Grey Vipack Toddler Beds

This bunk loft bed with 2 sleeping accommodations for the children's room has a special height of 182 cm. It is made of solid pine, in a gray lacquered finish. The lying surfaces are each 90 x 200 cm and the ladder and 2 roll-up slatted frames are included. The upper-lying surface has circumferential fall protection. The ladder can be mounted on the left or right. The bunk bed can be converted back into 2 single beds if required as the posts are split. The distance between the lying surfaces is approx. 110 cm, the ground clearance approx. 20 cm. Wide steps for safe climbing up and down. The bed has a high-quality finish and is characterized by very good stability. The post thickness is approx. 6.4 x 6.4 cm, the bedsides, and the fall protection are 2.0 cm thick. Product dimensions: W: 210 H: 182 D: 105 cm. The product is disassembled for easy self-assembly. Max. Mattress height approx. 20 cm. Wall mounting is required. Not suitable for children under 6 years. The decoration is not included. FSC® certified and built according to EN 747-2:2012+A1(2015).

Anonymous. Mon Oct 07 2024

White

The loft bed from the series Pino is an ideal bed for sleeping, playing and dreaming. The lying surface is 90 x 200 cm. It is made of solid pine and has a post thickness of 64 x 64 mm. The finish is lacquered. It is fully equipped, with a roll-up slatted frame and the ladder. The textile set in the design "Police", consisting of the curtain with the great representation of a fire engine, is also included. The textiles are 100% polyester, washable at 30°. The imaginative design brings a lot of fun while playing, it is an adventure playground for every child's room. The ladder (approx. 35 cm wide) can be mounted on the left or right. The all-round fall protection, the wide steps for safe climbing up and down, as well as the high-quality workmanship and good stability, distinguish this article. The height from the upper edge of the bed side to the upper edge of the fall protection is approx. 36 cm, with a max. mattress height of approx. 20 cm. The space under the bed can be used for playing or as storage space. The height from the floor to the lower edge of the bed side is approx. 72 cm. The distance between ladder and bedpost is approx. 157 cm. As floor space in the room you need approx. W: 210 x D: 106 cm. The height is approx. 114 cm. The bed is not suitable for children under 6 years. The decoration and the mattress are not included. The article is disassembled with assembly instructions for easy self-assembly. FSC® certified and built according to EN 747-2:2012+A1(2015).

Grey

Article set MODULO consists of two single and stacking beds. They combine smart design and space-saving solutions. These two beds offer you the comfort of a single bed for the children's room or guest room. It is designed so that two beds can be placed on top of each other. Ideal for small spaces. The single bed has a lying surface of 90 x 200 cm and the slatted frame is already included (16 slats approx. 70 mm wide with 56 mm spacing). The support material is 1.8 cm thick and 16 cm bed sides made of high-quality MDF, painted grey. The corners of the bed sides are rounded. The interesting foot form in smiley star optics, sets optical accents with the bed. The feet are made of 20mm thick, solid pine and natural lacquered. They are worked in such a way that they interlock when the beds are stacked. Whether used individually or stacked, they always provide the bed with a high level of stability and sturdiness. The bed is also ideal for use under sloping ceilings. It has a total height of approx. 27.5 cm from the floor to the upper edge of the bed side. The floor clearance is approx. 11.5 cm, the insertion depth for the mattress approx. 11 cm, with a max. mattress height of approx. 18 cm. The delivery includes 2 beds, the decoration and mattress is not included. The article is stable and of high quality. The product is disassembled for easy self-assembly. Footprint approx: W: 203.6 x H: 27.5 x D: 93.8 cm. Stacked, the height of the two beds is approx. 55 cm.

