Built-In Ladder Vipack Children's Beds

The build took a couple of hours but had very clear instructions. My 5 year old daughter absolutely loves it. We have added LED lights to the den below and she thinks it is amazing. We still need to add some curtains but i felt that the set you could purchase were too expensive. It feels very sturdy and safe. My 2 year old can even get up and down the ladder easily thanks to the handles at the top.. Jordan. Innerleithen, GB. Thu Aug 27 2020

This mid-sleeper bed is the perfect place for both playing and sleeping, made of solid pine wood. The decorative fabric set featuring a spring design is included. The light tone of the fabric fits in wonderfully with the floral pattern. The front curtain has an open entranceway which is covered by a flap that can easily be rolled up. The fabric in this set is made of 100% cotton and can be machine-washed at 30°C. The space underneath the bed is the perfect play area or it can be used as practical storage space. The ladder can be mounted on the left or right. The surrounding bed rails, wide ladder rungs for safely climbing up and down, and the high-quality workmanship along with the stable construction all make this bed stand out.

The bed was really good and the little one loved it. The bed is well made, stable, easy to put together (only took a few hours to put together). Being a mid-sleeper the space under the bed (in terms of height) is limited, so it's quite easy for the little ones to bump their heads. The only real thing that I disliked was the fact that the base of the slide is made from some sort of cardboard like material. There are pieces of wood under the base of the slide to add support, but in places where the base of the slide does not have support directly underneath, it feels more flimsy than I would like. Otherwise, I really like the product. A couple of minor points that I would like to mention. These may have just been one off incidents that impacted me directly, rather than being inherent issues with ordering the product. 1. The bed arrived late (delayed by a month) 2. The build instructions identified the individual pieces using numbers, but the actual pieces of the bed were not numbered. However, working out what went where, was not too hard.. Mustafa. Blackburn, GB. Wed Aug 25 2021

Very good and solid .not complicated at all. Anonymous. Croydon, GB. Mon Jun 22 2020

This bunk bed with 2 beds for the children's room. It is made from solid pine. The ladder and 2 roller slatted frames are included. The upper-lying surface has all-around fall protection. The ladder can be mounted on the left and right. The bunk bed can be converted into 2 single beds if required as the posts are divided. Wide steps ensure safe ascent and descent. The bed is of high quality and is characterized by very good stability. The practical bed drawer on wheels, from the Pino range, for sliding under the Pino single bed, is also included in the scope of delivery. The bed is made from solid, lacquered pine and comes with a base plate on which the mattress is placed. A mattress itself is not included. Thanks to the roller guide, it can be easily pulled out and pushed in. Not suitable for children under 6 years. The goods are disassembled for easy self-assembly. FSC®-certified and EN 747-2:2012+A1(2015) certified.

Really nice set of bunk beds. Stylish & easy to assemble.. Suzanne. London, GB. Sun May 02 2021

A wonderful mid-sleeper bed made of solid pine wood with a slide for sleeping and playing. The slide adds some fun to playtime - an adventure play space for every child's room. The fabric curtain, with wonderful domino designs, is included in the delivery. The fabric is made of 100% polyester and is washable at 30°C. The slatted bed frame is also included in the delivery. The ladder and slide can be installed on either the left or right side. The surrounding bedside rails, the wide ladder steps for safe ascending and descending, the high-quality finish, and good stability are all notable features of this bed. The space under the bed can be used for playing or as an additional storage space. This product is delivered unassembled and comes with assembly instructions for easy self-assembly. FSC and EN 747-2:2012+A1(2015) certified.

My wee boy loves it great bed took me a while to build was bymyself instructions gd glad we got it thank u. Lisa. Dumbarton, GB. Thu Jul 30 2020

This practical, Pino European Single Bunk Bed with Drawers is made of solid pine wood and is ideal for the children's room. The top bunk features a surrounding rail for extra security, while the ladder has wide steps for safe ascending and descending. The ladder can be mounted on either the left or right side. Two additional under-bed drawers are also included in the delivery and offer plenty of storage space. If needed, the bunk bed can be dismantled into two single beds as the posts are separable. This bed is manufactured to a high quality and is characterised by its robustness. Not suitable for children under 6 years of age. This bed comes in two pieces with assembly instructions for easy self-assembly.

I ordered two of these bunk beds for my daughters. They have been using it for a year and it is still sturdy and strong like day 1, we hear no noise of any loose screws or sweeks. My daughters are satisfied with the quality and get comfortable good nights sleep.. Roqia. Luton, GB. Mon Nov 30 2020

This mid-sleeper bed is the perfect place for both playing and sleeping. The fabric set is included in the delivery and consists of a curtain and three pockets featuring a princess design. The light tone of the fabric harmonizes wonderfully with the playful patterns of the princess theme. The front curtain has an open entranceway which is covered by a flap that can easily be rolled up. The fabric in this set is made of 100% cotton and can be washed at 30°C. The pockets feature different designs and can be attached to the safety rail using the included straps. The space underneath the bed is the perfect play area or can be used as a practical storage space. The ladder can be installed on either the left or right side of the bed. This bed is characterized by its high-quality workmanship, stable construction, surrounding safety rails, and wide ladder rungs for safely climbing up and down.

Easy to follow instructions and my daughter loves it.. Kirsty. Billinge Wigan, GB. Tue Aug 06 2019

This mid sleeper bed is made of solid pine wood and is the perfect place for playing and sleeping. The fabric set is included in the delivery and consists of a curtain, a tunnel and three pockets featuring a spring design. The light tone of the fabric harmonises wonderfully with the floral pattern. The front curtain has an open entranceway which is covered by a flap that can easily be rolled up. The fabric in this set is made of 100% cotton and can be washed at 30°C. The pockets feature different designs and can be attached to the safety rail using the included straps. The space underneath the bed is the perfect play area or can be used as practical storage space. The ladder can be installed on either the left or right side of the bed. This bed is characterised by its high-quality workmanship, stable construction, surrounding safety rails and wide ladder rungs for safely climbing up and down.

