Rosalind Wheeler Fencing

Modern contemporary-shaped top single garden gate. Note: Listed sizes will fit a total post-to-post gap, the hinge and latch gaps have been accounted for, and the physical width is less than the listed size, see image. The shoulder height is 816mm and the overall height to the top of the bow is 942mm. Electro-galvanized for added rust resistance and powder-coated black, the finish must be inspected, and any chips touched up. The galvanizing is not a 100% rustproof guarantee. Like any outdoor metal product, it may need to be painted every couple of years to ensure a long life. Moving parts will need to be touched up regularly. Fittings supplied can be fixed to brick walls, metal, or wooden posts. Comes with angle brackets, bolts, and a wall-mounted pad-lockable catch. No screws included. Nuts and bolts must be painted after fitting to prevent the onset of rust. Made from solid metal frames 25mm x 8mm and infill bars 10mm and 6mm diameter. Search Wayfair for optional Lepine ball tops or flat tops 50mm or 70mm square x 1400mm long concrete-in blank metal posts are available to purchase.

Really lovely looking gate. Finishes our new drive off.. Rose Green . Cheshire East. Sat Jul 25 2026

The ball-top metal garden railing panel is heavy-duty and high-quality. Fits a total post-to-post gap of 1830mm, we already account for the hinge gaps required. The physical width is 1810mm x 490mm high to top of ball finial. Electro-galvanized for added rust resistance and powder-coated black. The galvanizing is not a 100% rustproof guarantee. Like any outdoor metal product, it may need to be painted every couple of years to ensure a long life. Comes with angle brackets and bolts, but no screws. Nuts and bolts must be painted after fitting to prevent the onset of rust. Made from solid metal frames 25mm x 10mm and Infill bars 12mm in diameter. Optional bolt down metal posts available to purchase, Search Wayfair for Lepine Metal Post, for the 50mm square x 500mm high post, available in ball top or flat top.

I’m really pleased with this Begonia Ball Top Metal Garden Gate and the railing Panel. It looks attractive, feels sturdy, and adds a lovely decorative touch to the garden entrance without being too heavy or bulky. The metal finish gives it a smart, traditional look, and the ball top design makes it stand out nicely compared with plain gates. It was straightforward to fit and feels secure once installed. Overall, it’s a great value garden gate that combines style, practicality, and durability. I would happily recommend it.. Fojol. Northampton, GB. Mon Jul 06 2026

The ball-top metal garden fence panel is heavy-duty and high-quality fencing. Fits a total post-to-post gap of 1830mm, we already account for the hinge gaps required. The physical width is 1810mm. Size 1: The height to the top of the ball finial is 915mm with a frame height of 820mm. Size 2: The height to the top of the ball finial is 1220mm with a frame height of 1125mm. Electro-galvanized for added rust resistance and powder-coated black. The galvanizing is not a 100% rustproof guarantee. Like any outdoor metal product, it may need to be painted every couple of years to ensure a long life. Comes with angle brackets and bolts, but no screws. Nuts and bolts must be painted after fitting to prevent the onset of rust. Made from solid metal frames 25mm x 10mm and Infill bars 12mm in diameter. Optional posts available to purchase; For Size 1 search Wayfair for Lepine 960mm bolt down or 1400mm concrete-in flat top or ball top metal posts that are available to purchase; For Size 2 search Wayfair for Lepine 1600mm concrete-in flat top or ball top metal posts that are available to purchase. There is a choice of 50mm or 70mm square concrete-in metal posts available. For Size 1 on level ground select 1400mm long posts and for sloping ground select 1600mm long posts. For Size 1 level hard surfaces bolt-down posts can be used, 50mm square x 960mm high.

Good heavyweight quality, excellent finish. Michael. West Somerton Great Yarmouth, GB. Mon Aug 10 2026

Quality scroll patterned garden gate. Is a lighter-duty gate that does not compromise on build quality. Note: Listed sizes fit a total post-to-post GAP, the hinge and latch gaps are already accounted for. The physical width of the gates is less than the listed width, see the images. There is no adjustment on the hinges on this gate so the total GAP needs to be as per the listed sizes. Frame height is 812mm and 914mm overall height to the top of scrolls. Electro-galvanized for added rust resistance and powder-coated black, the finish must be inspected and any chips touched up. The galvanizing is not a 100% rustproof guarantee. Like any outdoor metal product, it may need to be painted every couple of years to ensure a long life. Moving parts will need to be touched up regularly. It comes with angle brackets, bolts, a rocker latch, and a wall-mounted catch, but no screws. Nuts and bolts must be painted after fitting to prevent the onset of rust. Made from solid metal frames 20mm x 6mm and infill bars 10mm diameter. Search Wayfair for optional Lepine 50mm or 70mm square x 1400mm long concrete-in metal posts that are available to purchase.

The delivery was an hour earlier than expected unfortunately it was disappointing as the delivery man left my package in another court area. I had to knock every door to check for my package. They sent a pic of package but it wasn't clear to find out which place.. Surjit. Wellingborough. Wed Sep 17 2025

The scroll single garden gate is a heavy-duty high-quality gate. Note: listed sizes fit a total POST TO POST GAP, the hinge and latch gaps are already accounted for. The physical width of the gate is less than the listed width. Frame height is 820mm and the overall height to the top of scrolls is 914mm. Electro-galvanized for added rust resistance and powder-coated black, the finish must be inspected and any chips touched up. The galvanizing is not a 100% rustproof guarantee. Like any outdoor metal product, it may need to be painted every couple of years to ensure a long life. Moving parts will need to be touched up regularly. It comes with angle brackets, bolts, a rocker latch, and a wall-mounted catch, but no screws. Nuts and bolts must be painted after fitting to prevent the onset of rust. Made from solid metal frames 25mm x 10mm and infill bars 12mm diameter. Search Wayfair for optional LEPINE 50mm or 70mm square x 1400mm long concrete-in metal posts that are available to purchase.

