Cord & Faux Leather Chair & Sofa Covers

Compound polyurethane waterproof leather with polyester spandex base cloth to form water repellent dustproof surface layer and comfortable touching texture. Limit applicable seat cushion size to length 36 cm X 48 cm, width 36 cm X 48 cm, thickness 3 cm X 6 cm, match the measured cushion dimension to guarantee tight fitting effect. Combine high elasticity tying ropes and fixed buttons to finish rapid installation, block coffee overflow, food residue and daily dust from contaminating chair surfaces. Conduct daily maintenance by wiping stained areas with damp cloth, avoid long term direct sunlight exposure, prohibit bleaching and high temperature ironing operations. Deploy the seat covers in home kitchens, dining halls, commercial restaurants and wedding event sites to realize low cost furniture protection and space beautification.

Manufacture high back chair slipcover from stretch velvet fabric, present soft texture, good air permeability and anti crease property after long time placement. Embed built-in elastic strips to fix the cover on chair surfaces tightly, support quick mounting and detachment to adjust indoor decoration style freely. Set applicable high back chair dimension as back height 60 cm X 75 cm, back width 35 cm X 48 cm, seat length 38 cm X 48 cm, seat width 35 cm X 48 cm, front cushion thickness 4 cm X 14 cm, back cushion thickness 18 cm X 28 cm, back thickness 5 cm X 8 cm. Isolate chair from stains, abrasion and pet scratches to refresh old furniture and avoid frequent chair replacement expenditure. Execute washing operation below 30 degree Celsius, do not use bleach, hang to dry without shrinkage phenomenon, low temperature drying and reverse ironing are permitted.

Mix polyester fiber and spandex into PU coated stretch fabric to achieve thickened structure, soft hand feel and natural wrinkle resistant performance. Set adaptive chair measurement as back height 52 cm X 60 cm, back width 40 cm X 45 cm, seat length 40 cm X 48 cm, seat width 42 cm X 46 cm, cushion thickness 5 cm X 10 cm. Attach hidden elastic bands inside fabric edges to fix the cover firmly on chair frames and simplify disassembly and reinstallation processes. Utilize PU waterproof coating to block liquid penetration, wipe residual drinks and dirt quickly with damp cloth for daily stain removal. Restrict washing rules under 30 degree Celsius water temperature, ban bleaching and ironing, forbid long time sunlight exposure to prevent coating peeling.

Utilize elastic velvet fabric to craft high back chair protective covers, feature soft touch, breathable structure and anti wrinkle effect after long term use. Install inner hidden elastic bands to make the cover fit chair outline closely, simplify installation steps and support rapid disassembly for washing and replacement. Match high back armless chairs with back height 60 cm X 75 cm, back width 35 cm X 48 cm, seat length 38 cm X 48 cm, seat width 35 cm X 48 cm, front cushion thickness 4 cm X 14 cm, back cushion thickness 18 cm X 28 cm, back thickness 5 cm X 8 cm. Protect chair surfaces from liquid stains, hard scratches and pet tearing damage, renew outdated chair look and extend furniture service time significantly. Restrict washing temperature below 30 degree Celsius, ban bleach usage, air dry naturally with no shrinkage, low heat tumble drying and reverse side ironing are acceptable.

Recliner slipcovers will protect your recliner chair from dirt and stains. This recliner cover will give you extreme cooling when you sit on it, and with the use of non-slip technology fabric on the back, no more worries about slipping on both fabric and leather recliner chairs.

Best fitting cover for recliner!! Love it!. Anonymous. Thu Jan 02 2025