European Single (90 x 200cm) Vipack Children's Beds

The Sheila toddler canopy bed is a nicely eccentric choice for your child's bedroom. It's a high-quality and stable bed. The slatted frame is included in the delivery. Once that has been screwed to the frame support bars there will be a slight gap between it and the ground, which will enable air circulation. The frame is made of solid pine, while the tops of the posts and the crossbar are painted white. The mattress and decorative material are not included in the delivery. All items will arrive unassembled and come with an instruction manual for easy assembly.

Really lovely bed for my daughter. We are delighted with it. Jenny. Edinburgh, GB. Thu Sep 22 2022

This mid-sleeper bed is the perfect place for both playing and sleeping, made of solid pine wood. The decorative fabric set featuring a spring design is included. The light tone of the fabric fits in wonderfully with the floral pattern. The front curtain has an open entranceway which is covered by a flap that can easily be rolled up. The fabric in this set is made of 100% cotton and can be machine-washed at 30°C. The space underneath the bed is the perfect play area or it can be used as practical storage space. The ladder can be mounted on the left or right. The surrounding bed rails, wide ladder rungs for safely climbing up and down, and the high-quality workmanship along with the stable construction all make this bed stand out.

The bed was really good and the little one loved it. The bed is well made, stable, easy to put together (only took a few hours to put together). Being a mid-sleeper the space under the bed (in terms of height) is limited, so it's quite easy for the little ones to bump their heads. The only real thing that I disliked was the fact that the base of the slide is made from some sort of cardboard like material. There are pieces of wood under the base of the slide to add support, but in places where the base of the slide does not have support directly underneath, it feels more flimsy than I would like. Otherwise, I really like the product. A couple of minor points that I would like to mention. These may have just been one off incidents that impacted me directly, rather than being inherent issues with ordering the product. 1. The bed arrived late (delayed by a month) 2. The build instructions identified the individual pieces using numbers, but the actual pieces of the bed were not numbered. However, working out what went where, was not too hard.. Mustafa. Blackburn, GB. Wed Aug 25 2021

Mid-height play bed in a hut look with a bed surface measuring 90 x 200cm. This bed invites you to play and dream. The carrier material is high-quality MDF, painted white. The feet are made at stable angles and offer high stability. The ladder, which is mounted at the front, allows the child to easily reach the upper-lying surface. It has a width of approx. 35.4cm and has handleholes at the top so that the child can hold on. The wide side rails provide additional safety. A slatted frame is already included as a mattress topper for the upper-lying surface. The mattress is not included. The maximum mattress height is 16cm. The area under the bed can be used for playing. On the right, there is a door-like passage, approx. 64cm wide and approx. 80cm high. To the left of the ladder, there is a window measuring approx. 31 x 31cm, with a surrounding frame. The planked-effect head and foot sides are closed. The bed is open at the back to the wall side. The curtain set for doors and windows is attached to the back of the bed. When rolled up, they are held by a loop. The cream-white fabric is made of 100 % cotton and can be washed at 40 ° C. The product is of high quality and the fittings are made of metal. The mattress, curtains, and decorations are not included. The product is disassembled, with assembly instructions for easy self-assembly. Approximate footprint: 120cm H x 206cm W x 96cm D (+ 9cm ladder).

Daughter loves the bed. Took me 3 hours to put together so not too bad - not the strongest wood though so defo recommend getting someone to help you.. Anonymous. Wed Dec 18 2024

A very nice metal bed from the New York collection. The high-quality surface is powder-coated and has a beautiful colour depth. The tubular frame gives the bed a high level of stability and the horizontally- and vertically-extending struts of the head- and footboards are already mounted. The wide bedsides provide insertion depth for the mattress. The slatted frame with 14 slats is already included. The product is delivered disassembled with mounting instructions for easy self-assembly.

Really nice bed. Clips to hold the slats broke on one and replacement bed took a while to come. However once I received the replacement I haven’t looked back!. Kathleen. Bellaghy Magherafelt, GB. Wed Jul 22 2020

This loft bed with a sleeping facility on top is ideal for the children's room or the student's apartment. It has a lot of functions in a small space. The ladder and the roller-slatted frame are included. The upper-lying surface has high all-around fall protection. The ladder runs at an angle and can be mounted on the left or right. Wide steps for safe ascent and descent. The space under the bed can be used very well for a desk, a shelf, or a seat. A real advantage, especially in small spaces. The bed is of high quality and is characterized by very good stability. The bed is not suitable for children under 6 years of age.

Great, high sleeper. Easy to assemble and a really good quality. Anonymous. Ringwood, GB. Thu Oct 15 2020

The mid -height bed from the Scott collection, with a slide and a bed surface of 90 x 200cm, is ideal for playing and sleeping. An adventure playground in the children's room. The item is made of solid pine and the surface is painted white. A roll -out slatted frame with 15 slats (approx. W: 70mm x H: 1.7mm) is included. The fall protection provides additional safety and has a rung look at the front, while at the back it consists of two panels. The distance from the floor to the top edge of the fall protection is 114cm, the entrance height to the top of the bed is approx. 81.5cm and the height from the top of the bed to the top of the fall protection is approx. 32cm. The headboard and footboard have a closed panel with a milled ornamentation on the outside. The panel is smooth on the inside. The ladder tower with a slide is special. For space -saving reasons, the slide runs at a 33 ° angle to the bed as shown. It can run to the right or left by mounting the parts of the fall protection in a mirrored manner. The approx. 35cm wide steps ensure safe climbing up and down. In addition, the ladder has handle holes that are great for holding onto. The space under the bed, from the floor to the lower edge of the bed, is approx. 72.5cm high and can still be used as storage space. The high -quality workmanship and very good stability characterize this bed. The post thickness is approx. 55.5 x 55.5mm. Max. Mattress height approx. 20cm. Not suitable for children under 6 years of age. The product is disassembled for easy self -assembly. The mattress, pillows and decorations are not included. FSC® certified and built according to EN 747-2: 2012+A1 (2015). Required floor space approx. W: 207.6 x H: 114 x D: 203.7cm.