Good quality, well priced with prompt professional delivery Highly recommended. Steve Gilham. Nw England. Sat Jul 11 2026

Modern contemporary single garden gate. Note: The listed sizes fit a total post-to-post gap, the hinge and latch gaps are already accounted for. The physical width of the gates is less than the listed width, see the image of the selected size. The top frame height is 812mm. Electro-galvanized for added rust resistance and powder-coated black, the finish must be inspected. And any chips touched up. The galvanizing is not a 100% rustproof guarantee. Like any outdoor metal product, it may need to be painted every couple of years to ensure a long life. Moving parts will need to be touched up regularly. Fittings supplied can be used on brick walls, metal, or wooden posts. It comes with angle brackets, bolts, a rocker latch, and a wall-mounted catch, but no screws. Nuts and bolts must be painted after fitting to prevent the onset of rust. Search Wayfair for optional Lepine ball tops or flat tops 50mm or 70mm square x 1400mm long concrete-in blank metal posts are available to purchase.

Perfect! Exactly what I wanted and cheaper than any other competitors listing the exact same item. High quality and looks durable. Good delivery and well packaged.. Ceri. South Wales. Mon Aug 17 2026

The ball-top single garden gate is heavy-duty, high-quality metal. Note: The listed sizes fit a total post-to-post GAP, the hinge and latch gaps are already accounted for. The physical width of the gates is less than the listed GAP width, see images for exact sizes. The height to the top of the ball finial is 915mm. The frame height is 820mm. Electro-galvanized for added rust resistance and powder-coated black, the finish must be inspected, and any chips touched up. The galvanizing is not a 100% rustproof guarantee. Like any outdoor metal product, it may need to be painted every couple of years to ensure a long life. Moving parts will need to be touched up regularly. Fittings supplied to fix brick walls, metal, or timber posts. It comes with angle brackets, bolts, a rocker latch, and a wall-mounted catch, but no screws. Nuts and bolts must be painted after fitting to prevent the onset of rust. Made from 25mm x 10mm solid metal frames and infill bars 12mm diameter. Search Wayfair for optional Lepine ball tops or flat tops 50mm or 70mm square x 1400mm long concrete in blank metal posts that are available to purchase.

I’m really pleased with this Begonia Ball Top Metal Garden Gate and the railing Panel. It looks attractive, feels sturdy, and adds a lovely decorative touch to the garden entrance without being too heavy or bulky. The metal finish gives it a smart, traditional look, and the ball top design makes it stand out nicely compared with plain gates. It was straightforward to fit and feels secure once installed. Overall, it’s a great value garden gate that combines style, practicality, and durability. I would happily recommend it.. Fojol. Northampton, GB. Mon Jul 06 2026

The spear (fleur-de-lys) top single garden gate is a heavy-duty high-quality metal gate. NOTE: Listed sizes fit a total POST TO POST GAP, the hinge and latch gaps are already accounted for. The physical width of the gate is less than the listed width. The height to the top of the spear finial is 950mm. The frame height is 820mm. Electro-galvanized for added rust resistance and powder-coated black, the finish must be inspected and any chips touched up. The galvanizing is not a 100% rustproof guarantee. Like any outdoor metal product, it may need to be painted every couple of years to ensure a long life. Moving parts will need to be touched up regularly. It comes with angle brackets, bolts, a rocker latch, and a wall-mounted catch, but no screws. Nuts and bolts must be painted after fitting to prevent the onset of rust. Made from solid metal frames 25mm x 10mm and Infill bars 12mm in diameter. Search Wayfair for optional LEPINE 50mm or 70mm square x 1400mm long concrete-in metal posts that are available to purchase.

Reasonably Priced Well made Good quality. Donna. Canterbury Kent, GB. Mon Sep 28 2026

If you want to have a beautiful and practical fence, then this product from Outsunny is for you. This outdoor fence contains eight ground stakes, which can be inserted into the ground for easy set-up. With the elegant and chic vine design, the decorative fences will be an eye-catching addition to your patio or yard. It can be used as a garden fence, a space partition, or just a patio decoration. Keep your flowers or yard safe with this beautifully designed fencing for backyard from Outsunny.- Can be used as a garden fence, a border edging, a space partition, or just a patio decoration. - Metal frame with powder-coating, so it's suitable for outdoor use. - Plug the ground stakes in the ground for easy set-up and stability. - The combined angle of the two fences can be adjusted at will. - Easy to assembly with the interlocking design.- Colour: Black. - Material: Metal. - Overall Size: 352L x 143H cm. - Single Sheet Size: 88L x 110H cm. - Thickness: 0.8cm. - Item Label: 8522919B655D4CB38182E7A17DCCF7FE.

Overall, very impressive product for the money. A little fiddly to put together but with a little patience and alignment this fencing is strong and sturdy. Negatives: A little fiddly to put together however this was maybe because I was putting in gravel! Really pleased with this to section off my vegetable patch from my dog. Positives: solid metal, not at all flimsy! There is a gap at the bottom which isn't a problem for me but maybe for others.. Daisy. Drayton, GB. Fri May 01 2026

The garden gate is a budget lighter-duty gate that does not compromise on build quality. NOTE: The listed sizes fit a total POST TO POST GAP, the hinge and latch gaps are already accounted for. The physical width of the gates is less than the listed width, see respective images. Frame height is 812mm and overall height is 914mm to the top of scrolls. Electro-galvanized for added rust resistance and powder-coated black, the finish must be inspected, and any chips touched up. The galvanizing is not a 100% rustproof guarantee. Like any outdoor metal product, it may need to be painted every couple of years to ensure a long life. Moving parts will need to be touched up regularly. Fittings supplied to fix brick walls, metal, or timber posts. It comes with angle brackets, bolts, a rocker latch, and a wall-mounted catch, but no screws. Nuts and bolts must be painted after fitting to prevent the onset of rust. Made from solid metal frames 20mm x 6mm and infill bars 10mm diameter. Search Wayfair for optional Lepine ball tops or flat tops 50mm or 70mm square x 1400mm long concrete-in blank metal posts are available to purchase.