We have just bought this bed for my 6 year old daughter and she loves it , it’s it great quality and very sturdy. Cheryl. Washington, GB. Thu May 07 2020

This cabin bed is perfect for both playing and sleeping. It's made of natural-coloured, solid pine wood. The included Birdy fabric curtain set has a playful, romantic style. It has a light beige background and features a floral pattern with butterflies and vines. The front curtain has an open entranceway which is covered by a flap that can easily be rolled up. They are made of 100% cotton and are washable at 30ºC. The space beneath the bed is the perfect play area, or can be used as practical storage space. The distance from the floor to the bottom of the bed is approximately 70cm. A slatted frame is included. The ladder can be attached on either the left or right side. The bed features all-round side rails and wide ladder steps for safety when climbing up and down, and is both well made and sturdy. The posts are approximately 6.5cm x 6.5cm thick. The bed is European single size. It requires approximately 210cm x 106cm of floor space. It's 114cm tall. The product requires self-assembly, using the simple assembly instructions included. FSC® certified and manufactured in accordance with EN 747-2:2012+A1(2015).

Arrived quickly, easy to assemble. Granddaughter loves her new bed. Rebecca. Balsall Common Coventry, GB. Sun Feb 11 2024

The loft bed from the series Pino is an ideal bed for sleeping, playing, and dreaming. The lying surface is 90 x 200 cm. It is made of solid pine and has a post thickness of 64 x 64 mm. The finish is lacquered. It is fully equipped, with a roll-up slatted frame and a ladder. The textile set in the design "Dino", consisting of the curtain with the great representation of a fire engine, is also included. The textiles are 100% polyester, and washable at 30°. The imaginative design brings a lot of fun while playing, it is an adventure playground for every child's room. The ladder (approx. 35 cm wide) can be mounted on the left or right. The all-around fall protection, the wide steps for safe climbing up and down, as well as the high-quality workmanship and good stability, distinguish this article. The height from the upper edge of the bedside to the upper edge of the fall protection is approx. 36 cm, with a max. mattress height of approx. 20 cm. The space under the bed can be used for playing or as storage space. The height from the floor to the lower edge of the bedside is approx. 72 cm. The distance between the ladder and the bedpost is approx. 157 cm. As for floor space in the room, you need approx. W: 210 x D: 106 cm. The height is approx. 114 cm. The bed is not suitable for children under 6 years. The decoration and the mattress are not included. The article is disassembled with assembly instructions for easy self-assembly. FSC® certified and built according to EN 747-2:2012+A1(2015).

Great bed perfect for my little boy. Easy to assemble and exactly as advertised. Anonymous. Sat Aug 26 2023

Just the space of lower deck is not enough. Alex. Kingston Upon Thames, GB. Tue Apr 28 2020

This loft bed with a sleeping facility on top is ideal for the children's room or the student's apartment. It has a lot of functions in a small space. The ladder and the roller-slatted frame are included. The upper-lying surface has high all-around fall protection. The ladder runs at an angle and can be mounted on the left or right. Wide steps for safe ascent and descent. The space under the bed can be used very well for a desk, a shelf, or a seat. A real advantage, especially in small spaces. The bed is of high quality and is characterized by very good stability. The bed is not suitable for children under 6 years of age.

Great, high sleeper. Easy to assemble and a really good quality. Anonymous. Ringwood, GB. Thu Oct 15 2020

It is not a week since I built this bed for my 4 year old. He really likes, and has had no problems getting used to it for sleeping and playing. The construction is first rate, and it is clear that care and attention has gone into every step. Different types of wood and joint are used, each one carefully selected for the job at hand. It took 3-4 hours for me to build it on my own: give yourself plenty of time! We were expecting the bed to come with a curtain, as you see in the online images, but this was not the case. Overall, we are very pleased to have chosen this bed, along with one of the recommended mattresses, and expect to use them for many years to come.. Anonymous. Sat Jan 14 2023

This mid sleeper bed is made of solid pine wood and features a slide, making it the perfect place for playing and sleeping. The fabric set is included in the delivery and consists of a curtain and three pockets featuring a princess design. The light tone of the fabric harmonises wonderfully with the playful patterns of the princess theme. The front curtain has an open entranceway which is covered by a flap that can easily be rolled up. The fabric in this set is made of 100% cotton and can be washed at 30°C. The pockets feature different designs and can be attached to the safety rail using the included straps. The space underneath the bed is the perfect play area or can be used as a practical storage space. The ladder and slide can be installed on either the left or right side of the bed. This bed is characterised by its high-quality workmanship, stable construction, surrounding safety rails and wide ladder rungs for safely climbing up and down.

Roza. Wermelskirchen, DE. Tue Mar 10 2020

This bunk loft bed with 2 sleeping accommodations for the children's room has the height of 140 cm. It is made of solid pine. The ladder and 2 roll up slatted frames are included. The upper lying surface has a circumferential fall protection. The ladder can be mounted on the left or right. The bunk bed can be converted back into 2 single beds if required as the posts are split. Wide steps for safe climbing up and down. The bed has a high quality finish and is characterised by very good stability. The distance between the lying surfaces is approx. 68 cm, the ground clearance approx. 20 cm. The post thickness is approx. 6.4 x 6.4 cm, the bed sides and the fall protection are 2.0 cm thick. The product is disassembled for easy self assembly. Max. Mattress height approx. 20 cm. Wall mounting is required. Not suitable for children under 6 years. The decoration is not included. FSC® certified and built according to EN 747-2:2012+A1(2015).