The build took a couple of hours but had very clear instructions. My 5 year old daughter absolutely loves it. We have added LED lights to the den below and she thinks it is amazing. We still need to add some curtains but i felt that the set you could purchase were too expensive. It feels very sturdy and safe. My 2 year old can even get up and down the ladder easily thanks to the handles at the top.. Jordan. Innerleithen, GB. Thu Aug 27 2020

Complete your child's bedroom with this fun and space-saving bunk bed, featuring handy under-bed storage

Sturdy, well made components. Reasonably easy to assemble although it does need two people as the parts are heavy. Great for storage and the pull out desk works really well.. Jennifer. London, GB. Tue Sep 19 2017

This mid sleeper bed is made of solid pine wood and features a slide, making it the perfect place for playing and sleeping. The fabric set is included in the delivery and consists of a curtain and three pockets featuring a princess design. The light tone of the fabric harmonises wonderfully with the playful patterns of the princess theme. The front curtain has an open entranceway which is covered by a flap that can easily be rolled up. The fabric in this set is made of 100% cotton and can be washed at 30°C. The pockets feature different designs and can be attached to the safety rail using the included straps. The space underneath the bed is the perfect play area or can be used as a practical storage space. The ladder and slide can be installed on either the left or right side of the bed. This bed is characterised by its high-quality workmanship, stable construction, surrounding safety rails and wide ladder rungs for safely climbing up and down.

Roza. Wermelskirchen, DE. Tue Mar 10 2020

This loft bed with 1 sleeping accommodation above is ideal for the children's room or the student apartment. It has a lot of function in a small space and is made of solid pine, in the gray lacquered finish. The top sleeping surface is 90 x 200 cm each and the ladder and roll-up slatted frame are included. The upper lying surface has a high circumferential fall protection. The ladder is slanted and can be mounted on the left or right. Wide steps for safe climbing up and down. The clear height under the bed is approx. 145 cm. The practical armchair with seat cushion, which can be converted into an armchair bed, is also included. It is made of solid pine and painted grey. The edges are rounded and by simply pulling it out, a lying surface measuring approx. 76 x 190 cm can be created. The slatted frame is already included in the delivery. The seat cushion is also included and is simply folded out to the front, it also serves as a mattress. The fabric is black, 100% polyester, removable and hand washable at 30°. Product dimensions armchair: W: 80 H: 68 D: 85 cm, the depth extended is 206 cm. Especially in small rooms this second sleeping unit is a real advantage. The bed has a high quality finish and is characterised by very good stability. The post thickness is approx. 6.4 x 6.4 cm, the bed sides and the fall protection are 2.0 cm thick. Product dimensions: W: 209 H: 190 D: 165 cm. The product is disassembled for easy self-assembly. Max. Mattress height approx. 18.5 cm. Not suitable for children under 6 years. The decoration is not included. FSC® certified and built according to EN 747-1.

Gute Verarbeitung, keine Macken. Mit Anleitung gut aufzubauen. Macht einen stabilen Eindruck. Uns war nur nicht ganz klar, dass das Gästebettder Sessel auch dabei. Das ging unserer Meinung nach nicht genau aus der Beschreibung hervor. Wir hätten es nicht benötigt jetzt steht es rum, bis es mal gebraucht wird.. Jana. DE. Thu Jul 29 2021

This is an exceptional European single bed (90 x 200cm) that features a desk. Simply fold down the bed and the desk disappears under the bed without having to be cleared. Similarly, in just a few seconds, the bed is ready to be used again. On the inside, there is a fitting that locks in the bed. The bed has a continuous base, meaning there is no need for a slatted frame and it can be quickly converted back into the desk. The bed's outer sides are approximately 38mm thick, the inner sides are approximately 18mm thick, and both are made of stable manufactured wood and have high-quality, thick edges. The bed is approximately 91cm tall. The desk has metal extensions under the work surface for support. The desk's work surface measures 198cm in width, 59cm in-depth, and is 75cm high. When the bed has been folded back and the desktop is visible, the product has a height of 148cm. The inlay depth for the mattress is 8cm, and the maximum mattress height is 19cm. Great functionality and high-quality workmanship definitely make this bed stand out The mattress and decorations are not included. The fittings are made of metal. The product is delivered unassembled but can easily be put together using the assembly instructions included. The required floor space is approximately 229cm in width, 91/48cm in height, and 101cm in depth.

Love it! Took 3 hours to put together! Very heavy but for an allocated space which won’t need moving. Enough desk space for too people. Instructions could be a little easier to follow but all in all a great product, a fraction of the cost of another company I looked at.. J. Exeter, GB. Fri Oct 25 2024

This modern, European single-size house bed comes with a side rail. The roof structure is included, and can be decorated with fabric to suit. The base is made of natural-coloured, solid pine wood. The headboard and footboard, as well as the side rail, all have a slatted design, with the slats sitting approximately 70mm apart. This means you can also use scatter cushions for extra support, turning the bed into a seat. It also includes a slatted frame. The mattress recess is approximately 4cm deep. It has a floor clearance of about 20cm. The headboard, footboard and side rail are approximately 65cm tall. The square bars of the roof structure are approximately 5cm W x 5cm D in size. The edge of the roof is 120cm high, rising to a total height of 170cm. The underbed drawer is included, and can be used for storing blankets and bed clothes. It has internal dimensions of approximately 17cm H x 90cm W x 194cm D. The drawer has a solid base, and has been coated to match the bed. The roller glides and two recessed handles on the front make it easy to pull out and push back in. The piece has a high-quality and sturdy finish. The fittings are made of metal. The mattress and accessories are not included. The product requires self-assembly, using the simple assembly instructions included. It measures approximately 170cm H x 210cm W x 97cm D in total.