Quality product and good value. A. Maidenhead, GB. Sun Jul 26 2026

The metal spear fleur-de-lys top garden fence panel is heavy-duty and high-quality fencing. Fits a total post-to-post gap of 1830mm, we already account for the hinge gaps required. The physical width is 1810mm. The height to the top of the spear finial is 950mm. The frame height is 820mm. Electro-galvanized for added rust resistance and powder-coated black, the finish must be inspected and any chips touched up. The galvanizing is not a 100% rustproof guarantee. Like any outdoor metal product, it may need to be painted every couple of years to ensure a long life. Fittings supplied can be fitted to brick piers, and metal or wooden posts. Comes with angle brackets and bolts, but no screws. Nuts and bolts must be painted after fitting to prevent the onset of rust. Made from solid metal frames 25mm x 10mm and Infill bars 12mm diameter. Search Wayfair for optional Lepine flat top or ball top metal posts are available to purchase as follows; Optional 50mm or 70mm square concrete-in metal posts. For level ground select 1400mm long posts or for sloping ground select 1600mm long posts. For level hard surfaces optional 50mm square x 960mm blank bolt-down posts are available.

Well made, aesthetically pleasing to the eye Reasonably priced.. Donna. Canterbury Kent, GB. Mon Sep 28 2026

The ball-top arched metal garden railing panel is heavy-duty and has high-quality fencing. Fits a total POST-TO POST GAP of 1830mm, we already account for the hinge gaps required. The physical width is 1810mm. The height to the top of the ball finial is 455mm rising to 625mm in the centre. The side frame height is 362mm. Electro-galvanized for added rust resistance and powder-coated black, the finish must be inspected, and any chips touched up. The galvanizing is not a 100% rustproof guarantee. Like any outdoor metal product, it may need to be painted every couple of years to ensure a long life. Comes with angle brackets and bolts, but no screws. Nuts and bolts must be painted after fitting to prevent the onset of rust. Made from solid metal frames 25mm x 10mm and Infill bars 12mm in diameter. Search Wayfair for optional LEPINE 50mm square x 500mm high bolt-down metal posts available to purchase.

Very nice quality, strong and beautiful design and I love the size. No foul smell. Perfect for my new garden!. Sheikha. London, GB. Sat Jul 18 2026

The garden gate is a budget lighter-duty gate that does not compromise on build quality. Note: The listed sizes fit a total post-to-post gap, the hinge and latch gaps are already accounted for. The physical width of the gates is less than the listed width, see respective images. Physical height to the top of the bow as listed. The hinge frame height is 812mm. If the gap does not suit then run timber down one or both sides to suitably close the gap down. Electro-galvanized for added rust resistance and powder-coated black, the finish must be inspected, and any chips touched up. The galvanizing is not a 100% rustproof guarantee. Like any outdoor metal product, it may need to be painted every couple of years to ensure a long life. Moving parts will need to be touched up on a regular basis. Fittings supplied can be fixed to brick walls, metal, or timber posts. It comes with angle brackets, bolts, a rocker latch, and a wall-mounted catch, but no screws. Nuts and bolts must be painted after fitting to prevent the onset of rust. Made from solid metal frames 20mm x 6mm and infill bars 10mm diameter. Search Wayfair for optional Lepine ball tops or flat tops 50mm or 70mm square x 1400mm long concrete-in blank metal posts are available to purchase.

Excellent product at the right price. I could not find a matching product that met my requirement anywhere but at wayfair. Well done and thank you for the fast delivery.. Anonymous. Wed May 06 2026

The scroll tall bow top single garden gate is a lighter-duty gate that does not compromise on build quality. Note: The listed sizes fit a total POST-to-POST GAP, the hinge and latch gaps are already accounted for. The physical width of the gates is less than the listed width, see the images for exact sizing. There is no adjustment on the hinges of this gate so your total GAP needs to be as per the selection. Physical height is listed to the top of the bow. The shoulder frame height is 1422mm. Electro-galvanized for added rust resistance and powder-coated black, the finish must be inspected and any chips touched up. The galvanizing is not a 100% rustproof guarantee. Like any outdoor metal product, it may need to be painted every couple of years to ensure a long life. Moving parts will need to be touched up regularly. It comes with angle brackets, bolts, a rocker latch, and a wall-mounted catch, but no screws. Nuts and bolts must be painted after fitting to prevent the onset of rust. Made from solid metal frames 20mm x 6mm and infill bars 10mm diameter. Search Wayfair for the LEPINE Post, for optional 50mm or 70mm square x 2350mm long concrete-in metal posts that are available to purchase.

Easy to install great fit just the job. Anonymous. Thu Jul 02 2026

The ball top low bow single garden gate is a heavy-duty high-quality metal gate. Note: Listed sizes fit a total Post to Post GAP, the hinge and latch gaps are already accounted for. The physical width of the gates is less than the listed GAP width. See the images foe exact physical sizes. The height to the top of the ball finial is 1041mm. The frame height at the shoulder is 820mm. Electro-galvanized for added rust resistance and powder-coated black, the finish must be inspected, and any chips touched up. The galvanizing is not a 100% rustproof guarantee. Like any outdoor metal product, it may need to be painted every couple of years to ensure a long life. Moving parts will need to be touched up regularly. Fittings supplied to fix brick walls, metal, or timber posts. It comes with angle brackets, bolts, a rocker latch, and a wall-mounted catch, but no screws. Nuts and bolts must be painted after fitting to prevent the onset of rust. Made from 25mm x 8mm solid metal frames and Infill bars 12mm diameter. Search Wayfair for optional LEPINE ball tops or flat tops 50mm or 70mm square x 1400mm long concrete-in blank metal posts are available to purchase.

