No Dig Lawn Edging

This set of 20 lawn edging panels link together to make an attractive perimeter for the lawn or a flower border. Each 45cm section interlocks for stability and is made from strong, black coated wire for long-lasting service. The spiked feet are simply pushed into the ground for quick and easy installation. The feet are roughly 14cm in length, meaning that the panel sits about 27cm above ground.

Timber suits a cottage border better than metal, and this grey four piece set keeps things low at 28cm high across a 243cm span. Each panel is listed at 64.5cm long and 1.5cm thick, sturdy enough to hold a line yet slight enough that bedding plants still show above it. A protective varnish seals the wood against rain and dew through the seasons. Connecting anchors join one panel to the next, letting the border follow a straight lawn edge or ease around a curved bed. Nothing needs digging in, so a whole run goes down in an afternoon and lifts again for mowing.

Brown timber softens a border in a way that painted metal cannot, and this pack of twelve fir pieces gives a flowerbed a natural rim. Every piece runs 60cm long by 34cm high at just 1cm thick, slim enough to tuck close against planting without stealing space. The wood carries a protective treatment coating for life outdoors. Because the pieces are not fixed to one another, a bed edged this spring can become a square herb box or a circle round a shrub next year. Each pointed stake goes 10cm into the soil under hand pressure and comes back out just as readily.