Happy with the finished product although construction is not for the faint-hearted. It says it requires three people to assemble it however I managed 95% of it on my own and with a bit of planning, a second person is useful when it comes to manouvering the two halves around the room. I managed to construct the double bed version entirely in a room which is only 13ft by 8ft. The hardest part is following the instructions, they are not particularly clear in places and the "magnified" bits could do with being 2x larger. One step is particularly baffling where it expects you to screw a large nut in at either side but doesn't explain that you do it from the opposite side (well I did anyway because it was impossible to do it any other way). Some of the wooden holes didn't line up perfectly with the metal frame so I had to enlarge them slightly with a drill. Also some of the screws are already screwed into the pieces rather than being in the bags so you can be hunting around for things which are hiding in plain sight.
Once constructed and in place the bed feels solid, the mechanism works well, in fact the springs are so powerful that until you get the bed flat it feels like it would catapult shut if you get go of it! The straps which hold the mattress in place seem like a bit of an afterthought, there are no pre-drilled holes to fix them in place and you just basically screw them to the wood, it'd look nicer using steel screw cup washers.. Anonymous. Gainsborough, GB. Wed Aug 19 2020