This junior bed with bed drawer is an ideal interim solution for your child when they are already standing up on their own. Nevertheless, it is protected at night by the horizontal panels of the fall-out protection. Every child will enjoy it and the bed invites you to dream and cuddle. The bed surface is 70 x 140cm. A roll-out slatted frame with 11 slats is included. The body is made of high-quality MDF, painted light grey and very stable due to the 9cm wide feet. The circumferential fall protection has a height from the floor to the top of the panel of approx. 56cm. At the front, it is approx. 48cm high. The entrance to the bed is approx. 50cm wide, with an entrance height of approx. 25cm. Depending on the installation, the entrance can be on the right or the left. The bed has a ground clearance of approx. 16cm. An inlay depth of approx. 5cm is available for the mattress. The practical bed drawer for sliding under the junior bed from Vipack is included. It is made of high-quality MDF, painted light grey. The base plates are made of wood-based material and coated in light grey melamine. The roller guide makes it easy to pull out or push in the drawer. It can be used as additional storage space for blankets or bed linen. It is not suitable as an additional bed surface. The inside dimensions of the drawer are approximately 133.5cm W x 12cm H x 70cm D. The fittings are made of metal and the item is sturdy and high-quality. The product is disassembled and easy to assemble with detailed assembly instructions. The item is not suitable for children under 4 years of age. The mattress and the decorations are not included. The floor space of the junior bed is approximately 148cm W x 60cm H x 76cm D. When the bed drawer is pulled out, the depth is approx. 150cm.

This chic bunk bed with 2 sleeping accommodations for the children's room, is practical and space-saving. It is made of solid pine, in the gray lacquered finish. The lying surfaces are each 90 x 200 cm and the ladder and 2 roll-up slatted frames are included. The upper lying surface has a circumferential fall protection. The ladder can be mounted on the left or right. In addition, the two shoulder trays under the bed are included. These can be used as additional storage space. The bunk bed can be converted back into 2 single beds if required as the posts are split. Wide steps for safe climbing up and down. The bed has a high quality finish and is characterized by very good stability. The distance between the lying surfaces is approx. 68 cm, the ground clearance approx. 20 cm. The post thickness is approx. 6.4 x 6.4 cm, the bed sides and the fall protection are 2.0 cm thick. Product dimensions: W: 210 H: 140 D: 105 cm. The product is disassembled for easy self-assembly. Max. Mattress height approx. 20 cm. Wall mounting is required. Not suitable for children under 6 years. The decoration is not included. FSC® certified and built according to EN 747-2:2012+A1(2015).

This bunk loft bed with 2 sleeping accommodations for the children's room has the height of 140 cm. It is made of solid pine, in the gray lacquered finish. The lying surfaces are each 90 x 200 cm and the ladder and 2 roll-up slatted frames are included. The upper lying surface has a circumferential fall protection. The ladder can be mounted on the left or right. The bunk bed can be converted back into 2 single beds if required as the posts are split. Wide steps for safe climbing up and down. The bed has a high quality finish and is characterised by very good stability. The practical bed drawer on rollers is also included. The finish is pine grey lacquered. The internal dimensions of the bed drawer are W: 195 x H: 10 D: 90 cm, including a base plate on which the mattress is placed. A mattress itself is not included in the delivery. Due to the roller guide it can be easily pulled out and pushed in. The distance between the lying surfaces is approx. 68 cm, the ground clearance approx. 20 cm. The post thickness is approx. 6.4 x 6.4 cm, the bed sides and the fall protection are 2.0 cm thick. Product dimensions: W: 210 H: 140 D: 105 + 90 cm for the extended bed drawer. The product is disassembled for easy self-assembly. Max. Mattress height approx. 20 cm. Not suitable for children under 6 years. The decoration is not included. FSC® certified and built according to EN 747-2:2012+A1(2015).

Grey

The MODULO single and stacking bed combines smart design and space-saving solutions. This bed offers you the comfort of a single bed for the children's room or guest room. It is designed so that two or three beds can be placed on top of each other. Ideal for small spaces. The single bed has a lying surface of 90 x 200 cm and the slatted frame is already included (16 slats approx. 70 mm wide with 56 mm spacing). The support material is 1.8 cm thick and 16 cm bed sides made of high-quality MDF, painted grey. The corners of the bed sides are rounded. The interesting foot form in puzzle optics, sets optical accents with the bed. The feet are made of 20mm thick, solid pine and natural lacquered. They are worked in such a way that they interlock when the beds are stacked. Whether used individually or stacked, they always provide the bed with a high level of stability and sturdiness. The bed is also ideal for use under sloping ceilings. It has a total height of approx. 27.5 cm from the floor to the upper edge of the bed side. The floor clearance is approx. 11.5 cm, the insertion depth for the mattress approx. 11 cm, with a max. mattress height of approx. 18 cm. Scope of delivery is 1 bed, the decoration and mattress is not included. The article is stable and of high quality. The product is disassembled for easy self-assembly. Footprint approx: W: 203.6 x H: 27.5 x D: 93.8 cm.