Ruxandra. London, GB. Wed Mar 08 2023

This platform bed has many functions and, if necessary, can be changed into two beds, with lying surfaces of 90 x 200cm. It has one under the bed drawer, giving you everything you could need for your nursery. The components are made of coated engineered wood with grey edges. The top lying surface area is about 90 x 200cm. The max. mattress height is 20cm. Your child will remain safe in the top bed thanks to the protective rails. The bed is easy to access thanks to the attached ladder, which can be mounted on the right or the left. There is a dip at either end of the bed to help get into the bed. Under the top bed, there is a large metal work surface and compartments for books and other items. The work surface is at a height of about 67cm and has a depth of about 53cm. The distance from the work surface to the lower edge of the bed is 46cm. Underneath this, there is a second, pull-out bed with dimensions of 90 x 200cm. The insert depth for the mattress is about 12cm. The roller guide facilitates the pulling out and pushing in of the bed. Under the second bedroom, there is a bed box with a continuous lower plate, which can be used both as a storage space or as a third bed. The drawer size is about 90 x 190cm. The insert depth for the mattress is about 12cm. The drawer is also on wheels. The mattress is not included. The bed has many features in a small space, all that a child's room could need. The recommended minimum age of the child is 6 years. The space required for the bed is about 222cm W x 161cm H x 102cm D. The decoration, bed linen, and mattresses are not included. The article is delivered unassembled, with assembly instructions for customer assembly.

This is an absolutely amazing product. I know it’s a lot of money for a child’s bed but it’s worth it. Well built, very very practical with the slide out desk and trundle bed. The drawer at the bottom is huge for storage or even another mattress. It does need 2 people to install and takes a long time but the final product is just perfect. Whomever designed this needs a medal!. Patricia. Stony Stratford Milton Keynes, GB. Mon May 20 2019

This bed with bar edging, including a bed drawer. Made of solid pine with a milky pine finish. The natural surface is lightly pigmented in white. This pigmentation in the varnish means that the wood grain of the pine is still clearly visible, but no longer as yellowish as natural pine. The bed with a lying surface of approx. 90 x 200cm can be used universally in the children's room or guest room. The drawers under the bed surface can be easily operated through the handle opening and offer additional storage space. The item is characterized by high-quality workmanship and good stability. The bedposts measure approx, which gives you a more comfortable lying height. The individual rungs in the back and sides are approx 6cm wide and installed at a distance of approx 6.9cm. The practical bed drawer on castors is also included. The bed drawer are including floor panels with ventilation holes on which the mattress can be placed. Alternatively, the bed drawer can also be used as additional storage space for blankets or bed linen. The bed drawer can be easily pulled out and pushed in thanks to the roller guide. The item is disassembled with assembly instructions for easy self-assembly. The decoration and the mattress are not included. The depth when the bed drawer is pulled out is approx. 190cm.

Schönes Bett in guter Qualität. Würde ich wieder bestellen!. Jana. Thedinghausen, DE. Fri Nov 24 2023

Great my grandson loves this hard to get him out of the bedroom. Glenys. Eccles Manchester, GB. Thu Nov 24 2022

A great loft bed with a slide for playing and sleeping. Made of solid pine with a gray finish. The slide is a lot of fun to play with. A roll -up slatted frame is included. The ladder and slide can be mounted on the left or right. The surrounding fall protection, the wide steps for safe climbing up and down, as well as the high-quality workmanship and good stability, characterize this article. The space under the bed can be used for playing, or for storage. The height from the floor to the lower edge of the bed is approximately 70cm. Post thickness approx. 6.4 x 6.4cm, the bed sides and the fall protection are 2.0cm thick. The bed surface is 90 x 200cm. Required floor space approx. 210 x 218cm. Height 114cm. The item is disassembled with assembly instructions for easy self -assembly. Height from the upper edge of the bed to the upper edge of the fall protection: Approx. 36cm. Max. Mattress height approx. 20cm. Not suitable for children under 6 years of age. The decoration is not included. The decoration is not included. FSC® certified and built according to EN 747-2: 2012+A1 (2015).

Get your little ones racing to get ready for bed with this car-themed frame, brilliant for updating any room.

great quality as shown in the picture very pleased. Aysha. Ashley Heath Ringwood, . Sat Sep 26 2015

House bed Cabane's in-house look with the roof structure is a perfect choice. The stable construction distinguishes the article. The slatted frame of the bed is included. Since this is screwed to the frame support slats, there is also a distance to the floor, which allows air circulation. The product is made of high quality and stable. The mattress and decoration are not included. The goods are delivered disassembled, with assembly instructions for easy self-assembly.

Perfect transition from cot to the bed. Interactive and perfect design. Solid wood and long lasting colour. Fast delivery. Easy to assemble.. Maryia. London, GB. Tue Nov 28 2023

Very sturdy bed and easy assembly. Kirsty. Burley Ringwood, GB. Fri May 21 2021

This teepee bed with a lying surface of 90 x 200cm and a bed drawer on castors is something unusual for a child's room. It combines a full-fledged bed with a playful look. The upper crossbar can still be nicely decorated with textiles. The finish is solid pine, partly natural lacquered, and partly white lacquered. The item is characterized by high-quality workmanship and good stability. The bedposts measure approx. 60 x 30mm, the bedside is approx. 9cm high. An inlay depth of approx. 5cm is available for the mattress. The distance between the upper edge of the bedside and the 60mm thick upper crossbar is approx. 105cm. The bed drawer offers additional storage space for blankets or bed linen. The front and sides are made of natural, solid pine wood. The base plates are coated throughout and decorated. It is also suitable for a 90 x 190cm mattress, with a maximum mattress height of 17cm. Thanks to the roller guide and the two handle recesses in the front, it can be easily pulled out and pushed in. The product is of high quality and sturdy. The fittings are made of metal. When the bed drawer is pulled out, the depth is approx. 190cm.

Great bed! Quite sturdy and easy to put together. Tudor. London, GB. Mon Jul 04 2022

This mid-sleeper bed is made of solid pine wood and features a slide, making it the perfect place for playing and sleeping. The fabric set is included in the delivery and consists of a tunnel and a curtain featuring a princess design. The light tone of the fabric harmonizes wonderfully with the playful patterns of the princess theme. The front curtain has an open entranceway which is covered by a flap that can easily be rolled up. The fabric in this set is made of 100% cotton and can be washed at 30°C. The space underneath the bed is the perfect play area or can be used as a practical storage space. The ladder and slide can be installed on either the left or right side of the bed. This bed is characterized by its high-quality workmanship, stable construction, surrounding safety rails, and wide ladder rungs for safely climbing up and down.

