Metal Rust Resistant Lawn Edging

This metal lawn edging not only creates a distinct edge to a grassed area but also gives gardens a clean, modern look. Easy to put in place, it can be used to edge lawns (the flexibility enables curves to be catered for), give paths definition or even used to create raised beds. Easy to clip to size with metal snips, the rolls are 5m long and 16.5cm high, and come with rolled top safety edges. Made from galvanised steel, the edging can be installed using a rubber mallet or similar to gently put in place.

Wrong size given on website but very quick return method and refund given.. Anonymous. Tue Sep 10 2024

This product is a decorative garden fence mainly made of galvanised wire and PVC coated wire. It is made by inserting corrugated vertical wires through double twisted horizontal wires. Bend vertical wire forms an arched edge on top, supplying the fence sufficient stability and strength.

This set of 20 lawn edging panels link together to make an attractive perimeter for the lawn or a flower border. Each 45cm section interlocks for stability and is made from strong, black coated wire for long-lasting service. The spiked feet are simply pushed into the ground for quick and easy installation. The feet are roughly 14cm in length, meaning that the panel sits about 27cm above ground.

Swift Edge garden edging helps you create well-defined and attractive edges for your garden’s lawns, borders, pathways, or driveways. Conceived by professional landscape architects and made from extruded aircraft-grade aluminum, Swift Edge has been designed to give a ‘just finished’ pristine edge that creates a clean divide between soil, grass, mulch, gravel, and aggregate.

Simpler than I expected and it fitted very well. Kay. GB. Fri Jul 10 2020

This set of 10 lawn edging panels link together to make an attractive perimeter for the lawn or a flower border. Each 45cm section interlocks for stability and is made from strong, black coated wire for long-lasting service. The spiked feet are simply pushed into the ground for quick and easy installation. The feet are roughly 14cm in length, meaning that the panel sits about 27cm above ground.

This fencing looks great and is strong and sturdy.. Sally. Scarborough, GB. Wed Mar 25 2026

This set of 5 lawn edging panels link together to make an attractive perimeter for the lawn or a flower border. Each 45cm section interlocks for stability and is made from strong, black coated wire for long-lasting service. The spiked feet are simply pushed into the ground for quick and easy installation. The feet are roughly 14cm in length, meaning that the panel sits about 27cm above ground.

Have re 3ntly moved to a proverly with large beds spiiking over the pathway. Needed small solid railings to edge the pathway and protect the plants until they have flowered and can be moved further back fro the past for next year. Was ,jttle unsure of strength of these railings, however very pleasantly surprised, very strong. Clip together easily and provide and attractive edging to pathway. Very good value for money, will but again. Quick delivery snd quality packaging.. Chris. Wiltshire. Tue Jun 02 2026

Heavy Duty Metal Circular Border Edging offers a practical and stylish solution for defining perfect circles around tree pits, shrubs and lawn features. Edges will be much easier to maintain, keeping that crisp finish that makes your garden look top notch! Heavy Duty Metal Circular Border Edging also helps to prevent grass and weeds from encroaching, reducing the competition for nutrients and water that can have a negative impact on tree/shrub establishment and growth. Crafted from high-grade, hot-dipped steel, it boasts a durable, rust-resistant, maintenance-free design with a choice of weathered Cor-ten steel or black powder-coated finish to complement any landscape. Easy to install, it helps maintain tidy, well-defined beds with minimal effort. Specification: 90cm diameter with 15 ground spikes. Comes in 3 parts with all screws, nuts and washers included Height of Border: 80mm Height of spike: 80mm Material: High-grade, hot-dipped steel Choice of two finishes Rust-effect, Cor-ten Weathered Steel Black powder-coated steel Installation Instructions: Mark out the area where the circular border is to be installed. Lightly water the area and remove the turf from the marked area. Place the ring into position around the tree. Use the supplied screws, nuts and washers to securely fasten the edging together. Use a mallet and a wood block to carefully hammer the spikes into the ground and ensure the border is secure

Heavy Duty Metal Circular Border Edging offers a practical and stylish solution for defining perfect circles around tree pits, shrubs and lawn features. Edges will be much easier to maintain, keeping that crisp finish that makes your garden look top notch! Heavy Duty Metal Circular Border Edging also helps to prevent grass and weeds from encroaching, reducing the competition for nutrients and water that can have a negative impact on tree/shrub establishment and growth. Crafted from high-grade, hot-dipped steel, it boasts a durable, rust-resistant, maintenance-free design with a choice of weathered Cor-ten steel or black powder-coated finish to complement any landscape. Easy to install, it helps maintain tidy, well-defined beds with minimal effort. Specification: 60cm diameter with 10 ground spikes. Comes in 2 parts with all screws, nuts and washers included Height of Border: 80mm Height of spike: 80mm Material: High-grade, hot-dipped steel Choice of two finishes Rust-effect, Cor-ten Weathered Steel powder-coated steel Installation Instructions: Mark out the area where the circular border is to be installed. Lightly water the area and remove the turf from the marked area. Place the ring into position around the tree. Use the supplied screws, nuts and washers to securely fasten the edging together. Use a mallet and a wood block to carefully hammer the spikes into the ground and ensure the border is secure

This product is mainly used as protected fencing for high way, railway, a bridge on the two sides. Used as safeguarding for airport, port and dock. In the municipal facilities, Holland wire mesh is widely used for the separation and protection of park, lawn, zoo, lake, road and residential zone. Protection and decoration of hotel, supermarket, entertainment venues. Separation fence for developing zone, court areas, refuse landfill, test site, sports, animal cultivation.

This set of 20 lawn edging panels link together to make an attractive perimeter for the lawn or a flower border. Featuring an attractive bar bow top style arch within an arch design, each 45cm section interlocks for stability and is made from strong, black coated wire for long-lasting service. The spiked feet are simply pushed into the ground for quick and easy installation. The feet are roughly 14cm in length, meaning that the panel sits about 27cm above ground.

This set of 10 lawn edging panels link together to make an attractive perimeter for the lawn or a flower border. Featuring an attractive bar bow top style arch within an arch design, each 45cm section interlocks for stability and is made from strong, black coated wire for long-lasting service. The spiked feet are simply pushed into the ground for quick and easy installation. The feet are roughly 14cm in length, meaning that the panel sits about 27cm above ground.

This set of 5 lawn edging panels link together to make an attractive perimeter for the lawn or a flower border. Featuring an attractive bar bow top style arch within an arch design, each 45cm section interlocks for stability and is made from strong, black coated wire for long-lasting service. The spiked feet are simply pushed into the ground for quick and easy installation. The feet are roughly 14cm in length, meaning that the panel sits about 27cm above ground.