This junior bed is an ideal interim solution for your child when they get up on their own. Nevertheless, it is protected at night by the horizontal panels of the fall-out protection. Every child will enjoy it and the bed invites you to dream and cuddle. The bed surface is 70 x 140cm. A roll-out slatted frame with 11 slats is included. The body is very stable due to the 9cm wide feet. The circumferential fall protection has a height from the floor to the top of the panel of approx. 56cm. At the front, it is approx. 48cm high. The entrance to the bed is approx. 50cm wide, with an entrance height of approx. 25cm. Depending on the installation, the entrance can be on the right or the left. The bed has a ground clearance of approx. 16cm. An inlay depth of approx. 5cm is available for the mattress. The mattress and the decoration are not included.

Grey

Article set MODULO consists of two single and stacking beds. They combine smart design and space-saving solutions. These two beds offer you the comfort of a single bed for the children's room or guest room. It is designed so that two beds can be placed on top of each other. Ideal for small spaces. The single bed has a lying surface of 90 x 200 cm and the slatted frame is already included (16 slats approx. 70 mm wide with 56 mm spacing). The support material is 1.8 cm thick and 16 cm bed sides made of high-quality MDF, painted grey. The corners of the bed sides are rounded. The interesting foot form in puzzle optics, sets optical accents with the bed. The feet are made of 20mm thick, solid pine and natural lacquered. They are worked in such a way that they interlock when the beds are stacked. Whether used individually or stacked, they always provide the bed with a high level of stability and sturdiness. The bed is also ideal for use under sloping ceilings. It has a total height of approx. 27.5 cm from the floor to the upper edge of the bed side. The floor clearance is approx. 11.5 cm, the insertion depth for the mattress approx. 11 cm, with a max. mattress height of approx. 18 cm. The delivery includes 2 beds, the decoration and mattress is not included. The article is stable and of high quality. The product is disassembled for easy self-assembly. Footprint approx: W: 203.6 x H: 27.5 x D: 93.8 cm. Stacked, the height of the two beds is approx. 55 cm.

Oak

The loft bed from the series Pino is an ideal bed for sleeping, playing, and dreaming. The lying surface is 90 x 200 cm. It is made of solid pine and has a post thickness of 64 x 64 mm. The finish is lacquered. It is fully equipped, with a roll-up slatted frame and a ladder. The textile set in the design "Space Shuttle", consisting of the curtain with the great representation of a fire engine, is also included. The textiles are 100% polyester, and washable at 30°. The imaginative design brings a lot of fun while playing, it is an adventure playground for every child's room. The ladder (approx. 35 cm wide) can be mounted on the left or right. The all-around fall protection, the wide steps for safe climbing up and down, as well as the high-quality workmanship and good stability, distinguish this article. The height from the upper edge of the bedside to the upper edge of the fall protection is approx. 36 cm, with a max. mattress height of approx. 20 cm. The space under the bed can be used for playing or as storage space. The height from the floor to the lower edge of the bedside is approx. 72 cm. The distance between the ladder and the bedpost is approx. 157 cm. As for floor space in the room you need approx. W: 210 x D: 106 cm. The height is approx. 114 cm. The bed is not suitable for children under 6 years. The decoration and the mattress are not included. The article is disassembled with assembly instructions for easy self-assembly. FSC® certified and built according to EN 747-2:2012+A1(2015).

Grey

The MODULO single and stacking bed combines smart design and space-saving solutions. This bed offers you the comfort of a single bed for the children's room or guest room. It is designed so that two or three beds can be placed on top of each other. Ideal for small spaces. The single bed has a lying surface of 90 x 200 cm and the slatted frame is already included (16 slats approx. 70 mm wide with 56 mm spacing). The support material is 1.8 cm thick and 16 cm bed sides made of high-quality MDF, painted grey. The corners of the bed sides are rounded. The interesting foot form in smiley star optics, sets optical accents with the bed. The feet are made of 20mm thick, solid pine and natural lacquered. They are worked in such a way that they interlock when the beds are stacked. Whether used individually or stacked, they always provide the bed with a high level of stability and sturdiness. The bed is also ideal for use under sloping ceilings. It has a total height of approx. 27.5 cm from the floor to the upper edge of the bed side. The floor clearance is approx. 11.5 cm, the insertion depth for the mattress approx. 11 cm, with a max. mattress height of approx. 18 cm. Scope of delivery is 1 bed, the decoration and mattress is not included. The article is stable and of high quality. The product is disassembled for easy self-assembly. Footprint approx: W: 203.6 x H: 27.5 x D: 93.8 cm.