Fab quality, my little one loves it so much and can’t wait to sleep in it. Leah. Bradford, GB. Fri Apr 16 2021

This mid-sleeper bed is made of solid pine wood and is the perfect place for playing and sleeping. The fabric set is included in the delivery and consists of a curtain featuring a princess design. The light tone of the fabric harmonizes wonderfully with the playful patterns of the princess theme. The front curtain has an open entranceway which is covered by a flap that can easily be rolled up. The fabric in this set is made of 100% cotton and can be washed at 30°C. The space underneath the bed is the perfect play area or can be used as a practical storage space. The ladder can be installed on either the left or right side of the bed. This bed is characterized by its high-quality workmanship, stable construction, surrounding safety rails, and wide ladder rungs for safely climbing up and down.

2cm longer than stated on description.other than that all ok .good and stable for that price.. Grasilda. London, GB. Tue May 18 2021

This cabin bed is perfect for both playing and sleeping. It's made of natural-coloured, solid pine wood. The included Birdy fabric curtain set has a playful, romantic style. It has a light beige background and features a floral pattern with butterflies and vines. The front curtain has an open entranceway which is covered by a flap that can easily be rolled up. They are made of 100% cotton and are washable at 30ºC. The space beneath the bed is the perfect play area, or can be used as practical storage space. The distance from the floor to the bottom of the bed is approximately 70cm. A slatted frame is included. The ladder can be attached on either the left or right side. The bed features all-round side rails and wide ladder steps for safety when climbing up and down, and is both well made and sturdy. The posts are approximately 6.5cm x 6.5cm thick. The bed is European single size. It requires approximately 210cm x 106cm of floor space. It's 114cm tall. The product requires self-assembly, using the simple assembly instructions included. FSC® certified and manufactured in accordance with EN 747-2:2012+A1(2015).

Arrived quickly, easy to assemble. Granddaughter loves her new bed. Rebecca. Balsall Common Coventry, GB. Sun Feb 11 2024

This mid-sleeper bed is the perfect place for both playing and sleeping. The fabric set is included in the delivery and consists of a curtain and three pockets featuring a princess design. The light tone of the fabric harmonizes wonderfully with the playful patterns of the princess theme. The front curtain has an open entranceway which is covered by a flap that can easily be rolled up. The fabric in this set is made of 100% cotton and can be washed at 30°C. The pockets feature different designs and can be attached to the safety rail using the included straps. The space underneath the bed is the perfect play area or can be used as a practical storage space. The ladder can be installed on either the left or right side of the bed. This bed is characterized by its high-quality workmanship, stable construction, surrounding safety rails, and wide ladder rungs for safely climbing up and down.

Easy to follow instructions and my daughter loves it.. Kirsty. Billinge Wigan, GB. Tue Aug 06 2019

House bed with lying area in 90 x 200cm, including roll -out slatted frame, roof structure, ladder and slide. The lattice windows in the bed sides are a very nice detail. The support material is partially solid pine, painted white. The bed posts are made of solid pine, the sides, side and roof panels are made of high-quality MDF. At the front, between the ladder and the slide, the bed has a fall protection in the appearance of rungs (distance between rungs approx. 60mm). The bed is open at the back. A slatted frame (15 slats) is already included in the delivery and the insertion depth for the mattress is approx. 4cm, max. Mattress height approx. 30cm. The sloping ladder with two handles and the slide can be built on the right or left. They are both approx. 35cm wide. The ground clearance is approx. 48.4cm, so the area under the bed can still be used as storage space. Entrance height (upper edge of the bed) is approx. 62.9cm. The front fall protection has a height of approx. 96.1cm. The square bars of the roof structure are approx. W: 4.5cm x D: 4.5cm. At the front, the roof edge has a height of 149cm and rises in the middle to a total height of 201.8cm. The gable is closed at the back. The product is of high quality and sturdy. The bed is not suitable for children under 6 years of age. Warning: The roof must not be climbed. The fittings are made of metal. The mattress and decoration are not included. The product is disassembled, with assembly instructions for easy self -assembly. Approximate footprint: 201.8cm H x 213cm W x 191.8cm D

Romantic house bed with bed drawer, from the Amori range with a bed surface in 90 x 200cm. The bed is a real highlight in the children's room and invites you to sleep, dream and play. The bed frame is made of solid pine wood. The sides are elaborately designed like a house facade in a planked look. The heart -shaped cut -outs on the right and left are a nice detail. The sides and roof panels are made of high -quality MDF, painted white. The bed is open at the front and back. A roll -out slatted frame is included. The side height of the bed is approx. 14.5cm, which gives a mattress insertion depth of approx. 8cm and the ground clearance is approx. 20cm. The square bars of the roof structure measure approx. 4.5cm W x 4.5cm D. Three wide struts are built into the roof structure, which provide additional stability. The roof must not be climbed or pulled up. At the front, the roof edge has a height of 122.9cm and rises to a total height of 171.7cm. Bed surface area: 171.7cm H x 213cm W x 98.7cm D In addition, a matching bed drawer with the inner dimensions of approx. 90 x 190cm in partially solid pine is included. The two heart -shaped cut -outs in the bed drawer front are a nice detail and at the same time make it easier to pull out and push in the bed drawer. The roller guide makes the drawer easy to use. The solid wood base plate allows you to use the drawer as additional storage space. The inner height of the bed drawer is approx. 12cm. Max. Load capacity approx. 50kg. Bed drawer storage area: 19.4cm H x 196cm W x 93.9cm D The product is of high quality and sturdy. The fittings are made of metal. The mattress and decoration are not included. The product is disassembled, with assembly instructions for easy self -assembly.