Fantastic value , many thanks. Anonymous. Fri Jul 10 2026

Mid-height play bed in a hut look with a bed surface measuring 90 x 200cm. This bed invites you to play and dream. The carrier material is high-quality MDF, painted white. The feet are made at stable angles and offer high stability. The ladder, which is mounted at the front, allows the child to easily reach the upper-lying surface. It has a width of approx. 35.4cm and has handleholes at the top so that the child can hold on. The wide side rails provide additional safety. A slatted frame is already included as a mattress topper for the upper-lying surface. The mattress is not included. The maximum mattress height is 16cm. The area under the bed can be used for playing. On the right, there is a door-like passage, approx. 64cm wide and approx. 80cm high. To the left of the ladder, there is a window measuring approx. 31 x 31cm, with a surrounding frame. The planked-effect head and foot sides are closed. The bed is open at the back to the wall side. The curtain set for doors and windows is attached to the back of the bed. When rolled up, they are held by a loop. The cream-white fabric is made of 100 % cotton and can be washed at 40 ° C. The product is of high quality and the fittings are made of metal. The mattress, curtains, and decorations are not included. The product is disassembled, with assembly instructions for easy self-assembly. Approximate footprint: 120cm H x 206cm W x 96cm D (+ 9cm ladder).

Daughter loves the bed. Took me 3 hours to put together so not too bad - not the strongest wood though so defo recommend getting someone to help you.. Anonymous. Wed Dec 18 2024

The mid -height bed from the Scott collection, with a slide and a bed surface of 90 x 200cm, is ideal for playing and sleeping. An adventure playground in the children's room. The item is made of solid pine and the surface is painted white. The textile set in the "Spring" design, consisting of the curtain and 3 pockets, is included in the delivery. The base color is a light pink shade on which the floral pattern stands out. The front curtain has an opening that can be rolled up. The textiles are 100% cotton and washable at 30 ° C. The bags each have different designs and are attached to the fall protection with the flaps. A roll -out slatted frame with 15 slats (approx. W: 70mm x H: 1.7mm) is included. The fall protection provides additional safety and has a rung look at the front, while at the back it consists of two panels. The distance from the floor to the top edge of the fall protection is 114cm, the entrance height to the top of the bed is approx. 81.5cm and the height from the top of the bed to the top of the fall protection is approx. 32cm. The headboard and footboard have a closed panel with a milled ornamentation on the outside. The panel is smooth on the inside. The ladder tower with a slide is special. For space -saving reasons, the slide runs at a 33 ° angle to the bed as shown. It can run to the right or left by mounting the parts of the fall protection in a mirrored manner. The approx. 35cm wide steps ensure safe climbing up and down. In addition, the ladder has handle holes that are great for holding onto. The space under the bed, from the floor to the lower edge of the bed, is approx. 72.5cm high and can still be used as storage space. The high -quality workmanship and very good stability characterize this bed. The post thickness is approx. 55.5 x 55.5mm. Max. Mattress height approx. 20cm. Not suitable for children under 6 years of age. The product is disassembled for easy self -assembly. The mattress, pillows and decorations are not included. FSC® certified and built according to EN 747-2: 2012+A1 (2015). Required floor space approx. W: 207.6 x H: 114 x D: 203.7cm.

Sehr stabil und robust.. Ali Amigh. Reiskirchen, DE. Sun Dec 01 2024

A functional mid-sleeper bed with matching furniture pieces for sleeping and playing. The furniture set includes a mid-sleeper bed, a desk, and a shelf that offers plenty of practical storage space for the children's room. The bed is made of solid pine wood, while both the desk and shelf are made of high-quality MDF (medium-density fibreboard). A slatted bed frame is included in the delivery. The ladder can be mounted on the left or right side. The surrounding bedside rails, the wide ladder steps for safe ascending and descending, the high-quality finish, and the good stability are all notable features of this bed. The desk has casters at the front and thus, is easy to move and install securely under the bed. The shelving unit on the front with fixed shelves is especially practical and offers additional storage space. Beside the shelf is a chest of drawers with four spacious drawers which can simply be pushed under the bed. The small shelf that can be hung on the bed railing is also included in the delivery. Not suitable for children under 6 years of age. This furniture set is delivered unassembled and comes with assembly instructions for easy self-assembly. FSC and EN 747-2:2012+A1(2015) certified.

Just like the pictures. Mrs Nicole. London, GB. Tue Oct 23 2018

This bunk loft bed comes with 2 sleeping accommodations for the children's room. It is made of solid pine. The ladder and 2 rolling slatted frames are included. The upper-lying surface has circumferential fall protection. The ladder can be mounted on the left and right. In addition, the two drawers under the bed are included. These can be well used as additional storage space. The bunk bed can be converted back into 2 single beds if necessary, as the posts are split. Wide steps ensure safe climbing up and down. The bed is of high-quality workmanship and is characterized by very good stability. Not suitable for children under 6 years. The product is disassembled, for easy self-assembly. FSC® certified and certified according to EN 747-2:2012+A1(2015).

Sehr massives, stabiles Bett! Sieht toll aus! Mit Anleitung relativ leicht aufzubauen! Sind begeistert!!!. Anabella. Troisdorf, DE. Sun Sep 05 2021

This loft bed is ideal for the children's room. It has a lot of function in a small space and is made of solid pine, in a gray lacquered finish. The lying surface at the top is 140 x 200 cm and the ladder and the roller-slatted frame are included. The upper-lying surface has a 55 cm high circumferential fall protection. The ladder (35 cm wide) is slanted and can be mounted on the left or right. Wide steps for safe ascent and descent. The clear height under the bed is approx. 146 cm. The space under the bed is used for a large writing desk. It makes optimum use of the space and offers plenty of room as a work surface and shelf. The working height is approx. 75 cm and the legroom under the top is approx. 65 cm. The size of the top is approx. W: 205 x D: 65 cm. The bed has a high-quality finish and is characterized by very good stability. The post thickness is approx. 6.4 x 6.4 cm, the bedsides, and the fall protection are 2.0 cm thick. The footprint of the loft bed: W: 209.4 H: 190 D: 149/214.7 cm (incl. ladder). The goods are disassembled for easy self-assembly. Max. Mattress height approx. 18.5 cm. Not suitable for children under 6 years. The decoration is not included. FSC® certified and built according to EN 747-1.