Very strong metal gate, attention to details crafmanshiip, it also very flexible to some minor measurement adjustments, easy to order and no hidden bad spot. Anonymous. Sat Sep 05 2026

The garden gate is a lighter-duty gate that does not compromise build quality. Note: All gates listed sizes fit a total Post To Post Gap, the hinge and latch gaps are already accounted for. The physical width of the gates is less than the listed width, see images. The listed height is to the top of the bow. The shoulder height is 1422mm. Electro-galvanized for added rust resistance and powder-coated black, the finish must be inspected, and any chips touched up. The galvanizing is not a 100% rustproof guarantee. Like any outdoor metal product, it may need to be painted every couple of years to ensure a long life. Moving parts will need to be touched up regularly. Fittings supplied to fix brick walls, metal, or timber posts. It has angle brackets, bolts, a rocker latch, and a wall-mounted catch, but no screws. Nuts and bolts must be painted after fitting to prevent the onset of rust. Made from solid metal frames 20mm x 6mm and Infill bars 10mm diameter. Search Wayfair for optional Lepine ball tops or flat tops 50mm or 70mm square x 2350mm long concrete-in blank metal posts are available to purchase.

Quick delivery and easy to install. Anonymous. Thu Jul 02 2026

The spear fleur-de-lys top low bow single garden gate is a heavy-duty high-quality metal gate. Note: listed sizes fit a total POST TO POST GAP, the hinge and latch gaps are already accounted for. The physical width of the gate is less than the listed width. The height to the top of the spear finial is 1076mm. The frame height at the shoulder is 816mm. Electro-galvanized for added rust resistance and powder-coated black, the finish must be inspected and any chips touched up. The galvanizing is not a 100% rustproof guarantee. Like any outdoor metal product, it may need to be painted every couple of years to ensure a long life. Moving parts will need to be touched up regularly. It comes with angle brackets, bolts, a rocker latch, and a wall-mounted catch, but no screws. Nuts and bolts must be painted after fitting to prevent the onset of rust. Made from solid metal frames 25mm x 8mm and infill bars 12mm diameter. Search Wayfair for optional Lepine 50mm or 70mm square x 1400mm long concrete-in metal posts that are available to purchase.

I’m delighted with my gate. It has exceeded expectations. Nice detail on the top finials and well-made. Very good value, and the front path to my front door, has been transformed with this gate. Good delivery service and everything went according to plan.. Anonymous. Sat Jun 13 2026

The scroll metal garden railing panels are a budget lighter-duty panel that does not compromise on build quality. Fits a total post-to-post gap of 1830mm, we already account for the hinge gaps required. The physical height is 355mm. Electro-galvanized for added rust resistance and powder-coated black. Galvanizing is not a 100% rustproof guarantee if the coating is damaged or chipped it will need to be touched up. Fittings included to mount to brickwork or metal or wooden posts, no screws included. Nuts and bolts must be painted after fitting to prevent the onset of rust. Made from solid metal 20x6mm frames with 10mm diameter infill bars. Search Wayfair for optional Lepine 50mm square x 500mm high bolt-down blank metal posts that are available to purchase.

Very good quality. Janice. Rosliston Swadlincote, GB. Sat May 30 2026

The scroll low bow top single garden gate. Note: the listed sizes fit a total post-to-post gap, the hinge and latch gaps are already accounted for. The physical width of the gate is less than the listed width. Height 942mm to the top of the bow. The shoulder height is 812mm. Electro-galvanized for added rust resistance and powder-coated black, the finish must be inspected and any chips touched up. The galvanizing is not a 100% rustproof guarantee. Like any outdoor metal product, it may need to be painted every couple of years to ensure a long life. Moving parts will need to be touched up regularly. It comes with angle brackets, bolts, a rocker latch, and a wall-mounted catch, but no screws. Nuts and bolts must be painted after fitting to prevent the onset of rust. Made from solid metal frames 25mm x 8mm and infill bars 10mm diameter. Search Wayfair for optional LEPINE 50mm or 70mm square x 1400mm long concrete-in metal posts available to purchase.

Excellent garden gate good service quick delivery. Elizabeth. GB. Wed Dec 18 2024

This spear (fleur-de-lys) top tall garden gate is a heavy-duty high-quality metal gate. Note: The listed sizes fit a total post-to-post gap, the hinge and latch gaps are already accounted for. The physical width of the gate is less than the listed width. The physical height to the top of the spear finial is as listed. The shoulder frame height is 1772mm. Electro-galvanized for added rust resistance and powder-coated black, the finish must be inspected and any chips touched up. The galvanizing is not a 100% rustproof guarantee. Like any outdoor metal product, it may need to be painted every couple of years to ensure a long life. Moving parts will need to be touched up regularly. It has angle brackets, bolts, a rocker latch, and a wall-mounted catch, but no screws. Nuts and bolts must be painted after fitting to prevent the onset of rust. Made from solid metal frames 25mm x 10mm and infill bars 12mm diameter. Search Wayfair for optional Lepine 70mm square x 2350mm long concrete-in metal posts that are available to purchase.