Super schön, sogar noch besser als wir uns vorgestellt haben. Unsere Kleine liebt das Bett. Und optisch einfach unschlagbar. Stefanie. Sehmatal, DE. Fri Jan 12 2024

This bunk play bed, including a slide, from the Pino collection, is an ideal bed for sleeping, playing, and dreaming. It combines the look of a half-height bed but at a lower-lying height. The bed is easier to reach for both the child and the parents. In addition, it can be used very well under sloping roofs, making better use of the space. The finish is painted white. It is fully equipped with a roll-up slatted frame, a slide, and a ladder. The surrounding fall protection, the wide step for safe climbing up and down, as well as the high-quality workmanship and good stability, characterize this article. The bed is not suitable for children under 6 years of age. The decoration, the shelf, and the mattress are not included. The item is disassembled with assembly instructions for easy self-assembly.

Es schaut super aus nur kleine Fehler die man lösen kann. Damla. Werther Westf, DE. Tue Oct 01 2024

This loft bed is ideal for the children's room. It has a lot of function in a small space and is made of solid pine, in the gray lacquered finish. The lying surface at the top is 90 x 200 cm and the ladder and the roller slatted frame are included. The upper lying surface has a 55 cm high circumferential fall protection. The ladder (35 cm wide) is slanted and can be mounted on the left or right. Wide steps for safe ascent and descent. The clear height under the bed is approx. 146 cm. The space under the bed is used for a large writing desk. It makes optimum use of the space and offers plenty of room as a work surface and shelf. The working height is approx. 75 cm and the legroom under the top is approx. 65 cm. The size of the top is approx. W: 205 x D: 65 cm. The bed has a high quality finish and is characterised by very good stability. The post thickness is approx. 6.4 x 6.4 cm, the bed sides and the fall protection are 2.0 cm thick. Footprint of loft bed: W: 209.4 H: 190 D: 98.6/164.5 cm (incl. ladder). The goods are disassembled for easy self-assembly. Max. Mattress height approx. 18.5 cm. Not suitable for children under 6 years. The decoration is not included. FSC® certified and built according to EN 747-1.

Fine colour, took a few deliveries to get all the parts. Rossella. GB. Mon Nov 28 2022

This loft bed with a slide invites you to play and sleep. It is made of solid pine and painted in the grey finish. The slide brings a lot of fun while playing and the ladder and slide can be mounted on the left or right. The textile set in the design "Astro", consisting of the curtain and 3 bags, is included. The basic colour is a blue colour, on which the pattern on the theme of space in great colour contrast. The front curtain has an opening that can be rolled up. The textiles are 100% cotton, washable at 30°. The pockets each have different motifs and are attached to the crash guard with the tabs. The space under the lying surface is great for playing or can be used as storage space. A roll-up slatted frame is included in the delivery. The ladder can be mounted on the left or right side. The all-round fall protection, the wide steps for safe climbing up and down, as well as the high-quality workmanship and good stability, distinguish this article. The article is disassembled with assembly instructions for easy self-assembly. Height from the top edge of the bedside to the top edge of the fall protection approx. 36 cm.

This bunk bed with 2 beds for the children's room. It is made from solid pine. The ladder and 2 roller slatted frames are included. The upper-lying surface has all-around fall protection. The ladder can be mounted on the left and right. The bunk bed can be converted into 2 single beds if required as the posts are divided. Wide steps ensure safe ascent and descent. The bed is of high quality and is characterized by very good stability. The practical bed drawer on wheels, from the Pino range, for sliding under the Pino single bed, is also included in the scope of delivery. The bed is made from solid, lacquered pine and comes with a base plate on which the mattress is placed. A mattress itself is not included. Thanks to the roller guide, it can be easily pulled out and pushed in. Not suitable for children under 6 years. The goods are disassembled for easy self-assembly. FSC®-certified and EN 747-2:2012+A1(2015) certified.

Really nice set of bunk beds. Stylish & easy to assemble.. Suzanne. London, GB. Sun May 02 2021

The loft bed with slide from the series Pino is an ideal bed for sleeping, playing and dreaming. The lying surface is 90 x 200 cm. It is made of solid pine and has a post thickness of 64 x 64 mm. The finish is lacquered. It is fully equipped, with a roll-up slatted frame, the ladder and a slide. The textile set in the design "Pet Shop", consisting of the curtain with the great representation of a fire engine, is also included. The textiles are 100% polyester, washable at 30°. The slide brings a lot of fun while playing, it is an adventure playground for every child's room. The ladder (approx. 35 cm wide) and the slide (approx. 39 cm wide) can be mounted on the left or right. The all-round fall protection, the wide steps for safe climbing up and down, as well as the high-quality workmanship and good stability, distinguish this article. The height from the upper edge of the bed side to the upper edge of the fall protection is approx. 36 cm, with a max. mattress height of approx. 20 cm. The space under the bed can be used for playing or as storage space. The height from the floor to the lower edge of the bed side is approx. 72 cm. The distance between ladder and slide is approx. 118 cm. As floor space in the room you need approx. W: 210 x D: 218 cm. The height is approx. 114 cm. The bed is not suitable for children under 6 years. The decoration and the mattress are not included. The article is disassembled with assembly instructions for easy self-assembly. FSC® certified and built according to EN 747-2:2012+A1(2015).

Das Bett ist sehr stabil und wurde sofort begeistert genutzt. Die Rutsche ist ein Highlight und die Höhle unten sehr praktisch zum Verstecken oder Spielsachen verstauen. Es ist leicht von einer Person aufzubauen.. Anonymous. Velburg, DE. Sun Dec 17 2023

With its included slide, this cabin bed is perfect for both playing and sleeping. It's made of natural-colored, solid pine wood. Playing on the slide is great fun, and both the ladder and slide can be attached on either the left or right. Playing on the slide is great fun, and both the ladder and slide can be attached on either the left or right. The included Birdy fabric curtain set has a playful, romantic style. It has a light beige background and features a floral pattern with butterflies and vines. The front curtain has an open entranceway which is covered by a flap that can easily be rolled up. They are made of 100% cotton and are washable at 30ºC. The space beneath the bed is the perfect play area or can be used as a practical storage space. The distance from the floor to the bottom of the bed is approximately 70cm. A slatted frame is included. The ladder can be attached on either the left or right side. The bed features all-round side rails and wide ladder steps for safety when climbing up and down, and is both well made and sturdy. The posts are approximately 6.5cm x 6.5cm thick. The bed is European single size. It requires approximately 210cm W x 218cm D of floor space. It's 114cm tall. The product requires self-assembly, using the simple assembly instructions included. FSC® certified and manufactured in accordance with EN 747-2:2012+A1(2015).

