Simple, but never boring - the s.luce ring wall light cuts a fine figure everywhere! No frills, but uncompromisingly straightforward. The housing in lacquered aluminium fits into any environment, whether commercial or private. Inside the lamp sits a warm white, powerful LED module, which is quite light-intensive despite indirect radiation. The circular segment, which is mounted on the wall, gives the impression that the ring continues to run in the wall. The lamp is available in two sizes and in two colours. The range is completed by the s.luce ring pendant and ceiling light, which can also be mounted on the wall, making them an attractive focal point. The once-ring wall light can be dimmed via phase cut-off or phase cut-off. Since it is a high-voltage LED, there may be slight flickering in the lower dimming range. We recommend the Eltako DTD55-230V-wg or Eltako EUD12NPN-UC for electrical distribution on a DIN rail or Eltako EUD61NPN-UC for use in a deep flush-mounted box. As a touch dimmer, we recommend the Gira 238500 dimmer. The installation of the ring wall light must be carried out by a professional. Only a 3 x 1.5mm² supply line is feasible. 5 x 1.5mm² or looping through is not possible.
or
18+, T&C apply, Credit subject to status.