Excellent quality and very easy to fit. Very pleased with it and also looks very good!. Laurentiu Cristian. Hailsham, GB. Sun Jul 26 2026

Modern contemporary tall-shaped top single garden gate. Note: The listed sizes fit a total post-to-post gap, the hinge and latch gaps are already accounted for. The physical width of the gates is less than the listed width, see respective images. The shoulder height is 1672mm and the overall height to the top of the bow is 1800mm. Electro-galvanized for added rust resistance and powder-coated black, the finish must be inspected, and any chips touched up. The galvanizing is not a 100% rustproof guarantee. Like any outdoor metal product, it may need to be painted every couple of years to ensure a long life. Moving parts will need to be touched up regularly. Fittings supplied can be fixed to brick walls, metal, or timber posts. Comes with angle brackets, bolts, and a wall-mounted pad-lockable catch. No screws included. Nuts and bolts must be painted after fitting to prevent the onset of rust and made from solid metal frames 25mm x 8mm and infill bars 10mm and 6mm in diameter. Optional Lepine ball top or flat top 50mm or 70mm square x 2350mm long concrete-in blank metal posts are available to purchase.

Nice design, reasonably strong, well made and appears well protected from the elements on the whole. Strange that some bolts and washers aren't black like the rest of the fittings. Instructions were pretty poor and unclear, with low quality photos. Latch was OK but with limited flexibility and some elements unclear again (why was there a locking ring under the wall piece that appeared impossible to use?). Anonymous. Mon Jul 13 2026

Pair of spear (fleur-de-lys) top arched metal driveway gates. They are heavy-duty high-quality driveway garden gates. The sizes listed are the total post-to-post gap that the gates will fit into, the hinge and latch gaps are already accounted for. The physical width of the gates is less than the listed width. The side shoulder height is 820mm rising to a central height of 1255mm on top of the spear finial. Electro-galvanized for added rust resistance and powder-coated black, the finish must be inspected and any chips touched up. The galvanizing is not a 100% rustproof guarantee. Like any outdoor metal product, it may need to be painted every couple of years to ensure a long life. Moving parts will need to be touched up regularly. It has angle brackets, bolts, a rocker latch, and a drop bolt, but no screws. Nuts and bolts must be painted after fitting to prevent the onset of rust. Made from solid metal frames 25mm x 10mm and infill bars 12mm diameter. Search Wayfair for optional Lepine 70mm square x 1400mm long concrete-in metal posts available to purchase.

I just love my gates they are perfect. Anonymous. Sun May 24 2026

Modern contemporary low bow top single garden gate. Note: Listed sizes fit a total post-to-post gap, the hinge and latch gaps are already accounted for. The physical width of the gate is less than the listed width. See the image of the selected size. The physical height to the top of the bow is as listed. The frame height under the bow top is 812mm. Electro-galvanized for added rust resistance and powder-coated black, the finish must be inspected, and any chips touched up. The galvanizing is not a 100% rustproof guarantee. Like any outdoor metal product, it may need to be painted every couple of years to ensure a long life. Moving parts will need to be touched up on a regular basis. Fittings supplied can be fitted to brick walls, metal, or wooden posts. It comes with angle brackets, bolts, a rocker latch, and a wall-mounted catch, but no screws. Nuts and bolts must be painted after fitting to prevent the onset of rust. Made from solid metal frames. Search Wayfair for optional Lepine ball tops or flat tops 50mm or 70mm square x 1400mm long concrete-in blank metal posts that are available to purchase.

This gate looks absolutely lovely in our new garden. Looks a million dollars. Solid and sturdy. Anonymous. Fri Jul 24 2026

The ball-top tall garden gate is a heavy-duty high-quality metal gate. Note: listed sizes fit a total post-to-post gap, the hinge and latch gaps are already accounted for. The physical width of the gates is less than the listed width, see images for exact sizes. Shoulder height is 1772mm. Overall height varies slightly as the width increases. Electro-galvanized for added rust resistance and powder-coated black, the finish must be inspected and any chips touched up. The galvanizing is not a 100% rustproof guarantee. Like any outdoor metal product, it may need to be painted every couple of years to ensure long life. Moving parts will need to be touched up on a regular basis. Fittings supplied to fix brick walls, metal, or timber posts. It comes with angle brackets, bolts, a rocker latch, and a wall-mounted catch, but no screws. Nuts and bolts must be painted after fitting to prevent the onset of rust. Made from solid metal frames 25mm x 10mm and infill bars 12mm in diameter. Search Wayfair for optional Lepine ball tops or flat tops 70mm square x 2350mm long concrete-in blank metal posts that are available to purchase.

Excellent quality for the price. Pleasant design. A great improvement on my aged wooden gate. Very well packaged. Would thoroughly recommend.. Anonymous. Fri May 22 2026

Modern contemporary metal garden railing panel. Fits a total post-to-post gap of 1830mm x 395mm high. Electro-galvanized for added rust resistance and powder-coated black. Galvanizing is not a 100% rustproof guarantee if the coating is damaged or chipped it will need to be touched up. Moving parts will need to be touched up on a regular basis. Fittings included to mount to brickwork or metal or wooden posts, no screws included. Nuts and bolts must be painted after fitting to prevent the onset of rust. Made from solid metal 25x8mm frames with 6mm and 10mm diameter infill bars. Search for optional Lepine 50mm square x 500mm high bolt-down blank metal posts which are available to purchase.

The Metal railings look great but only time will tell just how long they will as pristine. Will need to fit them once the wall has been built.. Anonymous. Tue May 19 2026

Modern contemporary metal garden fencing panel. Fits a total POST TO POST Gap of 1830mm x 812mm High. Electro-galvanized for added rust resistance and powder-coated black. Galvanizing is not a 100% rustproof guarantee if the coating is damaged or chipped it will need to be touched up. Moving parts will need to be touched up on a regular basis. Fittings included to mount to brickwork or metal or wooden posts, no screws included. Nuts and bolts must be painted after fitting to prevent the onset of rust. Made from solid metal 25x8mm frames with 6mm and 10mm diameter infill bars. Search Wayfair for optional LEPINE 50mm or 70mm square concrete-in metal posts that are available to purchase. For concrete-in posts, select 1400mm long for level ground or 1600mm long for sloping ground. The bolt-down post option is also available, select 960mm high posts, and ensure the ground condition is suitable for bolt down.