Bought it for our four years old and she absolutely loves it! Easy to put together and lots of room for her to play underneath. We also added some fairy lights under it!. Anonymous. Shifnal, GB. Thu Jun 04 2020

The bunk play bed with a shelf for hanging and 3 spacious drawers, from the Pino collection is an ideal bed for sleeping, playing, and dreaming. It combines the look of a half-height bed but at a lower-lying height. The bed is easier to reach for both the child and the parents. In addition, it can be used very well under sloping roofs, making better use of the space. The bed is made of solid pine and has a post thickness of 55 x 55mm. The finish is painted gray. It has a surface area of 90 x 200cm and is fully equipped with a roll-up slatted frame and a ladder. The ladder (approx. 35cm wide) can be mounted on the left or right. The surrounding fall protection, the wide step for safe climbing up and down, as well as the high-quality workmanship and good stability, characterize this article. The height from the top edge of the bedside to the top edge of the fall protection is approx. 32cm, with a maximum mattress height of approx. 20cm. The small shelf on the fall protection is included. It can be universally hung on the side with the two metal hooks. The side panels have a height of approx. 7cm. You can also place books on the upper surfaces. The maximum load capacity is 2kg. The dimensions are approximately 79.3cm H x 9cm W x 21.2cm D. The space under the bed is used for the drawer set of 3 containers and creates order in the children's room. Everything finds its right place here and it looks tidy in no time. The drawers are made of high-quality MDF and painted gray. They run on castors and have a handle recess, which makes them easy to move. The inner dimensions of the drawers are approximately: W: 42.4cm x H: 29.3cm x D: 56.6cm. The front of the drawer is rounded at the corners and has a floor clearance of approx. 1.5cm. The storage space per drawer is approximately 49.6cm W x 39.6cm H x 60cm D. The distance between the ladder and the bedpost is approximately 157cm. The required floor space in the room is approximately 207.6cm W x 104.9cm D. The height is approx. 83cm. The bed is not suitable for children under 6 years of age. The decoration, the shelf, and the mattress are not included. The item is disassembled with assembly instructions for easy self-assembly.

Good quality, easy to put together and delivered on time. Kerri. St. Albans, GB. Mon May 06 2024

This mid sleeper bed is the perfect place for both playing and sleeping, made of solid pine wood. The decorative fabric set featuring a space design is included. The dark blue tone of the fabric fits in wonderfully with the playful space theme design and patterns. The front curtain has an open entranceway which is covered by a flap that can easily be rolled up. The fabric in this set is made of 100% cotton and can be machine washed at 30°C. The space underneath the bed is the perfect play area or it can be used as practical storage space. The ladder can be mounted on the left or right. The surrounding bed rails, wide ladder rungs for safely climbing up and down, and the high-quality workmanship along with the stable construction all make this bed stand out.

Great little bed. Really easy to put up and it feels really solid, fixings seem of a good quality as well and no parts were missing. The bed is a bit pricey but well worth the money, my son loves it and he actually looks forward to bedtime for a change.. Emma. Dudley, GB. Mon Oct 17 2022

Bunk bed made of solid beech, with bed surface in 90 x 200cm, side border and bed drawer. A solid roll -up slatted frame with 15 slats is included. The base material is solid beech, painted white. The high -quality selection of the material is reflected in the use of wood and the workmanship. The black screws are visible and set an optical accent. The headboard, footboard and backrest have a finely crafted rung look. The round bars have a thickness of approx. 16mm. This means that conversion cushions can also be used, which can be used as a seat. The inlay depth for the mattress is approx. 6cm. The ground clearance is approx. 20cm and the entry height (upper edge of the bed) approx. 33cm. The head/foot/backrest has a height of approx. 68cm. The strong square posts measure approximately 5.5cm W x 5.5cm D, with a solid wood cap at the top. The bed drawer on castors is also included. It has an interior dimensions of approx. 195.2cm W x 12cm H x 90cm D and offers additional storage space for blankets or bed linen, but can also be used as an additional bed. Mattress height is 12cm. The roller guide makes it easy to pull out and push in. The front and sides are made of solid beech, the base plates are coated throughout and decor. Bed drawer floor space: Approx. 195.2cm W x 16.6cm H x 94cm D The product is high -quality and sturdy, and the fittings are made of metal. The mattress and decoration are not included. The product is disassembled, with assembly instructions for easy self -assembly. Bunk bed footprint: 68cm H x 207.5cm W x 97.5cm D (+94cm bed drawer).

The bunk play bed includes a slide and a shelf for hanging as well as 2 spacious drawers, from the Pino collection is an ideal bed for sleeping, playing, and dreaming. It combines the look of a half-height bed but at a lower-lying height. The bed is easier to reach for both the child and the parents. In addition, it can be used very well under sloping roofs, making better use of the space. The bed is made of solid pine and has a post thickness of 55 x 55mm. The finish is painted white. It has a surface area of 90 x 200cm and is fully equipped with a roll-up slatted frame, a slide, and a ladder. The ladder/slide is approx. 35cm wide and can be mounted on the left or right. The surrounding fall protection, the wide step for safe climbing up and down, as well as the high-quality workmanship and good stability, characterize this article. The height from the top edge of the bedside to the top edge of the fall protection is approx. 32cm, with a maximum mattress height of approx. 20cm. The small shelf on the fall protection is included. It can be universally hung on the side with the two metal hooks. The side panels have a height of approx. 7cm. You can also place books on the upper surfaces. The maximum load capacity is 2kg. The dimensions are approximately 79.3cm H x 9cm W x 21.2cm D. The space under the bed is used for the set of drawers consisting of 2 containers and creates order in the children's room. Everything finds its right place here and it looks tidy in no time. The drawers are made of high-quality MDF and painted white. They run on castors and have a handle recess, which makes them easy to move. The inner dimensions of the boxes are approx. 48.6cm W x 29.3cm H x 56.6cm D. The front of the drawer is rounded at the corners and has a floor clearance of approx. 1.5cm. The storage area per drawer is approximately 55.8cm W x 39.6cm H x 60cm D. The distance between the ladder and the slide is approx. 118.4cm. The required floor space in the room is approximately 207.6cm W x 175cm D. The height is approx. 83cm. The bed is not suitable for children under 6 years of age. The decoration, the shelf, and the mattress are not included. The item is disassembled with assembly instructions for easy self-assembly.