This bed is amazing. Strong and steady, my son loves it. The service and assembly was professional.. Dawn. Seaham, GB. Wed May 26 2021

This loft bed with 1 sleeping accommodation above and a writing desk below is ideal for the children's room. It has a lot of function in a small space and is made of solid pine, in a gray lacquered finish. The sleeping surface on top is 90 x 200 cm each and the ladder, as well as the rolling slatted frame, are included. The upper-lying surface has high circumferential fall protection. The ladder can only be mounted in the middle. Wide steps for safe climbing up and down. The bed has a high-quality finish and is characterized by very good stability. Under the bed, there is a writing tablet that can be mounted on the right or left (dimensions approx. W: 120 x D: 70 cm), and behind the ladder, there is a shelf. There is plenty of space to store writing utensils and books. The bed is not suitable for children under 6 years. The post thickness is approx. 6.4 x 6.4 cm, the bedsides, and the fall protection are 2.0 cm thick. Product dimensions: W: 208 H: 175 D: 105 cm. The product is disassembled for easy self-assembly. Max. Mattress height approx. 15 cm. Not suitable for children under 6 years. The decoration is not included. FSC® certified and built according to EN 747-2:2012+A1(2015).

Son absolutely loves his new bed! It's very sturdy and good condition. Everything delivered (no missing pieces) and was even delivered early. So far couldn't fault it (although husband was the one to battle through the instructions to build it!).. C. Keswick, GB. Mon Dec 13 2021

Instill a sense of wonder in your child with this car bunk bed from Vipack. The solid construction and high-quality workmanship make this a safe choice for your child. The bed can be assembled quickly and easily using the detailed assembly instructions included.

Deborah. Bielefeld, DE. Wed Mar 11 2020

This mid-sleeper bed is made of solid pine wood and features a slide, making it the perfect place for playing and sleeping. The fabric set is included in the delivery and consists of a tunnel and a curtain featuring a princess design. The light tone of the fabric harmonizes wonderfully with the playful patterns of the princess theme. The front curtain has an open entranceway which is covered by a flap that can easily be rolled up. The fabric in this set is made of 100% cotton and can be washed at 30°C. The space underneath the bed is the perfect play area or can be used as a practical storage space. The ladder and slide can be installed on either the left or right side of the bed. This bed is characterized by its high-quality workmanship, stable construction, surrounding safety rails, and wide ladder rungs for safely climbing up and down.

Fab quality, my little one loves it so much and can’t wait to sleep in it. Leah. Bradford, GB. Fri Apr 16 2021

The mid -height bed, with a lying surface of 90 x 200cm and an inclined ladder, is ideal for playing and sleeping. A solid roll -up slatted frame with 15 slats is included. An adventure playground in the children's room. The base material is solid beech, painted white. The high -quality selection of the material is reflected in the use of wood and the workmanship. The black screws are visible and set an optical accent. The fall protection provides additional safety and has a finely crafted rungs look. The round bars have a thickness of approx. 16mm. The distance from the floor to the top edge of the fall protection is approx. 114cm, the entrance height to the top edge of the bed is approx. 81.5cm and the height from the top of the bed side to the top edge of the fall protection is approx. 32cm. The ladder with 3 steps (distance approx. 22.9cm) is inclined and can be installed on the right or left. It has approx. 35cm wide steps which allow safe climbing up and down. The space under the bed surface is approx. 72.5cm high from the floor to the lower edge of the bed and can still be used as storage space. The high -quality workmanship and very good stability characterize this bed. The post thickness is approx. 55 x 55mm. Max. Mattress height approx. 20cm. Not suitable for children under 6 years of age. The product is disassembled for easy self -assembly. The mattress, pillows and decorations are not included. FSC® certified and built according to EN 747-2: 2012+A1 (2015). The bed itself is approx. 207.5cm W x 97.5cm D. The ladder requires a depth of approx. 38cm. Required floor space halfway. Bed approx. W: 207.5cm x H: 114cm x D: 135.5cm.

This platform bed has many functions and, if necessary, can be changed into two beds, with lying surfaces of 90 x 200cm. It has one under the bed drawer, giving you everything you could need for your nursery. The components are made of coated engineered wood with grey edges. The top lying surface area is about 90 x 200cm. The max. mattress height is 20cm. Your child will remain safe in the top bed thanks to the protective rails. The bed is easy to access thanks to the attached ladder, which can be mounted on the right or the left. There is a dip at either end of the bed to help get into the bed. Under the top bed, there is a large metal work surface and compartments for books and other items. The work surface is at a height of about 67cm and has a depth of about 53cm. The distance from the work surface to the lower edge of the bed is 46cm. Underneath this, there is a second, pull-out bed with dimensions of 90 x 200cm. The insert depth for the mattress is about 12cm. The roller guide facilitates the pulling out and pushing in of the bed. Under the second bedroom, there is a bed box with a continuous lower plate, which can be used both as a storage space or as a third bed. The drawer size is about 90 x 190cm. The insert depth for the mattress is about 12cm. The drawer is also on wheels. The mattress is not included. The bed has many features in a small space, all that a child's room could need. The recommended minimum age of the child is 6 years. The space required for the bed is about 222cm W x 161cm H x 102cm D. The decoration, bed linen, and mattresses are not included. The article is delivered unassembled, with assembly instructions for customer assembly.

This is an absolutely amazing product. I know it’s a lot of money for a child’s bed but it’s worth it. Well built, very very practical with the slide out desk and trundle bed. The drawer at the bottom is huge for storage or even another mattress. It does need 2 people to install and takes a long time but the final product is just perfect. Whomever designed this needs a medal!. Patricia. Stony Stratford Milton Keynes, GB. Mon May 20 2019

A chic mid-sleeper bed made of solid pine wood for sleeping and playing. The fabric curtain, with wonderful Bella designs, is included in the delivery. The fabric is made of 100% polyester and is washable at 30°C. The slatted bed frame is also included in the delivery. The ladder and slide can be installed on either the left or right side. The surrounding bedside rails, the wide ladder steps for safe ascending and descending, the high-quality finish and good stability are all notable features of this bed. The space under the bed can be used for playing or as an additional storage space. This product is delivered unassembled and comes with assembly instructions for easy self-assembly. FSC and EN 747-2:2012+A1(2015) certified.