Lovely fence well packed and protected for delivery.. Anonymous. Wed Sep 30 2026

The scroll pair of driveway garden gates is a lighter-duty gate that does not compromise on build quality. Note: The listed sizes fit a total post-to-post gap, the hinge and latch gaps are already accounted for. The physical width of the gates is less than the listed width. Frame height is 812mm and 914mm to the top of scrolls. Electro-galvanized for added rust resistance and powder-coated black, the finish must be inspected, and any chips touched up. The galvanizing is not a 100% rustproof guarantee. Like any outdoor metal product, it may need to be painted every couple of years to ensure a long life. Moving parts will need to be touched up regularly. Fittings supplied can be fixed to brick walls, metal, or timber posts. It comes with angle brackets, bolts, a rocker latch, and 2 drop bolts, but no screws. Nuts and bolts must be painted after fitting to prevent the onset of rust. Made from solid metal frames 25mm x 6mm and infill bars 10mm diameter. Search Wayfair for optional Lepine ball tops or flat tops 70mm square x 1400mm long concrete-in blank metal posts available to purchase.

It appears to be the wrong accessory box It looks like it's for a single gate not double Eg no eye bolts included Could you phone my husband Graham Harris 07976 917187. Bernice. Godalming, GB. Thu May 23 2024

The ball-top metal driveway gates are a pair of heavy-duty high-quality garden gates. Note: The listed sizes fit a total post-to-post gap, the hinge and latch gaps are already accounted for. The physical width of the gates is less than the listed width. The side shoulder height is 820mm and 914mm to the top of the ball finial. The gap between the bars is between 85mm and 95mm. Electro-galvanized for added rust resistance and powder-coated black, the finish must be inspected and any chips touched up. The galvanizing is not a 100% rustproof guarantee. Like any outdoor metal product, it may need to be painted every couple of years to ensure a long life. Moving parts will need to be touched up regularly. Fittings supplied to fix brick walls, metal, or timber posts. It comes with angle brackets, bolts, rocker latch, and 2 drop bolts, but no screws. Nuts and bolts must be painted after fitting to prevent the onset of rust. Made from solid metal frames 25mm x 10mm and infill bars 12mm diameter. Search Wayfair for optional Lepine ball tops or flat tops 70mm square x 1400mm long concrete-in blank metal posts are available to purchase.

Great quality and great price. Paolo. Thu Aug 20 2026

Modern contemporary pair of garden driveway gates. Note: The listed sizes fit a total post-to-post gap, the hinge and latch gaps are already accounted for. The physical width of the gates is less than the listed width. The gate's physical height is 812mm. Electro-galvanized for added rust resistance and powder-coated black, the finish must be inspected and any chips touched up. The galvanizing is not a 100% rustproof guarantee. Like any outdoor metal product, it may need to be painted every couple of years to ensure a long life. Moving parts will need to be touched up regularly. Fittings supplied can be fixed to brick walls, metal, or wooden posts. It comes with angle brackets, bolts, a rocker latch, and 2 drop bolts. No screws included. Nuts and bolts must be painted after fitting to prevent the onset of rust. Made from solid metal frames 25mm x 8mm and infill bars 10mm and 6mm diameter. Search Wayfair for optional Lepine ball top or flat top 70mm square concrete-in metal posts that are available to purchase.

Really smart gates , very happy with them .. Anonymous. Sat Apr 25 2026

Modern contemporary tall bow top single garden gate. Note: listed sizes fit a total POST TO POST GAP, the hinge and latch gaps are already accounted for. The physical width of the gates is less than the listed width, see selected size image for measurements. Physical height to top of bow is as listed. The frame under the bow top height is 1422mm. Electro-galvanized for added rust resistance and powder coated black, the finish must be inspected and any chips touched up. The galvanizing is not a 100% rustproof guarantee. Like any outdoor metal product, it may need to be painted every couple of years to ensure long life. Moving parts will need to be touched up on a regular basis. Fittings supplied can be fixed to brick walls, metal or wooden posts. It comes with angle brackets, bolts, a rocker latch, and wall-mounted catch, but no screws. Nuts and bolts must be painted after fitting to prevent the onset of rust. Made from solid metal frames 25mm x 8mm and infill bars 10mm and 6mm diameter. Search Wayfair for optional Lepine ball top or flat top 50mm or 70mm square x 2350mm long concrete-in blank metal posts are available to purchase.

Great quality great price... Paolo. Sat Aug 29 2026

The metal spear fleur-de-lys top garden arched railing panel is heavy-duty and high-quality fencing. Fits a total POST TO POST GAP of 1830mm, we already account for the hinge gaps required. The physical width is 1810mm. Height to top of spear finial is 490mm rising to 660mm in the centre. Side frame height is 362mm. Electro-galvanized for added rust resistance and powder coated black, the finish must be inspected and any chips touched up. The galvanizing is not a 100% rustproof guarantee. Like any outdoor metal product, it may need to be painted every couple of years to ensure long life. Fittings supplied can be fitted to brick piers, metal, or timber posts. Comes with angle brackets and bolts, but no screws. Nuts and bolts must be painted after fitting to prevent the onset of rust. Made from solid metal frames 25mm x 10mm and Infill bars 12mm diameter. Search Wayfair for optional LEPINE 50mm square bolt-down metal posts are available to purchase.

Good quality competively priced.. Martin Vincent. Mon Apr 13 2026

The scroll metal garden railing panel is our better-quality scroll panel that does not compromise on build quality. Fits a total post-to-post gap of 1830mm, we already account for the hinge gaps required. The physical width is 1810mm. The physical height is 395mm. Electro-galvanized for added rust resistance and powder-coated black. Galvanizing is not a 100% rustproof guarantee if the coating is damaged or chipped it will need to be touched up. Fittings included to mount to brickwork or metal or wooden posts, no screws included. Nuts and bolts must be painted after fitting to prevent the onset of rust. Made from solid metal 20x6mm frames with 10mm diameter infill bars. Search Wayfair for optional Lepine 50mm square x 500mm high blank metal bolt-down posts that are available to purchase.