Unsere Tochter ist ganz begeistert von ihrem neuen Hochbett mit Rutsche. Aufgrund einer Dachschräge haben wir uns für dieses Bett entschieden. Es ließ sich sogar nur von 1 Person aufbauen. Es passt perfekt in unsere Schräge. Die Lieferung kam sogar vor den ursprünglichen Datum.. Manuela. Höchenschwand, DE. Wed Nov 29 2023

This practical, Pino European Single Bunk Bed with Drawers is made of solid pine wood and is ideal for the children's room. The top bunk features a surrounding rail for extra security, while the ladder has wide steps for safe ascending and descending. The ladder can be mounted on either the left or right side. Two additional under-bed drawers are also included in the delivery and offer plenty of storage space. If needed, the bunk bed can be dismantled into two single beds as the posts are separable. This bed is manufactured to a high quality and is characterised by its robustness. Not suitable for children under 6 years of age. This bed comes in two pieces with assembly instructions for easy self-assembly.

I ordered two of these bunk beds for my daughters. They have been using it for a year and it is still sturdy and strong like day 1, we hear no noise of any loose screws or sweeks. My daughters are satisfied with the quality and get comfortable good nights sleep.. Roqia. Luton, GB. Mon Nov 30 2020

This bunk bed with a slide and two spacious drawers from the Pino collection is an ideal bed for sleeping, playing, and dreaming. It combines the look of a half-height bed but at a lower-lying height. The bed is easier to reach for both the child and the parents. In addition, it can be used very well under sloping roofs, making better use of the space. The bed is made of solid pine and has a post thickness of 55 x 55 mm. The finish is painted white. It has a surface area of 90 x 200 cm and is fully equipped with a roll-up slatted frame, a slide, and a ladder. The ladder/slide is approx. 35 cm wide and can be mounted on the left or right. The surrounding fall protection, the wide step for safe climbing up and down, as well as the high-quality workmanship and good stability, characterize this article. The height from the top edge of the bedside to the top edge of the fall protection is approx. 32cm, with a maximum mattress height of approx. 20cm. The space under the bed is used for the set of drawers consisting of 2 containers and creates order in the children's room. Everything finds its right place here and it looks tidy in no time. The drawers are made of high-quality MDF and painted white. They run on castors and have a handle recess, which makes them easy to move. The inner dimensions of the boxes are approximately: W: 29.3cm x H: 56.6cm. The front of the drawer is rounded at the corners and has a floor clearance of approx. 1.5cm. The storage area per drawer is approximately 55.8cm W x 39.6cm H x 60cm D. The distance between the ladder and the slide is approx. 118.4cm. The required floor space in the room is approximately 207.6cm W x 175cm D. The height is approx. 83cm. The bed is not suitable for children under 6 years of age. The decoration, the shelf, and the mattress are not included. The item is disassembled with assembly instructions for easy self-assembly.

Das Bett wurde recht schnell geliefert und war auch sehr gut verpackt. Qualitativ habe ich nichts zu beanspruchen, außer einer kleinen Delle in einem Brett, die mich persönlich nicht stört. Auch die Aufbauanleitung war verständlich dargestellt. Kann ich absolut weiterempfehlen. Anonymous. Sun Dec 10 2023

The teepee bed with a bed surface of 90 x 200cm and bed drawer on castors, including the textile tent roof, is something unusual for the children's room. It combines a full-fledged bed with a playful look. The finish is solid pine, partly natural lacquered, and partly white lacquered. A roll-out slatted frame with 17 slats is included. The item is characterized by high-quality workmanship and good stability. The bed posts measure approx. 60 x 30mm, the bedside is approx. 9cm high. The distance from the floor to the top of the bed is 29cm. An inlay depth of approx. 5cm is available for the mattress. The distance between the upper edge of the bedside and the 60mm thick upper crossbar is approx. 105cm. The textile tent roof is particularly chic in light gray with a white zigzag pattern at the top. With a large opening at the front, a round window opening (approx. 25cm) on the right and left, and an open at the side. The tent roof is closed at the back and attached to the sides of the bed with hook and loop fasteners. The fabric is made of 100% polyester and can be cleaned during cleaning - it is not washable. The bed drawer offers additional storage space for blankets or bed linen. The front and sides are made of natural solid pine. It has internal dimensions of approx. 194cm W x 17cm H x 90cm D. The base plates are coated throughout and decorated. It is also suitable for a 90 x 190cm mattress, with a maximum mattress height of 17cm. Thanks to the roller guide and the two handle recesses in the front, it can be easily pulled out and pushed in. The product is of high quality and sturdy. The fittings are made of metal. Required floor space approx. W: 206cm x H: 158.2cm x D: 98cm. When the bed drawer is pulled out, the depth is approx. 190cm. The item is disassembled, with assembly instructions for easy self-assembly. The decoration and the mattress are not included. The item is not suitable for children under 4 years of age. FSC® certified.

