This is for a pair of scroll-patterned driveway gates. They are lighter-duty but do not compromise build quality. Note: The listed sizes fit a total post-to-post gap, the hinge and latch gaps are already accounted for. The physical width of the gates is less than the listed width, see images for exact sizes. There is no adjustment on these gate hinges so the total GAP must be as per the listed sizes. If the gap does not suit then run timber down one or both sides to suitably close the gap down. Frame height is 812mm and 914mm overall height to the top of scrolls. Electro-galvanized for added rust resistance and powder-coated black, the finish must be inspected and any chips touched up. The galvanizing is not a 100% rustproof guarantee. Like any outdoor metal product, it may need to be painted every couple of years to ensure a long life. Moving parts will need to be touched up regularly. It comes with angle brackets, bolts, a rocker latch, and drop bolts, but no screws. Nuts and bolts must be painted after fitting to prevent the onset of rust. Made from solid metal frames 25mm x 6mm and infill bars 10mm diameter. Search Wayfair for optional Lepine 70mm square x 1400mm long concrete-in metal posts that are available to purchase.