Ladson Steel Motion Sensor and Odour Seal Kitchen Rubbish Bin

Features

• Please find a troubleshooting list regarding the sensor bins. Issues with sensor bins can be caused by a variety of factors so please can I ask you to check the following: Please ensure that the clear film has been removed from the sensor area. Please ensure that the batteries used are of a quality brand and are in place securely inside of the compartment. If these are inserted incorrectly or are loose this can cause problems with the function of the bin. Please ensure that the product is turned on with the main switch on the back of the lid. When the product is switched on correctly please wait approximately 10 seconds before trying to use it. If the bin lid is working correctly, the red light should flash every 7-10 seconds. If you still are experiencing issues with your product, please remove the batteries for 24 hours to allow the system to completely reset. This normally will resolve most problems with the sensor unit on the bin. We recommend that the batteries are removed for 24 hours to ensure that the charge from the batteries which is stored in the microchip is completely depleted. This is so that the sensor can be restored to factory settings. Note: The lid will not work with sudden movements, the sensors are designed to operate with slow assured movements.
• The batteries on all bin sizes and colours are not included
• Item is battery operated. Requires 4 x D batteries