A chic mid-sleeper bed made of solid pine wood for sleeping and playing. The fabric curtain, with wonderful pink flower designs, is included in the delivery. The fabric is made of 100% polyester and is washable at 30°C. The slatted bed frame is also included in the delivery. The ladder and slide can be installed on either the left or right side. The surrounding bedside rails, the wide ladder steps for safe ascending and descending, the high-quality finish, and good stability are all notable features of this bed. The space under the bed can be used for playing or as an additional storage space. This product is delivered unassembled and comes with assembly instructions for easy self-assembly. FSC and EN 747-2:2012+A1(2015) certified.

The mid -height bed from the Scott collection, with a bed surface of 90 x 200cm and a sloping ladder, is ideal for playing and sleeping. An adventure playground in the children's room. The item is made of solid pine and the surface is painted white. A roll -out slatted frame with 15 slats (approx. W: 70mm x H: 1.7mm) is included. The fall protection provides additional safety and has a rung look at the front, while at the back it consists of two panels. The distance from the floor to the top edge of the fall protection is approx. 114cm, the entrance height to the top edge of the bed is approx. 81.5cm and the height from the top of the bed to the top edge of the fall protection is approx. 32cm. The headboard and footboard have a closed panel with a milled ornamentation on the outside. The panel is smooth on the inside. The ladder is slanted and can be installed on the right or left. It has approx. 35cm wide steps that allow you to safely climb up and down. In addition, the ladder has handle holes that are great for holding onto. The space under the bed, from the floor to the lower edge of the bed, is approx. 72.5cm high and can still be used as storage space. The high -quality workmanship and very good stability characterize this bed. The post thickness is approx. 55.5 x 55.5mm. Max. Mattress height approx. 20cm. Not suitable for children under 6 years of age. The product is disassembled for easy self -assembly. The mattress, pillows and decorations are not included. FSC® certified and built according to EN 747-2: 2012+A1 (2015). The bed itself is approx. 207.6cm W x 97.6cm D. The ladder requires a depth of approx. 37.1cm. Required floor space approx. W: 207.6cm x H: 114.7cm x D: 134.7cm.

The mid -height bed from the Scott collection, with a slide and a bed surface of 90 x 200cm, is ideal for playing and sleeping. An adventure playground in the children's room. The item is made of solid pine and the surface is painted white. A roll -out slatted frame with 15 slats (approx. W: 70mm x H: 1.7mm) is included. The fall protection provides additional safety and has a rung look at the front, while at the back it consists of two panels. The distance from the floor to the top edge of the fall protection is 114cm, the entrance height to the top of the bed is approx. 81.5cm and the height from the top of the bed to the top of the fall protection is approx. 32cm. The headboard and footboard have a closed panel with a milled ornamentation on the outside. The panel is smooth on the inside. The ladder tower with a slide is special. For space -saving reasons, the slide runs at a 33 ° angle to the bed as shown. It can run to the right or left by mounting the parts of the fall protection in a mirrored manner. The approx. 35cm wide steps ensure safe climbing up and down. In addition, the ladder has handle holes that are great for holding onto. The space under the bed, from the floor to the lower edge of the bed, is approx. 72.5cm high and can still be used as storage space. The high -quality workmanship and very good stability characterize this bed. The post thickness is approx. 55.5 x 55.5mm. Max. Mattress height approx. 20cm. Not suitable for children under 6 years of age. The product is disassembled for easy self -assembly. The mattress, pillows and decorations are not included. FSC® certified and built according to EN 747-2: 2012+A1 (2015). Required floor space approx. W: 207.6 x H: 114 x D: 203.7cm.

The bed is modeled on a tree house and is a great place to sleep and play. The bed drawer is included. The carrier material is solid wood and high -quality MDF painted white. The continuous bed posts and solid construction offer a high degree of stability. The millings in the individual components are modeled on wooden planks, they convey a look that is typical of tree houses. The bed surface is 90 x 200cm and easy to reach due to the low entry height of 34.5cm. The access to the bed, which is offset to the left, has a width of approx. 97cm and a clearance height of approx. 71.5cm. To the right of this is a window with a frame measuring 35 x 35cm. The bed does not have a slatted frame in the delivery and is suitable for a fixed slatted frame or roll -out slatted frame. The inlay depth for the slatted frame and mattress is approx. 10cm. Due to the low entrance height, the bed is easy to reach and still offers a floor clearance of approx. 20cm. The upper edge of the head and foot sides is approx. 50cm, the bed is open at the back. The roof sloping forward has a maximum height of approx. 158.5cm, and approx. 110cm at the front. The roof is offset on the left (width approx. 69cm), the closed elements on the right and left have tapered millings and can only be mounted in the specified position. Warning: The roof must not be climbed. The bed drawer with an interior dimensions of approx. 90 x 190cm is ideal as an additional sleeping place and storage space for toys or bed linen. The material is high -quality MDF painted white. The front of the bed drawer is smooth. The two handle recesses are a nice detail and at the same time make it easier to pull out and push in the bed drawer. The drawer is easy to use thanks to the castors. The inner height of the bed drawer is approx. 12cm. The continuous base plate is decorated with a decorative coating. The external dimensions of the bed drawer are approx. 198.5cm W x 18.5cm H x 94cm D. The product is of high quality and the fittings are made of metal. The slatted frame, mattress and decorations are not included. The product is disassembled, with assembly instructions for easy self -assembly. Total storage area: W: 214 x H: 158.5 x D: 108cm + 94cm with the bed drawer extended.

This half loft bed invites you to play and sleep. It is made from solid pine. The textile set in the "Spring" design, consisting of the curtain and 3 bags, is included in the scope of delivery. The floral pattern contrasts beautifully with the light shade. The front curtain has a passage that can be rolled up. The textiles are 100% cotton, washable at 30 °C. The bags each have a different motif and are attached to the fall protection with the straps. The space under the bed is great for playing or can be used as storage space. The ladder can be mounted on the left or right. The all-round fall protection, the wide steps for safe ascent and descent as well as the high-quality workmanship and good stability characterize this article.

