down to be able to open. Which brings me to my second tip. I waited until the end to mail the cardboard backing on. It made it easier to work from all angles. Happy with this and would buy again.

Great easy to build, a drill might make it easier cause my hands are tired some screws were tough to get in

The assembly for the product was pretty simple. I would recommend using a drill on low setting to not break the wood because some of the areas were almost impossible to screw with a screwdriver. 

Easy to put together. First time me took about an hour, (I put something on upside down and had to redo it) the second one took about 40 minutes. All wood except back and drawer bottom. I do suggest waiting to put the back on until last. It makes it easier to put the drawer supports on in the inside of the stand. I took a star away because the color is waaayyy darker than in the picture. Not sure if they sent the wrong color or it’s just darker than in the picture on Wayfair.