Lovely bed - exactly as imagined but took forever to come! Do not believe estimated delivery date!. Carolyn. Eastbourne, GB. Sun Apr 21 2024

The teepee-look bed, including the textile tent roof, is something unusual for the children's room. Since this is screwed to the frame support slats, there is also a distance to the floor, which allows air circulation. The frame is made of solid pine (60 x 30mm), with the upper tips and the cross-bracing (approx. 60mm high) painted white. The same goes for the bed frame (approx. 11.7cm high), which offers an insertion depth of approx. 4.5cm for the mattress. The textile tent roof is particularly chic, in light grey with a white zigzag pattern at the top. With a large opening at the front (approx. 100cm wide and 80cm high), on the right and left with around window opening (approx. 25cm), and open at the side. The tent roof is closed at the back and attached to the sides of the bed with hook and loop fasteners. The fabric can be cleaned during cleaning - it is not washable. The fittings are made of metal.

Top Qualität guter Preis was will man mehr !!!. Gökan. Ingolstadt, DE. Wed Apr 10 2024

It is not a week since I built this bed for my 4 year old. He really likes, and has had no problems getting used to it for sleeping and playing. The construction is first rate, and it is clear that care and attention has gone into every step. Different types of wood and joint are used, each one carefully selected for the job at hand. It took 3-4 hours for me to build it on my own: give yourself plenty of time! We were expecting the bed to come with a curtain, as you see in the online images, but this was not the case. Overall, we are very pleased to have chosen this bed, along with one of the recommended mattresses, and expect to use them for many years to come.. Anonymous. Sat Jan 14 2023

This European single-size mid-sleeper bed has a cabin-like design. It's your child's very own adventure playground. The base is made of high-quality, white-painted MDF. With their sturdy corners, the legs keep the bed very stable. Attached to the side, the ladder lets you child climb into the high bed with ease. The ladder is approximately 9cm deep, and can be attached on either the left or right. It also features hand holes at the top, letting your child hold on. The wide side rails provide an extra layer of safety. A slatted frame for the mattress is included. The mattress is not included. The recess for the mattress is approximately 12cm deep. The space beneath the bed is the perfect play area. The central doorway is approximately 79.5cm H x 64.5cm W. Round, 30cm-diameter windows sit to the left and right of the doorway. The headboard and footboard are enclosed. The bed is open at the back, on the wall side. This is a high-quality product with metal fittings. The mattress and accessories are not included. The product requires self-assembly, using the simple assembly instructions included. It measures approximately 120cm H x 206cm W x 96cm D, with an additional 9cm W for the ladder.

Came in good time and very good condition Great bed looks beautiful and my little Girl loves playing underneath it with lots of space to store her toys and. P. Leeds, GB. Fri Nov 06 2020

This half loft bed with slide invites you to play and sleep. It is made from solid pine. The slide provides lots of fun while playing. The textile set in the "Spring" design, consisting of the curtain and 3 bags, is included. The floral pattern stands out beautifully against the light colour. The front curtain has an opening that can be rolled up. The textiles are 100% cotton and washable at 30 °C. The pockets each have different motifs and are attached to the crash guard using the tabs. The space under the lying surface is great for playing or can be used as storage space. The ladder and slide can be fitted on the left or right. The all-round fall protection, the wide steps for climbing up and down safely as well as the high-quality workmanship and good stability characterise this item.

My daughter loves the bed but the only downside was that it was a bit difficult as I assemble it myself. The numbers that was meant to distinguish the boards was not there and have to think what goes where.. Letitia. Worthing, GB. Thu Feb 06 2020

The mid -height bed from the Scott collection, with a slide and a bed surface of 90 x 200cm, is ideal for playing and sleeping. An adventure playground in the children's room. The item is made of solid pine and the surface is painted white. The textile set in the design "Fire Rescue", consisting of the curtain with the great depiction of a fire engine, is also included. The textiles are 100% polyester and washable at 30 ° C. The imaginative design makes playing a lot of fun. A roll -out slatted frame with 15 slats (approx. W: 70mm x H: 1.7mm) is included. The fall protection provides additional safety and has a rung look at the front, while at the back it consists of two panels. The distance from the floor to the top edge of the fall protection is 114cm, the entrance height to the top of the bed is approx. 81.5cm and the height from the top of the bed to the top of the fall protection is approx. 32cm. The headboard and footboard have a closed panel with a milled ornamentation on the outside. The panel is smooth on the inside. The ladder tower with a slide is special. For space -saving reasons, the slide runs at a 33 ° angle to the bed as shown. It can run to the right or left by mounting the parts of the fall protection in a mirrored manner. The approx. 35cm wide steps ensure safe climbing up and down. In addition, the ladder has handle holes that are great for holding onto. The space under the bed, from the floor to the lower edge of the bed, is approx. 72.5cm high and can still be used as storage space. The high -quality workmanship and very good stability characterize this bed. The post thickness is approx. 55.5 x 55.5mm. Max. Mattress height approx. 20cm. Not suitable for children under 6 years of age. The product is disassembled for easy self -assembly. The mattress, pillows and decorations are not included. FSC® certified and built according to EN 747-2: 2012+A1 (2015). Required floor space approx. W: 207.6 x H: 114 x D: 203.7cm.

This loft bed with a slide invites you to play and sleep. It is made of solid pine and painted in a grey finish. The slide brings a lot of fun while playing and the ladder and slide can be mounted on the left or right. The textile set in the design "Birdy" with its playful romantic look, consists of a curtain and 3 bags, is included. The basic colour is white, on which the floral pattern with butterflies and tendrils stands out as a great colour. The pockets have a basic colour pink. The front curtain has a passage that can be rolled up. The textiles are 100% cotton, washable at 30 °. The pockets each have different motifs and are attached to the crash guard with the tabs. The space under the lying surface is great for playing or can be used as storage space. A roll-up slatted frame is included in the delivery. The ladder can be mounted on the left or right side. The all-round fall protection, the wide steps for safe climbing up and down, as well as the high-quality workmanship and good stability, distinguish this article. The article is disassembled with assembly instructions for easy self-assembly. Height from the top edge of the bedside to the top edge of the fall protection approx. 36 cm.

Unbekannt. Deutschland. Thu Jan 02 2014

my 4 year old son loves it. Anonymous. Bridgwater, GB. Sat Nov 14 2020