About This Product

The Tigercub Magic Mansion is two stories of fun! Designed with the well-being of children in mind, featuring safety hinges and safety windows. The playhouse's 12mm shiplap tongue and groove shiplap cladding ensure it will look great in your garden for years, and heavy-duty roofing felt keeps it dry and protected in all seasons. Solid timber boards for the roof and floor mean it's durable enough to withstand rough play, and it is perfect for larger families.

Features

Tigercub collection
Safety Hinges
Magnetic Catch Door Closer
Heavy-Duty Mineral Felt
28x44mm Finish ‘Rounded 4 Corner’ Framing
12mm Shiplap T&G Groove Cladding & 12mm T&G Roof and Floor - NO OSB / Sheet Board
Made in the U.K. since 1913
Apply a high quality wood preserve internally and externally and ensure every inch even parts not on view are covered. To maintain warranty, reapply high quality wood preserver annually.
Kerbside Delivery
Unable to deliver to the following postcodes: KW, IV, PH, AB, DD, PA, FK, KY, DT, SA, TR ,PL, EX, TQ

Details

Product Type: Playhouse
Material: Solid Wood
Durability: Mold / Mildew Resistant
Subject: Cabin / Cottage
Overall Shape: Square
Maximum Occupancy: 2
Location: Outdoor
Window(s) Included: Yes
Loft Included: Yes
Doors Included: Yes
Floor Included: Yes
Pre-Stained: No
Colour: Burnt Orange
Product Care: Wooden sheds & summerhouses With most wooden sheds and structures the key to maintaining the building is ensuring that it remains on a firm and level base and protected against moisture penetration, Treat your building annually: Although it may come with a factory basecoat you should treat your new garden building shortly after installation with a good quality water resistant treatment. This process should then be repeated annually with care taken to brush the treatment into all wooden components involved within the construction of the building, inside and out. Ensure nothing is in contact with your building: Any overhanging tree or hedge growth poses a threat to your garden building and should be cut back at regular intervals. If a tree branch makes contact with your building it may pierce the roofing felt and encourage water ingress. You should also check for any leaves which may have collected on the roof and clear them as soon as possible. A build up of leaves or similar organic matter can hold water which could cause the felt to fail and leak. Check and replace any damaged felt: If you do find any damage sustained to your roofing felt over time it is essential that you act upon this without delay. Should you discover a rip or tear in the felt it is recommended that this area be stripped from the roof and a new covering of high grade, heavy duty, mineral felt (which can be purchased online and/or at most retail DIY stores) be affixed immediately. Check your base: You should have already ensured the base was perfectly level at point of assembly but it is important to monitor this is still the case. Any movement of the base under the building can lead to twisting of the timber or dropping of the doors. Lubrication: All hinges should be lubricated with suitable oil to ensure continued ease of use.
Number of Windows: 2
Construction Features: Window(s)
Built-In Features: Loft

Warranty

Product Warranty: Yes
Commercial Warranty: No
Warranty Length: 20 Years, 1 Year
Full or Limited Warranty: Limited
Warranty Details 2: "In general, our manufacturers offer a full 12-month parts warranty on all their products. The TIGER 20-year guarantee offers protection against general timber rot and decay – the guarantee does not cover the product against timber splits or warping which may occur naturally over time. To maintain the validity of this guarantee the product must be assembled strictly in accordance with the instructions supplied, treated inside and out once received and annually thereafter with an appropriate high quality preservative, and all glazing units must be sealed, inside and out, with silicone or other watertight sealant. For full guarantee terms, please see our Tiger 20-Year Guarantee Download. It is essential that all parts are checked on receipt - prior to assembly or the application of treatment - and any issues reported to the customer service team."