Oak

The loft bed from the series Pino is an ideal bed for sleeping, playing, and dreaming. The lying surface is 90 x 200 cm. It is made of solid pine and has a post thickness of 64 x 64 mm. The finish is lacquered. It is fully equipped, with a roll-up slatted frame and a ladder. The textile set in the design "FIRE RESCUE", consisting of the curtain with the great representation of a fire engine, is also included. The textiles are 100% polyester, and washable at 30°. The imaginative design brings a lot of fun while playing, it is an adventure playground for every child's room. The ladder (approx. 35 cm wide) can be mounted on the left or right. The all-around fall protection, the wide steps for safe climbing up and down, as well as the high-quality workmanship and good stability, distinguish this article. The height from the upper edge of the bedside to the upper edge of the fall protection is approx. 36 cm, with a max. mattress height of approx. 20 cm. The space under the bed can be used for playing or as storage space. The height from the floor to the lower edge of the bedside is approx. 72 cm. The distance between the ladder and the bedpost is approx. 157 cm. As for floor space in the room, you need approx. W: 210 x D: 106 cm. The height is approx. 114 cm. The bed is not suitable for children under 6 years. The decoration and the mattress are not included. The article is disassembled with assembly instructions for easy self-assembly. FSC® certified and built according to EN 747-2:2012+A1(2015).

Grey

Article set MODULO consists of two single and stacking beds. They combine smart design and space-saving solutions. These two beds offer you the comfort of a single bed for the children's room or guest room. It is designed so that two beds can be placed on top of each other. Ideal for small spaces. The single bed has a lying surface of 90 x 200 cm and the slatted frame is already included (16 slats approx. 70 mm wide with 56 mm spacing). The support material is 1.8 cm thick and 16 cm bed sides made of high-quality MDF, painted grey. The corners of the bed sides are rounded. The interesting foot form in arrow optics, sets optical accents with the bed. The feet are made of 20mm thick, solid pine and natural lacquered. They are worked in such a way that they interlock when the beds are stacked. Whether used individually or stacked, they always provide the bed with a high level of stability and sturdiness. The bed is also ideal for use under sloping ceilings. It has a total height of approx. 27.5 cm from the floor to the upper edge of the bed side. The floor clearance is approx. 11.5 cm, the insertion depth for the mattress approx. 11 cm, with a max. mattress height of approx. 18 cm. The delivery includes 2 beds, the decoration and mattress is not included. The article is stable and of high quality. The product is disassembled for easy self-assembly. Footprint approx: W: 203.6 x H: 27.5 x D: 93.8 cm. Stacked, the height of the two beds is approx. 55 cm.

Oak

The loft bed from the series Pino is an ideal bed for sleeping, playing and dreaming. The lying surface is 90 x 200 cm. It is made of solid pine and has a post thickness of 64 x 64 mm. The finish is lacquered. It is fully equipped, with a roll-up slatted frame and the ladder. The textile set in the design "Pet Shop", consisting of the curtain with the great representation of a fire engine, is also included. The textiles are 100% polyester, washable at 30°. The imaginative design brings a lot of fun while playing, it is an adventure playground for every child's room. The ladder (approx. 35 cm wide) can be mounted on the left or right. The all-round fall protection, the wide steps for safe climbing up and down, as well as the high-quality workmanship and good stability, distinguish this article. The height from the upper edge of the bed side to the upper edge of the fall protection is approx. 36 cm, with a max. mattress height of approx. 20 cm. The space under the bed can be used for playing or as storage space. The height from the floor to the lower edge of the bed side is approx. 72 cm. The distance between ladder and bedpost is approx. 157 cm. As floor space in the room you need approx. W: 210 x D: 106 cm. The height is approx. 114 cm. The bed is not suitable for children under 6 years. The decoration and the mattress are not included. The article is disassembled with assembly instructions for easy self-assembly. FSC® certified and built according to EN 747-2:2012+A1(2015).