The loft bed from the series Pino is an ideal bed for sleeping, playing and dreaming. The lying surface is 90 x 200 cm. It is made of solid pine and has a post thickness of 64 x 64 mm. The finish is lacquered. It is fully equipped, with a roll-up slatted frame and the ladder. The textile set in the design "Pet Shop", consisting of the curtain with the great representation of a fire engine, is also included. The textiles are 100% polyester, washable at 30°. The imaginative design brings a lot of fun while playing, it is an adventure playground for every child's room. The ladder (approx. 35 cm wide) can be mounted on the left or right. The all-round fall protection, the wide steps for safe climbing up and down, as well as the high-quality workmanship and good stability, distinguish this article. The height from the upper edge of the bed side to the upper edge of the fall protection is approx. 36 cm, with a max. mattress height of approx. 20 cm. The space under the bed can be used for playing or as storage space. The height from the floor to the lower edge of the bed side is approx. 72 cm. The distance between ladder and bedpost is approx. 157 cm. As floor space in the room you need approx. W: 210 x D: 106 cm. The height is approx. 114 cm. The bed is not suitable for children under 6 years. The decoration and the mattress are not included. The article is disassembled with assembly instructions for easy self-assembly. FSC® certified and built according to EN 747-2:2012+A1(2015).

The loft bed from the series Pino is an ideal bed for sleeping, playing and dreaming. The lying surface is 90 x 200 cm. It is made of solid pine and has a post thickness of 64 x 64 mm. The finish is lacquered. It is fully equipped, with a roll-up slatted frame and the ladder. The textile set in the design "Caribian Pirate", consisting of the curtain with the great representation of a fire engine, is also included. The textiles are 100% polyester, washable at 30°. The imaginative design brings a lot of fun while playing, it is an adventure playground for every child's room. The ladder (approx. 35 cm wide) can be mounted on the left or right. The all-round fall protection, the wide steps for safe climbing up and down, as well as the high-quality workmanship and good stability, distinguish this article. The height from the upper edge of the bed side to the upper edge of the fall protection is approx. 36 cm, with a max. mattress height of approx. 20 cm. The space under the bed can be used for playing or as storage space. The height from the floor to the lower edge of the bed side is approx. 72 cm. The distance between ladder and bedpost is approx. 157 cm. As floor space in the room you need approx. W: 210 x D: 106 cm. The height is approx. 114 cm. The bed is not suitable for children under 6 years. The decoration and the mattress are not included. The article is disassembled with assembly instructions for easy self-assembly. FSC® certified and built according to EN 747-2:2012+A1(2015).

The loft bed from the series Pino is an ideal bed for sleeping, playing, and dreaming. The lying surface is 90 x 200 cm. It is made of solid pine and has a post thickness of 64 x 64 mm. The finish is lacquered. It is fully equipped, with a roll-up slatted frame and a ladder. The textile set in the design "Space Shuttle", consisting of the curtain with the great representation of a fire engine, is also included. The textiles are 100% polyester, and washable at 30°. The imaginative design brings a lot of fun while playing, it is an adventure playground for every child's room. The ladder (approx. 35 cm wide) can be mounted on the left or right. The all-around fall protection, the wide steps for safe climbing up and down, as well as the high-quality workmanship and good stability, distinguish this article. The height from the upper edge of the bedside to the upper edge of the fall protection is approx. 36 cm, with a max. mattress height of approx. 20 cm. The space under the bed can be used for playing or as storage space. The height from the floor to the lower edge of the bedside is approx. 72 cm. The distance between the ladder and the bedpost is approx. 157 cm. As for floor space in the room you need approx. W: 210 x D: 106 cm. The height is approx. 114 cm. The bed is not suitable for children under 6 years. The decoration and the mattress are not included. The article is disassembled with assembly instructions for easy self-assembly. FSC® certified and built according to EN 747-2:2012+A1(2015).

This bunk loft bed with 2 sleeping accommodations for the children's room has a special height of 182 cm. It is made of solid pine, in a gray lacquered finish. The lying surfaces are each 90 x 200 cm and the ladder and 2 roll-up slatted frames are included. The upper-lying surface has circumferential fall protection. The ladder can be mounted on the left or right. The bunk bed can be converted back into 2 single beds if required as the posts are split. The distance between the lying surfaces is approx. 110 cm, the ground clearance approx. 20 cm. Wide steps for safe climbing up and down. The bed has a high-quality finish and is characterized by very good stability. The post thickness is approx. 6.4 x 6.4 cm, the bedsides, and the fall protection are 2.0 cm thick. Product dimensions: W: 210 H: 182 D: 105 cm. The product is disassembled for easy self-assembly. Max. Mattress height approx. 20 cm. Wall mounting is required. Not suitable for children under 6 years. The decoration is not included. FSC® certified and built according to EN 747-2:2012+A1(2015).

Anonymous. Tue Oct 08 2024

The loft bed from the series Pino is an ideal bed for sleeping, playing, and dreaming. The lying surface is 90 x 200 cm. It is made of solid pine and has a post thickness of 64 x 64 mm. The finish is lacquered. It is fully equipped, with a roll-up slatted frame and a ladder. The textile set in the design "FIRE RESCUE", consisting of the curtain with the great representation of a fire engine, is also included. The textiles are 100% polyester, and washable at 30°. The imaginative design brings a lot of fun while playing, it is an adventure playground for every child's room. The ladder (approx. 35 cm wide) can be mounted on the left or right. The all-around fall protection, the wide steps for safe climbing up and down, as well as the high-quality workmanship and good stability, distinguish this article. The height from the upper edge of the bedside to the upper edge of the fall protection is approx. 36 cm, with a max. mattress height of approx. 20 cm. The space under the bed can be used for playing or as storage space. The height from the floor to the lower edge of the bedside is approx. 72 cm. The distance between the ladder and the bedpost is approx. 157 cm. As for floor space in the room, you need approx. W: 210 x D: 106 cm. The height is approx. 114 cm. The bed is not suitable for children under 6 years. The decoration and the mattress are not included. The article is disassembled with assembly instructions for easy self-assembly. FSC® certified and built according to EN 747-2:2012+A1(2015).