Great job. Martin. Wed Sep 07 2022

The best scroll railing range is a heavy-duty high-quality metal garden railing panel. Fits a total Post To Post Gap of 1830mm, we already account for the hinge gaps required. The physical width is 1810mm. The physical height is 403mm. Electro-galvanized for added rust resistance and powder-coated black. Galvanizing is not a 100% rustproof guarantee if the coating is damaged or chipped it will need to be touched up. Fittings included to mount to brickwork or metal or wooden posts, no screws included. Nuts and bolts must be painted after fitting to prevent the onset of rust. Made from solid metal 25x10mm frames with 12mm diameter infill bars. Search Wayfair for optional Lepine 50mm square x 500mm high blank metal bolt-down posts that are available to purchase.

This is for a pair of scroll-patterned driveway gates. They are lighter-duty but do not compromise build quality. Note: The listed sizes fit a total post-to-post gap, the hinge and latch gaps are already accounted for. The physical width of the gates is less than the listed width, see images for exact sizes. There is no adjustment on these gate hinges so the total GAP must be as per the listed sizes. If the gap does not suit then run timber down one or both sides to suitably close the gap down. Frame height is 812mm and 914mm overall height to the top of scrolls. Electro-galvanized for added rust resistance and powder-coated black, the finish must be inspected and any chips touched up. The galvanizing is not a 100% rustproof guarantee. Like any outdoor metal product, it may need to be painted every couple of years to ensure a long life. Moving parts will need to be touched up regularly. It comes with angle brackets, bolts, a rocker latch, and drop bolts, but no screws. Nuts and bolts must be painted after fitting to prevent the onset of rust. Made from solid metal frames 25mm x 6mm and infill bars 10mm diameter. Search Wayfair for optional Lepine 70mm square x 1400mm long concrete-in metal posts that are available to purchase.

these gates were perfect for job in hand well made for the price.. Terence. Sun Aug 02 2026

The ball-top arched metal gates are a pair of heavy-duty high-quality driveway garden gates. Note: Listed sizes fit a total post-to-post gap, the hinge and latch gaps are already accounted for. The physical width of the gates is less than the listed width. The side shoulder height is 820 mm rising to a central height of 1220 mm on top of the ball finial. Electro-galvanized for added rust resistance and powder-coated black, the finish must be inspected and any chips touched up. The galvanizing is not a 100% rustproof guarantee. Like any outdoor metal product, it may need to be painted every couple of years to ensure a long life. Moving parts will need to be touched up regularly. Fittings supplied to fix brick walls, metal, or timber posts. It comes with angle brackets, bolts, a rocker latch, and 2 drop bolts, but no screws. Nuts and bolts must be painted after fitting to prevent the onset of rust. Made from solid metal frames 25 mm x 10 mm and Infill bars 12mm in diameter. Search Wayfair for optional Lepine ball tops or flat tops 70 mm square x 1400 mm long concrete-in blank metal posts are available to purchase.

Great pair of gates , very happy. Paul Mc. Liverpool, GB. Wed Sep 30 2026

Create a safe board around your property with this garden fence! This powder-coated steel garden fence forms a sturdy perimeter barrier for your garden, home, and business property.

The pair of scroll patterned heavy-duty high-quality driveway garden gates. Note: The listed sizes fit a total post-to-post gap, the hinge and latch gaps are already accounted for. The physical width of the gates is less than the listed width. Frame height is 820mm and 914mm overall height to the top of scrolls. Electro-galvanized for added rust resistance and powder-coated black, the finish must be inspected and any chips touched up. The galvanizing is not a 100% rustproof guarantee. Like any outdoor metal product, it may need to be painted every couple of years to ensure a long life. Moving parts will need to be touched up regularly. It comes with angle brackets, bolts, a rocker latch, and a drop bolt, but no screws. Nuts and bolts must be painted after fitting to prevent the onset of rust. Made from solid metal frames 25mm x 10mm and infill bars 12mm diameter. Search Wayfair for optional Lepine 70mm square x 1400mm long concrete-in metal posts that are available to purchase.

Absolutely fantastic gates and for that the price they are the best value I was astounded by the quality of these gates and the are quite heavy Found them easy to fit and adjust. Anonymous. Thu Oct 09 2025

Brizendine scroll patterned tall bow top garden gate is a heavy-duty high-quality gate. Note: The listed sizes fit a total post-to-post gap, the hinge and latch gaps are already accounted for. The physical width of the gate is less than the listed width. Physical height to the top of the bow as listed. Frame height before the start of the bow is 1429mm. Electro-galvanized for added rust resistance and powder-coated black, the finish must be inspected and any chips touched up. The galvanizing is not a 100% rustproof guarantee. Like any outdoor metal product, it may need to be painted every couple of years to ensure a long life. Moving parts will need to be touched up regularly. It comes with angle brackets, bolts, a rocker latch, and a wall-mounted catch, but no screws. Nuts and bolts must be painted after fitting to prevent the onset of rust. Made from solid metal frames 25mm x 10mm and infill bars 12mm diameter. Search Wayfair for optional Lepine 70mm square x 2350mm long concrete-in metal posts that are available to purchase.

