Polycarbonate Roofing Sheets UV Protected 1MM Sunshine Room Panel 250CM*61CM

Features

• This is a 1mm thick PC sunlight panel with 61CM width × 2.5M length, which can directly adapt to scenarios such as small rain shelters and DIY greenhouses.
• This is a 1mm thick PC sunlight panel with 61CM width × 2.5M length, which can directly adapt to scenarios such as small rain shelters and DIY greenhouses.
• Produced from high-quality polycarbonate raw material, its maximum light transmittance can reach 89%, comparable to glass. The single-side co-extruded UV coating can block ultraviolet rays, it is not easy to yellow and age for long-term outdoor use, and the light transmittance loss is only about 6% after ten years
• Produced from high-quality polycarbonate raw material, its maximum light transmittance can reach 89%, comparable to glass. The single-side co-extruded UV coating can block ultraviolet rays, it is not easy to yellow and age for long-term outdoor use, and the light transmittance loss is only about 6% after ten years
• Its impact strength is 250-300 times that of ordinary glass and 30 times that of acrylic plate with the same thickness. It is not easy to break with no splashing risk, and its weight is only half of glass, which reduces the cost of installation and frame bearing
• Its impact strength is 250-300 times that of ordinary glass and 30 times that of acrylic plate with the same thickness. It is not easy to break with no splashing risk, and its weight is only half of glass, which reduces the cost of installation and frame bearing
• It can keep stable physical properties in the temperature range of -40℃ to 120℃, its flame retardant grade reaches B1, self-extinguishes after leaving fire and does not produce toxic gas, which is suitable for many scenarios such as outdoor rain shelter, greenhouse flower house, equipment cover, channel lighting
• It can keep stable physical properties in the temperature range of -40℃ to 120℃, its flame retardant grade reaches B1, self-extinguishes after leaving fire and does not produce toxic gas, which is suitable for many scenarios such as outdoor rain shelter, greenhouse flower house, equipment cover, channel lighting
• It supports on-site cold bending installation, the minimum bending radius is 175 times of the plate thickness, which adapts to arched and arc shapes. It has been cut neatly as required before leaving the factory, with smooth edge treatment, and can be installed directly after reserving space for thermal expansion and contraction
• It supports on-site cold bending installation, the minimum bending radius is 175 times of the plate thickness, which adapts to arched and arc shapes. It has been cut neatly as required before leaving the factory, with smooth edge treatment, and can be installed directly after reserving space for thermal expansion and contraction