The loft bed from the series Pino is an ideal bed for sleeping, playing and dreaming. The lying surface is 90 x 200 cm. It is made of solid pine and has a post thickness of 64 x 64 mm. The finish is lacquered. It is fully equipped, with a roll-up slatted frame and the ladder. The textile set in the design "Princess Sophie", consisting of the curtain with the great representation of a fire engine, is also included. The textiles are 100% polyester, washable at 30°. The imaginative design brings a lot of fun while playing, it is an adventure playground for every child's room. The ladder (approx. 35 cm wide) can be mounted on the left or right. The all-round fall protection, the wide steps for safe climbing up and down, as well as the high-quality workmanship and good stability, distinguish this article. The height from the upper edge of the bed side to the upper edge of the fall protection is approx. 36 cm, with a max. mattress height of approx. 20 cm. The space under the bed can be used for playing or as storage space. The height from the floor to the lower edge of the bed side is approx. 72 cm. The distance between ladder and bedpost is approx. 157 cm. As floor space in the room you need approx. W: 210 x D: 106 cm. The height is approx. 114 cm. The bed is not suitable for children under 6 years. The decoration and the mattress are not included. The article is disassembled with assembly instructions for easy self-assembly. FSC® certified and built according to EN 747-2:2012+A1(2015).

This mid-sleeper bed is made of solid pine wood and is the perfect place for playing and sleeping. The fabric set is included in the delivery and consists of a curtain and three pockets featuring an 'Astro design. The dark blue tone of the fabric harmonizes wonderfully with the playful patterns that make up the space theme. The front curtain has an open entranceway which is covered by a flap that can easily be rolled up. The fabric in this set is made of 100% cotton and can be washed at 30°C. The pockets feature different designs and can be attached to the safety rail using the included straps. The space underneath the bed is the perfect play area or can be used as a practical storage space. The ladder can be installed on either the left or right side of the bed. This bed is characterized by its high-quality workmanship, stable construction, surrounding safety rails, and wide ladder rungs for safely climbing up and down.

The mid -height bed from the Scott collection, with a bed surface of 90 x 200cm and a sloping ladder, is ideal for playing and sleeping. An adventure playground in the children's room. The item is made of solid pine and the surface is painted white. The textile set in the design "Princess Sophie", consisting of the curtain with the great depiction of a fire engine, is also included. The textiles are 100% polyester and washable at 30 ° C. The imaginative design makes playing a lot of fun. A roll -out slatted frame with 15 slats (approx. W: 70mm x H: 1.7mm) is included. The fall protection provides additional safety and has a rung look at the front, while at the back it consists of two panels. The distance from the floor to the top edge of the fall protection is approx. 114cm, the entrance height to the top edge of the bed is approx. 81.5cm and the height from the top of the bed to the top edge of the fall protection is approx. 32cm. The headboard and footboard have a closed panel with a milled ornamentation on the outside. The panel is smooth on the inside. The ladder is slanted and can be installed on the right or left. It has approx. 35cm wide steps that allow you to safely climb up and down. In addition, the ladder has handle holes that are great for holding onto. The space under the bed, from the floor to the lower edge of the bed, is approx. 72.5cm high and can still be used as storage space. The high -quality workmanship and very good stability characterize this bed. The post thickness is approx. 55.5 x 55.5mm. Max. Mattress height approx. 20cm. Not suitable for children under 6 years of age. The product is disassembled for easy self -assembly. The mattress, pillows and decorations are not included. FSC® certified and built according to EN 747-2: 2012+A1 (2015). The bed itself is approx. 207.6cm W x 97.6cm D. The ladder requires a depth of approx. 37.1cm. Required floor space approx. W: 207.6cm x H: 114.7cm x D: 134.7cm.

A great loft bed with slide for playing and sleeping made of solid pine. The slide is great fun to play on, an adventure playground for every child's room. The textile curtain in the Pink Flower design is included. The textiles are made of 100% polyester and washable at 30°. A roll-up slatted frame is also included. The ladder and slide can be fitted on the left or right. The all-round fall protection, the wide steps for climbing up and down safely, as well as the high-quality workmanship and good stability characterise this item. The space under the lying surface is ideal for playing or can be used as storage space. The item is supplied disassembled and comes with assembly instructions for easy self-assembly. FSC®-certified and certified according to EN 747-2:2012+A1(2015).

The mid -height bed from the Scott collection, with a bed surface of 90 x 200cm and a sloping ladder, is ideal for playing and sleeping. An adventure playground in the children's room. The item is made of solid pine and the surface is painted white. The textile set in the design "Pet Shop", consisting of the curtain with the great depiction of a fire engine, is also included. The textiles are 100% polyester and washable at 30 ° C. The imaginative design makes playing a lot of fun. A roll -out slatted frame with 15 slats (approx. W: 70mm x H: 1.7mm) is included. The fall protection provides additional safety and has a rung look at the front, while at the back it consists of two panels. The distance from the floor to the top edge of the fall protection is approx. 114cm, the entrance height to the top edge of the bed is approx. 81.5cm and the height from the top of the bed to the top edge of the fall protection is approx. 32cm. The headboard and footboard have a closed panel with a milled ornamentation on the outside. The panel is smooth on the inside. The ladder is slanted and can be installed on the right or left. It has approx. 35cm wide steps that allow you to safely climb up and down. In addition, the ladder has handle holes that are great for holding onto. The space under the bed, from the floor to the lower edge of the bed, is approx. 72.5cm high and can still be used as storage space. The high -quality workmanship and very good stability characterize this bed. The post thickness is approx. 55.5 x 55.5mm. Max. Mattress height approx. 20cm. Not suitable for children under 6 years of age. The product is disassembled for easy self -assembly. The mattress, pillows and decorations are not included. FSC® certified and built according to EN 747-2: 2012+A1 (2015). The bed itself is approx. 207.6cm W x 97.6cm D. The ladder requires a depth of approx. 37.1cm. Required floor space approx. W: 207.6cm x H: 114.7cm x D: 134.7cm.

