Today, sustainability is no longer just an issue for "green romantics", but a question of the future for our society. We take on this responsibility and only produce home textiles for our brand "HOME in green" that are manufactured according to sustainable principles. The MANDOSA sliding curtain from "Home in green" enchants every window into a real focal point. Starting with the base material: The so -called "bamboo look" is an easy to clean, semi -transparent fabric made of polyester (with 91% recycled content according to the Global Recycled Standard) with approx. 8mm wide horizontal stripes. The transparent and opaque areas in the base fabric conjure up a magical play of light and shadow in your ambience. The bamboo look provides you with good privacy, while still allowing sufficient daylight into your rooms. The fabric weighs approximately 110g per square meter. The clean and straight look of sliding curtains is also clear from the laser -cut sides: The fabric of the panel was cut using a complex laser cutting process (laser cut) and fixed in such a way that the side edge does not pull threads even after household washing. Thanks to the so -called laser cut, the sliding curtain can be easily cut to any desired height - and easily in your own home. The individual steps can be found in our description videos or in the assembly instructions included in delivery. Speaking of delivery: The "Home in green" sliding curtain is delivered with a white panel carrier to which the fabric has been attached. The panel trolley is suitable for all standard curtain rails. Depending on which rail you use, curtain rolls or X-gliders can be used on the panel trolley. So if the already attached wheels do not fit into your rail, you can easily replace them with the enclosed X-gliders. In order to move several "HOME in green" panels in a multi -run curtain rail at the same time, so -called "carriers" are also included. These can be attached to the side of the panel trolley to move all the decorated panel curtains at the same time. A high -quality clamping bar made of anodised aluminum is attached to the lower end of the fabric panel, which serves as a weighting element. The panel carrier and aluminum clamping strip are already attached to the fabric and can be easily removed and fixed again at any time (e.g. to shorten or wash the fabric). And it would not be "HOME in green" without the theme of sustainability: The sliding curtains from "HOME in green" are made of 91% recycled polyester and 9% conventional polyester and are certified according to the Global Recycle Standard (GRS). The recycled yarn from post-consumer recycled materials (e.g. from household waste, beverage bottles, etc.) has the same textile character as conventional polyester with the same care properties. The sliding curtain is produced in production facilities in Europe that have been audited according to the GRS standard. In this way, we proactively avoid long transport routes for the benefit of our environment. To protect the sliding curtain, it is packed in a recycled poly bag, which can be recycled after disposal. This simple and timeless plain sliding curtain can be ideally combined with the digitally printed "HOME in green" sliding curtains.