I love it! This is used as a sturdy trellis for fairy lights to give us more privacy when its dark x. Louise. Mon May 06 2024

Classic Hoop Top Metal Garden Fence Panel. The fencing is made from heavy-duty and high-quality metal. The panel fits a total post-to-post gap of 1830mm. The physical panel width is 1810mm and height to top of the hoops is 950mm. The frame height is 820mm. Product is electro-galvanized for added rust resistance and powder-coated black, the finish must be inspected and any chips touched up. The galvanizing is not a 100% rustproof guarantee. Like any outdoor metal product, it may need to be painted every couple of years to ensure a long life. Fittings supplied to fix brick walls, metal, or timber posts. Comes with angle brackets and bolts, but no screws. Nuts and bolts must be painted after fitting to prevent the onset of rust. Made from solid metal frames 25mm x 10mm and infill bars 12mm diameter. Search Wayfair for optional Lepine ball tops or flat-top blank metal posts available to purchase separately. If the fence is installed on level ground then purchase the 50mm sq or 70mm sq x 1400mm concrete-in posts. If the ground is sloping then you will require 50mm x 1600mm long concrete-in posts. The 960mm long bolt-down posts can be used with the fencing on level concrete surfaces.

Great looking gate to secure my border Value for money to complete my order!. Kev. Fareham. Sat Oct 14 2023

Classic Hoop Top Metal Garden Gate. The gate is made from heavy-duty and high-quality metal. The listed size of the gate fits a total Post to Post Gap of 1000mm because the hinge and latch gaps are already accounted for. The physical width of the gate is 900mm. The gate height to the top of the hoops is 950mm. The gate frame height is 820mm. Product is Electro-galvanized for added rust resistance and powder-coated black, the finish must be inspected and any chips touched up. The galvanizing is not a 100% rustproof guarantee. Like any outdoor metal product, it may need to be painted every couple of years to ensure a long life. Fittings supplied to fix brick walls, metal, or timber posts. Comes with angle brackets, bolts, latch and catch but no screws. Nuts and bolts must be painted after fitting to prevent the onset of rust. Made from solid metal frames 25mm x 10mm and infill bars 12mm diameter. Search Wayfair for optional Lepine ball tops or flat-top blank metal posts available to purchase separately. The gate suits the 50mm or 70mm square x 1400mm long concrete-in posts.

Great product, exactly what I needed. Delivered quickly.. Anonymous. Fri Jun 05 2026

Classic Hoop Top Metal Garden Railing Panel. The railing is made from heavy-duty and high-quality metal. The Railing panels fit a total post-to-post gap of 1830mm. The railing physical width is 1810mm and height to the top of the hoops is 492mm. The railing frame height is 362mm. The product is Electro-galvanized for added rust resistance and powder-coated black, the finish must be inspected and any chips touched up. The galvanizing is not a 100% rustproof guarantee. Like any outdoor metal product, it may need to be painted every couple of years to ensure a long life. Fittings supplied to fix brick walls, metal, or timber posts. Comes with angle brackets and bolts, but no screws. Nuts and bolts must be painted after fitting to prevent the onset of rust. Made from solid metal frames 25mm x 10mm and infill bars 12mm diameter. Search Wayfair for optional Lepine ball tops or flat-top blank metal posts available to purchase separately. The railing can be used with the 50mm x 500mm long bolt-down posts.

Great looking gate to secure my border Value for money to complete my order!. Kev. Fareham. Sat Oct 14 2023

Aluminium garden gates are a full privacy side gate with a vertical solid infill and flat top, providing a modern and streamlined design. Full privacy is a great option to ensure the maximum protection of your property. Aluminium is very strong, it is also lightweight which makes it a versatile material. This is perfect for the fabrication of gates compared to traditional metals such as; wrought iron, cast iron, wood or stainless steel. Another advantage of the aluminium garden gate is that it is very low maintenance. Aluminium is highly resistant to corrosion unlike other metals, it will not suffer from changing weather conditions and actually becomes stronger in low temperatures, perfect for UK buyers! NOTE: You need to add approx 30mm to the listed widths for the required hinge and latch gaps. KEY LOCKING OPTIONS the gate comes standard with a two keyed lock. There is an optional one side keyed and the other side a convenient twist lock. We will phone you to discuss if you want this option prior to dispatching the gate. In order to keep the aluminium gate looking brand new, simply wash down with soapy water and rinse. Fittings included; comes with Hinge brackets and bolts, door handles, latch and 2 keyed lock. (No screws or wall plugs included) Nuts and bolts must be painted after fitting to prevent the onset of rust. Optional aluminium posts can be purchased separately, search for 'Danquan Aluminium Gate Posts' for 100mm square x 2400mm long Hinge or Latch posts.

Kelly. Fri Jul 17 2026

This garden edging fence set adds an elegant touch to your outdoor space with its unique design. The smooth arch-shaped ironwork design creates a visually striking effect. It is not only an exquisite work of art but also a practical solution for garden boundaries. It can effectively protect your plants and flowers from children and animals, and it is also suitable as an animal barrier, vegetable fence, or even a roadside guard.

This garden gate, featuring a perfect combination of strength and elegance, makes an ideal entry point for the fence around your garden or patio.

Create a border around a flower bed, pathway, or yard with the Livingandhome garden fencing panel. Each panel is composed out of plastic material that is weather-resistant and easy to maintain. Designed with interlocking tabs that easily lock to one another, the fence can be easily set up. Not only are they great for adding a stylish touch to a garden, but also perfect for protecting flowers from pets and wild animals.

This high-quality, stylish fence gate is powder-coated to protect against rust and corrosion, which makes it an ideal entry point for the fence around your garden or patio.

Heavy-duty construction: This fence gate is made of corten steel. Corten steel, also known as weathering steel. This is anti-corrosive by its very nature. It develops a rusty protective layer against corrosion when first exposed to atmospheric conditions. Thus, you don't need to paint it. This can help you save on maintenance and repair costs. The distinctive brown colour on the corten steel will surely be an eye-catcher. Finally, weathering steel is exceptionally durable and will stand up to the test of time.