A great loft bed with a slide for playing and sleeping. Made of solid pine with a gray finish. The slide is a lot of fun to play with. A roll -up slatted frame is included. The ladder and slide can be mounted on the left or right. The surrounding fall protection, the wide steps for safe climbing up and down, as well as the high-quality workmanship and good stability, characterize this article. The space under the bed can be used for playing, or for storage. The height from the floor to the lower edge of the bed is approximately 70cm. Post thickness approx. 6.4 x 6.4cm, the bed sides and the fall protection are 2.0cm thick. The bed surface is 90 x 200cm. Required floor space approx. 210 x 218cm. Height 114cm. The item is disassembled with assembly instructions for easy self -assembly. Height from the upper edge of the bed to the upper edge of the fall protection: Approx. 36cm. Max. Mattress height approx. 20cm. Not suitable for children under 6 years of age. The decoration is not included. The decoration is not included. FSC® certified and built according to EN 747-2: 2012+A1 (2015).

A great loft bed with a slide for playing and sleeping made from solid pine. The slide brings a lot of fun while playing, an adventure playground for every child's room. The textile curtain in the Domino design is included in the scope of delivery. The textiles are made from 100% polyester and are washable at 30°. A roller-slatted frame is also included. The ladder and slide can be mounted on the left or right. The all-round fall protection, the wide steps for safe ascent and descent, as well as the high-quality workmanship and good stability, characterize this article. The space under the lying surface is great for playing or can be used as storage space. The item is disassembled with assembly instructions for easy self-assembly. FSC®-certified and EN 747-2:2012+A1(2015) certified.

The mid -height bed from the Scott collection, with a bed surface of 90 x 200cm and a sloping ladder, is ideal for playing and sleeping. An adventure playground in the children's room. The item is made of solid pine and the surface is painted white. The "Caribian Pirate" design, consisting of a curtain with a great depiction of a fire engine, is also included. The textiles are 100% polyester and washable at 30 ° C. The imaginative design makes playing a lot of fun. A roll -out slatted frame with 15 slats (approx. W: 70mm x H: 1.7mm) is included. The fall protection provides additional safety and has a rung look at the front, while at the back it consists of two panels. The distance from the floor to the top edge of the fall protection is approx. 114cm, the entrance height to the top edge of the bed is approx. 81.5cm and the height from the top of the bed to the top edge of the fall protection is approx. 32cm. The headboard and footboard have a closed panel with a milled ornamentation on the outside. The panel is smooth on the inside. The ladder is slanted and can be installed on the right or left. It has approx. 35cm wide steps that allow you to safely climb up and down. In addition, the ladder has handle holes that are great for holding onto. The space under the bed, from the floor to the lower edge of the bed, is approx. 72.5cm high and can still be used as storage space. The high -quality workmanship and very good stability characterize this bed. The post thickness is approx. 55.5 x 55.5mm. Max. Mattress height approx. 20cm. Not suitable for children under 6 years of age. The product is disassembled for easy self -assembly. The mattress, pillows and decorations are not included. FSC® certified and built according to EN 747-2: 2012+A1 (2015). The bed itself is approx. 207.6cm W x 97.6cm D. The ladder requires a depth of approx. 37.1cm. Required floor space is approximately 207.6cm W x 114.7cm H x 134.7cm D.

The mid -height bed from the Scott collection, with a bed surface of 90 x 200cm and a sloping ladder, is ideal for playing and sleeping. An adventure playground in the children's room. The item is made of solid pine and the surface is painted white. The textile set in the design "Space Shuttle", consisting of the curtain with the great depiction of a fire engine, is also included. The textiles are 100% polyester and washable at 30 ° C. The imaginative design makes playing a lot of fun. A roll -out slatted frame with 15 slats (approx. W: 70mm x H: 1.7mm) is included. The fall protection provides additional safety and has a rung look at the front, while at the back it consists of two panels. The distance from the floor to the top edge of the fall protection is approx. 114cm, the entrance height to the top edge of the bed is approx. 81.5cm and the height from the top of the bed to the top edge of the fall protection is approx. 32cm. The headboard and footboard have a closed panel with a milled ornamentation on the outside. The panel is smooth on the inside. The ladder is slanted and can be installed on the right or left. It has approx. 35cm wide steps that allow you to safely climb up and down. In addition, the ladder has handle holes that are great for holding onto. The space under the bed, from the floor to the lower edge of the bed, is approx. 72.5cm high and can still be used as storage space. The high -quality workmanship and very good stability characterize this bed. The post thickness is approx. 55.5 x 55.5mm. Max. Mattress height approx. 20cm. Not suitable for children under 6 years of age. The product is disassembled for easy self -assembly. The mattress, pillows and decorations are not included. FSC® certified and built according to EN 747-2: 2012+A1 (2015). The bed itself is approx. 207.6cm W x 97.6cm D. The ladder requires a depth of approx. 37.1cm. Required floor space approx. W: 207.6cm x H: 114.7cm x D: 134.7cm.

A chic loft bed to play and sleep. Made of solid pine in a grey lacquered finish. The textile set in the design "pirates", consisting of the curtain, with a great representation of a pirate head and, is included. The textiles are 100% polyester, washable at 30°. The space under the bed is great for playing or can be used as storage space. A roll-up slatted frame is included in the delivery. The ladder can be mounted on the left or right side. The all-round fall protection, the wide steps for safe climbing up and down, as well as the high-quality workmanship and good stability, distinguish this article. The article is disassembled with assembly instructions for easy self-assembly. Height from the top edge of the bedside to the top edge of the fall protection approx. 36 cm.

A chic loft bed to play and sleep. Made of solid pine in a grey lacquered finish. The textile set in the design "pink flower", consisting of the curtain and is included. The textiles are 100% polyester, washable at 30°. The space under the lying surface is great for playing or can be used as storage space. A roll-up slatted frame is included in the delivery. The ladder can be mounted on the left or right side. The all-round fall protection, the wide steps for safe climbing up and down, as well as the high-quality workmanship and good stability, distinguish this article. The article is disassembled with assembly instructions for easy self-assembly. Height from the top edge of the bedside to the top edge of the fall protection approx. 36 cm.